|
|
FI-XBxS-HF10のメーカーはJapan Aviation Electronicsです、この部品の機能は「(FI-X/-A Series) Connector」です。 |
部品番号 | FI-XBxS-HF10 |
| |
部品説明 | (FI-X/-A Series) Connector | ||
メーカ | Japan Aviation Electronics | ||
ロゴ | |||
このページの下部にプレビューとFI-XBxS-HF10ダウンロード(pdfファイル)リンクがあります。 Total 3 pages
www.DataSheet4U.com
Connectors
Printed circuit boards
Board to cable
1.0mm Contact Spacing • For LCD interface for high speed differential transmission
SMT Type • P. C. Board to Cable Application • Single row
FI-X/FI-A Series Connectors
FEATURES
Board-to-cable application for high density packaging.
•• Small, low-profile SMT type receptacle 1.0 mm high on
board (FI-X/slotted mount type) and 0.6mm (FI-A/slotted
mount type).
For differential transmission.
• Precision impedance matching (100 ±10 ohms).
•• Pin headers come with hold-down for preventing float up
when soldering and offering additional retention on board.
The hold-down is incorporated with shell, enabling
connection to the ground on board.
• Receptacle with a ground plate on both ends of wire
terminal of contact, enabling connection to the ground on
board.
Design ensuring correct grounding.
•• Come in three types. Crimp type cable plug for discrete
wire, ZIF type for FPC, and fine-wire coaxial type.
(We can supply various cable harnessed connectors such
as twinax. For further information, consult JAE's sales
department)
• ZIF (zero insertion force) configuration for FPC applica-
tion. No force is directly applied when inserting FPC.
Easy to operate. The shell is connected to the ground on
one side of FPC when inserting it.
• Receptacles can be supplied in embossed tape allowing
automatic mounting.
APPLICATIONS
LCD interfaces, LCD inverter, PC, PDA, DVC, mobile phones, digital
still cameras, various state-of-the-art miniature devices
TYPES & COMBINATIONS
•FI-X: Click the button.
•FI-A: Click the button.
GENERAL SPECIFICATIONS
No. of Contacts
14 (specifically designed for
differential transmission/7 pairs)
14, 20, 30 (for fine-wire coaxial:20,30)
20 positions for FI-A
Current Rating
1 Amps
D.W.Voltage
Insulation
Resistance
Contact
Resistance
Applicable Wire
Operating
Temperature
500 VACr.m.s. (for one minute)
100 megohms min.
40 milliohms max.
#30 to #36 AWG (discrete wire)
#40 AWG (fine-wire coaxial)
1.0 mm pitch FPC/0.14 mm thick
-40°C to +80°C
* The products and specifications contained in this catalog are subject to change
without notice. When considering use of or placing an order for products
included in this catalog, please check first with our sales department.
1 Page www.DataSheet4U.com
TYPES & COMBINATIONS
Receptacle
FI-A Series
Plug
•For discrete wire
Crimp type
Without metallic shell
P/N : FI-A20H
1 0.6
(.039) (.024)
7.9(.311)
mm(inch)
1
(.039)
•Socket contact
Crimp type
P/N : FI-AC3-1-15000
•Slotted mount type
Right-angle
With metallic shell
P/N : FI-AB20S-HF06
1 0.6
(.039) (.024)
7.9(.311)
mm(inch)
Signal side
Ground side FPC 1
(.039)
1 0.6
(.039) (.024)
9(.354)
mm(inch)
1
(.039)
•ZIF design for FPC
With metallic shell
P/N : FI-A20M
•For fine-wire coaxial
With metallic shell
P/N : FI-A20C
•For fine-wire coaxial
Slider shell
P/N : FI-A20CH-10000
3Pages | |||
ページ | 合計 : 3 ページ | ||
|
PDF ダウンロード | [ FI-XBxS-HF10 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
FI-XBxS-HF10 | (FI-X/-A Series) Connector | Japan Aviation Electronics |