|
|
D75206CWのメーカーはNECです、この部品の機能は「upD75206」です。 |
部品番号 | D75206CW |
| |
部品説明 | upD75206 | ||
メーカ | NEC | ||
ロゴ | |||
このページの下部にプレビューとD75206CWダウンロード(pdfファイル)リンクがあります。 Total 62 pages
www.DataSheet4U.com
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75206
4-BIT SINGLE-CHIP MICROCOMPUTER
DESCRIPTION
The µPD75206 is a microcomputer with a CPU capable of 1-, 4-, and 8-bit-wise data processing, a ROM, a RAM,
I/O ports, a fluorescent display tube controller/driver, a watch timer, a timer/pulse generator capable of outputting
14-bit PWM, a serial interface and a vectored interrupt function integrated on a single-chip.
It uses the VCR, ECR and CD fluorescent display tubes as display devices and is most suitable for applications
requiring the timer/watch function and high-speed interrupt servicing. It can help to provide the unit with many
functions and to decrease performance costs.
With the µPD75206, the µPD75P216A, 75P218 one-time PROM products are available for system development
evaluation or small production.
5
Detailed functions, etc. are described in the following user's manual. Be sure to read the manual for designing.
µPD75216A User's Manual: IEM-988
FEATURES
• Architecture equal to that of an 8-bit microcomputer
• High-speed operation : Minimum instruction execution time : 0.95 µs (when operated at 4.19 MHz)
• Instruction execution time variable function realizing a wide range of operating voltages
• On-chip large-capacity program memory : 6K bytes
• Watch operation with an ultra low current consumption : 5µA TYP. (at the 3 V operation)
• On-chip programmable fluorescent display tube controller/driver
• Timer function : 4 ch
• 14-bit PWM output capability with the voltage synthesizer type electronic tuner
• Buzzer output capability
• Interrupt function with importance attached to applications
• For power-off detection
• For remote controlled reception
• Product with an on-chip PROM : µPD75P216A, µPD75P218 (on-chip EPROM : WQFN package)
ORDERING INFORMATION
Ordering Code
Package
Quality Grade
5
5
µPD75206CW-×××
µPD75206GF-×××-3BE
64-pin plastic shrink DIP (750 mil)
64-pin plastic QFP (14 × 20 mm)
Standard
Standard
Please refer to “Quality grade on NEC Semiconductor Devices” (Document number IEI-1209) published by
NEC Corporation to know the specification of quality grade on the devices and its recommended applications.
Document No. IC-1876A
(O. D. No. IC-6969C)
Date Published August 1993 P
Printed in Japan
The information in this document is subject to change without notice.
The mark 5 shows major revised points.
© NEC Corporation 1991
1 Page www.DataSheet4U.com
µPD75206
CONTENTS
1. PIN CONFIGURATION (TOP VIEW) ....................................................................................................... 5
2. BLOCK DIAGRAM ................................................................................................................................... 6
3. PIN FUNCTIONS ......................................................................................................................................7
3.1 PORT PINS ......................................................................................................................................................... 7
3.2 NON-PORT PINS ............................................................................................................................................... 8
3.3 PIN INPUT/OUTPUT CIRCUIT LIST ................................................................................................................. 9
3.4 UNUSED PINS TREATMENT ......................................................................................................................... 10
3.5 P00/INT4 PIN AND RESET PIN OPERATING PRECAUTIONS .................................................................... 11
3.6 XT1, XT2 AND P50 PIN OPERATING PRECAUTIONS ................................................................................ 11
4. µPD75206 ARCHITECTURE AND MEMORY MAP.............................................................................. 12
5. PERIPHERAL HARDWARE FUNCTIONS ............................................................................................. 14
5.1 PORTS .............................................................................................................................................................. 14
5.2 CLOCK GENERATOR CIRCUIT ...................................................................................................................... 15
5.3 BASIC INTERVAL TIMER ............................................................................................................................... 16
5.4 WATCH TIMER ................................................................................................................................................ 17
5.5 TIMER/EVENT COUNTER............................................................................................................................... 18
5.6 TIMER/PULSE GENERATOR .......................................................................................................................... 19
5.7 SERIAL INTERFACE ........................................................................................................................................ 20
5.8 FIP CONTROLLER/DRIVER ............................................................................................................................. 22
5.9 POWER-ON FLAG (MASK OPTION) ............................................................................................................. 23
6. INTERRUPT FUNCTIONS ...................................................................................................................... 23
7. STANDBY FUNCTIONS ......................................................................................................................... 25
8. RESET FUNCTIONS ............................................................................................................................... 25
9. INSTRUCTION SET ................................................................................................................................ 26
10. MASK OPTION SELECTION ..................................................................................................................35
11. APPLICATION BLOCK DIAGRAM ........................................................................................................................... 36
11.1 VCR TIMER TUNER ........................................................................................................................................ 36
11.2 COMPACT DISK PLAYER ............................................................................................................................... 37
11.3 ECR ................................................................................................................................................................... 37
12. ELECTRICAL SPECIFICATIONS .............................................................................................................................. 38
3
3Pages TI0/P13
PPO
SI/P03
SO/P02
SCK/P01
INT0/P10
INT1/P11
INT2/P12
INT4/P00
BASIC
INTERVAL
TIMER
INTBT
TIMER/EVENT
COUNTER
#0
INTT0
TIMER/PULSE
GENERATOR
INTTPG
SERIAL
INTERFACE
INTSIO
INTERRUPT
CONTROL
PROGRAM
COUNTER(13)
ROM
PROGRAM
MEMORY
6016 x 8 BITS
ALU
DECODE
AND
CONTROL
CY SP(8)
BANK
GENERAL REG.
RAM
DATA MEMORY
369 × 4 BITS
INTW
WATCH
TIMER
fX/2N
CLOCK
DIVIDER
SYSTEM CLOCK
GENERATOR
SUB MAIN
STAND BY
CONTROL
CPU CLOCK
Φ
BUZ/P23
XT1 XT2 X1 X2
VDD VSS RESET
PORT0
PORT1
4 P00–P03
4 P10–P13
PORT2
PORT3
PORT4
PORT5
PORT6
4 P20–P23
4 P30–P33
4 P40–P43
4 P50–P53
4 P60–P63
10 T0–T9
T10/PH3–
4 T13/PH0
FIP
CONTROLLER/
DRIVER
2
T14/S11,
T15/S10
10 S0–S9
VPRE
VLOAD
INTKS
PORTH
4 PH0–PH3
6 Page | |||
ページ | 合計 : 62 ページ | ||
|
PDF ダウンロード | [ D75206CW データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
D75206CW | upD75206 | NEC |