|
|
DE-9PVTIのメーカーはCinch Connectorsです、この部品の機能は「Connector」です。 |
部品番号 | DE-9PVTI |
| |
部品説明 | Connector | ||
メーカ | Cinch Connectors | ||
ロゴ | |||
このページの下部にプレビューとDE-9PVTIダウンロード(pdfファイル)リンクがあります。 Total 30 pages
www.DataSheet4U.com
D-SUBMINIATURE
D*KL Series
HTD/HPD Series
D*A Series
Overmold Kits
D*U Series
T* Series
Basic D Series
Series 1 - High Reliability
Series 3 - High Reliability
M24308 Series
Backshells/Junctionshells/Hoods
Accessories
Application Tooling
1 Page www.DataSheet4U.com
D-subminiature
Connectors
Information
Introduction
General Information
• All connectors are intermateable with any Cinch D-subminiature of comparable pin count and density, or the
D-sub connector of any other manufacturer complying dimensionally with MIL-C-24308.
• Solder terminations and boardlocks meet the requirements for solderability in accordance with MIL-STD-202,
Method 208.
• DURABILITY
- Mated connectors are subjected to cycles of insertions and withdrawals specified on the catalog
page. After the prescribed cycles the connectors will meet the Cinch requirements concerning insertion-
withdrawal force, individual contact insertion-withdrawal force, and contact resistance.
• APPROVALS
- Most Cinch connectors have UL recognition and CSA approval; however, the specific approvals are listed
on the individual catalog pages.
• CONTACTS
- Cinch connector contacts are generally offered in Gold Flash or 30µin. gold plating for commercial product,
and 50µin. gold plating for M24308 Series Military D-subminiature connectors.
- Cinch connectors utilize economical stamped and formed contacts and/or screw machine contacts for
enhanced performance.
- Standard density connectors utilize size 20 contacts.
- Cinch 1.5 Density Series connectors utilize size 22 contacts for greater density in a standard size
D-subminiature outer shell.
4 • METAL SHELLS
- Commercial-grade steel shells are usually available in zinc plating with yellow chromate finish or tin plating.
- Tin-plated plugs have grounding indents.
- Military grade M24308 Series connector shells are generally steel or in certain cases non-magnetic brass with
cadmium plating and yellow chromate finish.
- Insulator materials are glass-filled polyester, glass-filled nylon, and diallyl phthalate.
• The connectors are usually available in plugs and sockets in 9, 15, 25, 37, and 50 position sizes.
Call Toll Free: 1 (800) 323-9612
4-2
3Pages www.DataSheet4U.com
D-subminiature
Connectors
Information
Introduction
Contact Arrangements
Standard Density Plug Inserts
1.5 Density Plug Inserts
4
NOTE: Mating face of plug is shown; socket is mirror image.
4-5 Call Toll Free: 1 (800) 323-9612
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ DE-9PVTI データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
DE-9PVTI | Connector | Cinch Connectors |