|
|
Número de pieza | 232219314821 | |
Descripción | Power Metal Film Resistors | |
Fabricantes | Vishay Intertechnology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 232219314821 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! www.DPatRaSh0ee1t4/U0.c2om/03
Vishay BCcomponents
Power Metal Film Resistors
FEATURES
• High power in small packages (1 W/0207 size to
3 W/0617 size)
• Different lead materials for different applications
• Defined interruption behaviour
• Lead (Pb)-free solder contacts
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
APPLICATIONS
• All general purpose power applications
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper or copper-clad iron are welded to the end-caps. The
resistors are coated with a red, nonflammable lacquer which
provides electrical, mechanical and climatic protection. This
coating is not resistant to aggressive fluxes. The
encapsulation is resistant to all cleaning solvents in
accordance with “MIL-STD-202E, method 215”, and
“IEC 60068-2-45”.
TECHNICAL SPECIFICATIONS
DESCRIPTION
Resistance range2)
Resistance tolerance and series
Maximum dissipation at Tamb = 70 °C:
R<1Ω
1Ω≤R
Thermal resistance (Rth)
Temperature coefficient
Maximum permissible voltage
Basic specifications
Climatic category (IEC 60068)
Stability after:
load
climatic tests
soldering
PR01
0.22 Ω to 1 MΩ
0.6 W
1W
135 K/W
350 V
VALUE
PR02
Cu-lead
FeCu-lead
0.33 Ω to 1 MΩ
1 Ω to 1 MΩ
PR03
Cu-lead
FeCu-lead
0.68 Ω to 1 MΩ
1 Ω to 1 MΩ
± 1 % (E24, E96 series); ± 5 % (E24 series); see note 1
1.2 W
−
2 W 1.3 W
75 K/W
115 K/W
≤ ± 250 × 10-6/K
500 V
IEC 60115-1 and 60115-4
55/155/56
1.6 W
3W
60 K/W
750 V
−
2.5 W
75 K/W
ΔR max.: ± (5 % R + 0.1 Ω)
ΔR max.: ± (3 % R + 0.1 Ω)
ΔR max.: ± (1 % R + 0.05 Ω)
Notes
1. 1 % tolerance is available for Rn-range from 1 R upwards.
2. Ohmic values (other than resistance range) are available on request.
3. R value is measured with probe distance of 24 ± 1 mm using 4- terminal method.
www.vishay.com
98
For technical questions, contact: [email protected]
Document Number: 28729
Revision: 14-Aug-06
1 page www.DPatRaSh0ee1t4/U0.c2om/03
Vishay BCcomponents
Power Metal Film Resistors
MASS PER 100 UNITS
TYPE
PR01 Cu 0.6 mm
PR01 FeCu 0.6 mm
PR02 Cu 0.8 mm
PR02 FeCu 0.6 mm
PR02 FeCu 0.8 mm
PR03 Cu 0.8 mm
PR03 FeCu 0.6 mm
PR03 FeCu 0.8 mm
MASS
(g)
21.2
20.7
50.4
40.6
49.6
119.2
107.9
118.5
MARKING
The nominal resistance and tolerance are marked on the
resistor using four colored bands in accordance with IEC
publication 60062, “Color codes for fixed resistors”.
OUTLINES
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (“IEC publication 60294”).
MOUNTING
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
MOUNTING PITCH
TYPE
LEAD STYLE
PR01
straight leads
radial taped
double kink large pitch
double kink small pitch
PR02
straight leads
radial taped
double kink large pitch
double kink small pitch
PR03
straight leads
double kink large pitch
double kink small pitch
Note
1. Recommended minimum value.
PITCH
mm
12.51)
4.8
17.8
12.5
15.01)
4.8
17.8
15.0
23.01)
25.4
20.0
e
51)
2
7
5
61)
2
7
6
91)
10
8
FUNCTIONAL DESCRIPTION
PRODUCT CHARACTERIZATION
Standard values of nominal resistance are taken from the E96/E24 series for resistors with a tolerance of ± 1 % or ± 5 %.
The values of the E96/E24 series are in accordance with “IEC publication 60063”.
FUNCTIONAL PERFORMANCE
1.00
P
(W)
0.75
0.50
0.25
Tamb = 40 °C
70 °C
100 °C
125 °C
155 °C
2.00
P
(W)
1.50
1.00
0.50
Tamb = 40 °C 70 °C
100 °C
125 °C
155 °C
1000100000h0 h
205 °C
Tm (°C)
>
< <301kkΩΩ
30 kΩ
100010000h01000h0 h
220 °C
Tm (°C)
> <393<9k1ΩkkΩΩ
10 5.0 2.0 1.0 0.5 0.2 0.1 % ΔR
PR01 Drift nomogram
10 5.0
2.0 1.0 0.5 0.2 0.1 % ΔR
PR02 Drift nomogram
3.00
P
(W)
2.25
1.50
0.75
10100010000000h0hh
Tamb = 40 °C 70 °C
100 °C
125 °C
155 °C
> ≤515<1k1ΩkkΩΩ
250 °C
Tm (°C)
10 5.0
2.0 1.0 0.5 0.2 0.1 % ΔR
PR03 Drift nomogram
LIMITING VALUES
TYPE
LEAD
MATERIAL
RANGE
LIMITING
VOLTAGE1)
(V)
LIMITING
POWER
(W)
PR01
PR02
PR03
Cu
Cu
FeCu
Cu
FeCu
R<1Ω
1Ω≤R
R<1Ω
1Ω≤R
1Ω≤R
R<1Ω
1Ω≤R
1Ω≤R
350
500
750
0.6
1.0
1.2
2.0
1.3
1.6
3.0
2.5
Note
1. The maximum voltage that may be continuously applied to the
resistor element, see “IEC publication 60115-1”.
The maximum permissible hot-spot temperature is 205 °C for PR01,
220 °C for PR02 and 250 °C for PR03.
www.vishay.com
102
For technical questions, contact: [email protected]
Document Number: 28729
Revision: 14-Aug-06
5 Page www.DPatRaSh0ee1t4/U0.c2om/03
Vishay BCcomponents
Power Metal Film Resistors
100
ΔT
(K)
80
60
40
15 mm
20 mm
25 mm
200
ΔT
(K)
160
120
80
20 40
0
0
Ø 0.8 mm FeCu-leads
0.8
1.6 P (W)
Minimum distance from resistor body to PCB = 1 mm
2.4
PR02 Temperature rise (ΔT) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
100
ΔT
(K)
80
15 mm
20 mm
60
25 mm
40
20
0
0
Ø 0.8 mm Cu-leads
1
2 P (W) 3
PR03 Hot-spot temperature rise (ΔT) as a function of
dissipated power.
240
ΔT
(K)
200
160
120
80
40
0
0
Ø 0.8 mm Cu-leads
1
2 P (W)
Minimum distance from resistor body to PCB = 1 mm
3
PR03 Temperature rise (ΔT) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
100
ΔT
(K)
80
10 mm
60 15 mm
20 mm
40
25 mm
20
0
0
Ø 0.6 mm FeCu-leads
1
2 P (W) 3
PR03 Hot-spot temperature rise (ΔT) as a function of
dissipated power.
240
ΔT
(K)
200
160
120
80
40
0
0
Ø 0.6 mm FeCu-leads
1
2 P (W)
Minimum distance from resistor body to PCB = 1 mm
3
PR03 Temperature rise (ΔT) at the lead end (soldering point) as a
function of dissipated power at various lead lengths after mounting.
Application Information
0
0
Ø 0.8 mm FeCu-leads
1
2 P (W) 3
PR03 Hot-spot temperature rise (ΔT) as a function of
dissipated power.
www.vishay.com
108
For technical questions, contact: [email protected]
Document Number: 28729
Revision: 14-Aug-06
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet 232219314821.PDF ] |
Número de pieza | Descripción | Fabricantes |
232219314821 | Power Metal Film Resistors | Vishay Intertechnology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |