DataSheet.jp

0603Z5Uxxxxxx の電気的特性と機能

0603Z5UxxxxxxのメーカーはSynton-Techです、この部品の機能は「Multilayer Capacitors」です。


製品の詳細 ( Datasheet PDF )

部品番号 0603Z5Uxxxxxx
部品説明 Multilayer Capacitors
メーカ Synton-Tech
ロゴ Synton-Tech ロゴ 




このページの下部にプレビューと0603Z5Uxxxxxxダウンロード(pdfファイル)リンクがあります。
Total 27 pages

No Preview Available !

0603Z5Uxxxxxx Datasheet, 0603Z5Uxxxxxx PDF,ピン配置, 機能
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
1. SUBJECT : This specification applies on the chip capacitor made by
SYNTON-TECH’s Corporation
2. PART NUMBER : Part number of the chip capacitor is identified by the
size,dielectric, capacitance value,tolerance, voltage
CC-02-D
A
1
2006.09.01
Example : DESCRIPTION : 0603 NPO 100PF 50V J
SYNTON CODE : 0603 NPO 101 J 50V
SIZE
0402
0603
0805
1206
1210
1808
1812
2220
DIELECTRIC
NPO
X7R
Y5V
Z5U
CAPACITANCE
VALUE
3 Digits :
5R1 : 5.1PF
100 : 10PF
101 : 100PF
102 : 1NF
103 : 10NF
104 : 0.1UF
105 : 1UF
TOLERANCE
10PF and below
A: ±0.05PF
B : ±0.10PF
C : ±0.25PF
D : ±0.5PF
More than 10pF
F : ±1%
G : ±2%
J : ±5%
K : ±10%
M : ±20%
Z : -20~+80%
VOLTAGE
6.3V
10V
16V
25V
50V
100V
200V
250V
500V
1KV
2KV
3KV
4KV
APPROVED
Carol
CHECKED
May
DESIGNED
REMARK
Chen
9/11:SGS
DOCUMENT NO.
0201010200
Confidential, Do Not Disseminate.

1 Page





0603Z5Uxxxxxx pdf, ピン配列
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
CC-02-D
A
3
2006.09.01
4. MATERIALS AND PERFORMANCE CHARACTERIZATION
Designation
Temperature
compensating
NPO,COG
Intermediate K X7R,
BX
High K Y5V
High K Z5U
Class
I
II
II
II
Temperature Range ( )
-55 ~ +125
-55 ~ +125
-25 ~ +85
+10 ~ +85
Temp-Cap Change
± 30 ppm/
± 15 %
+22 ~ -82 %
+22 ~ -56 %
The T.C curve of each material. (for reference)
5. TECHNOLOGY
Multi-layer ceramic capacitor constructed by depositing alternative layers
of ceramic dielectric materials and internal metallic electrodes, by advanced
ceramic manufacturing technology, and co-firing into an indestructible
homogeneous body, then completed with application of metal end terminations
which are fired on to assure that permanent connection of individual internal
electrodes are in parallel.
The terminations also can be nickel-plated and then solder plated to give the
chip capacitors nickel-barrier terminations which have much better leaching
resistance during soldering.
Reliable performances are built-in through exact formulation of dielectric powders, preparation of
conductive paste, advanced automatic manufacturing, and strict
quality control to assure excellent control in dielectric thickness, electrode integrity,
and electrode-to-termination continuity.
Confidential, Do Not Disseminate.


3Pages


0603Z5Uxxxxxx 電子部品, 半導体
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
CC-02-D
A
6
2006.09.01
8. ENVIRONMENTAL AND TEST CHARACTERISTICS
Test item
Conditions
Requirements
Capacitance
tan δ
Insulation resistance
Voltage proof
Adhesion
Bond strength of end
face plating
Resistance
soldering heat
to
Resistance
leaching
to
Solderability
Rapid change of
temperature
NPO/X7R: measuring voltage 1 V at 25
Y5V/Z5U: measuring voltage 1 V at 25
C 1000 pF, f = 1 MHz;
C > 1000 pF, f = 1 kHz;
NPO/X7R: measuring voltage 1 V at 25
Y5V/Z5U: measuring voltage 1 V at 25
C 1000 pF, f = 1 MHz;
C > 1000 pF, f = 1 kHz;
Vr (rated voltage)500V
At Vr (rated voltage) for 1 minute
Vr (rated voltage)500V
At 500V for 1 minute
Vr (rated voltage) 100V
At 2.5Vr for 5 seconds
Vr (rated voltage) =200/250V
At 1.5Vr+100V for 5 seconds
Vr (rated voltage) 500V
At 1.2Vr for 5 seconds
A force of 5 N shall be applied to the line
joining the terminations and in a plane
parallel to the substrate
time: 10 ± 1 s
Mounting in accordance with IEC 384 10,
para 4.4 conditions: bending 1 mm at a rate
of 1 mm/s
260 ± 5 for 10 + 0.5 s
260 ± 5 for 30 ± 1 s in static solder bath
Zero hour test, and test after storage (20 to
24 months) in original atmosphere in normal
atmosphere;
un-mounted chips completely immersed for 2
± 0.5 s in a solder bath of 235 ± 5 .
NPO/X7R: -55 to +125 , 5 cycle
Y5V: -25 to +85 , 5 cycle
Z5U: +10 to +85 , 5 cycle
Duration: 30 mins.
Recovery: 24 ± 2 hrs.
Within specified tolerance
In accordance with specification
In accordance with specification
No breakdown
No flashover
No visible damage
No visible damage
NPO:C/C within ±1 %
X7R/Z5U:C/C within ±10 %
Y5V:C/C within ±30 %
The terminations must be well tinned, after
recovery.
NPO:C/C 0.5 % or ± 0.5 pF
X7R: -5% < ∆C/C 10%
Y5V/Z5U: -10% < ∆C/C 20%
whichever is greater.
With visual enlargement of x 10, dissolution of
the terminations should not exceed 10 %
The terminations must be well tinned
No visible damage after 24 h recovery
ClassI NPO: C/C 1 % or 1 pF
X7R: C/C ≤ ±15 %
Y5V/Z5U: C/C ≤ ±20 %
Confidential, Do Not Disseminate.

6 Page



ページ 合計 : 27 ページ
 
PDF
ダウンロード
[ 0603Z5Uxxxxxx データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
0603Z5Uxxxxxx

Multilayer Capacitors

Synton-Tech
Synton-Tech


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap