|
|
PDF 596290899 Data sheet ( Hoja de datos )
| Número de pieza | 596290899 | |
| Descripción | Stand Microcircuit Drawing Source Approval Bulletin | |
| Fabricantes | Military Part | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 596290899 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
LTR
REVISIONS
DESCRIPTION
A Updated boilerplate. Added device types 09 - 13. Moved endurance
and data retention testing requirements from Section 4 of drawing to
Section 3 of drawing. Editorial changes throughout.
B Updated boilerplate. Added vendor CAGE 01295 as a source of
supply. Editorial changes throughout. - glg
C Changed standoff width on "U" package. Added vendor CAGE
0EU86 as a source of supply. - glg
DATE (YR-MO-DA)
94-03-25
APPROVED
M. A. Frye
98-04-16
99-11-16
Raymond Monnin
Raymond Monnin
REV
SHEET
REV
CCCCCCCCCC
SHEET
15 16 17 18 19 20 21 22 23 24
REV STATUS
OF SHEETS
REV
SHEET
CCCCCCCCCCCCC C
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PMIC N/A
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
PREPARED BY
Gary L. Gross
CHECKED BY
Ray Monnin
APPROVED BY
Michael A. Frye
DRAWING APPROVAL DATE
92-08-31
AMSC N/A
REVISION LEVEL
C
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216
MICROCIRCUIT, MEMORY, DIGITAL, CMOS
128K X 8 BIT FLASH EEPROM, MONOLITHIC SILICON
SIZE
A
CAGE CODE
67268
SHEET
1
OF
5962-90899
24
DSCC FORM 2233
APR 97
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
5962-E050-00
1 page  
www.DataSheet4U.com
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-
38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The modification in
the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M
shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as
specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class
M.
3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein and figure 1.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.
3.2.3 Truth tables. The truth tables shall be as specified on figure 3.
3.2.3.1 Unprogrammed devices. The truth table for unprogrammed devices for contracts involving no altered item
drawing shall be as specified on figure 3 herein. When required, in screening (see 4.2 herein), or quality conformance
inspection groups A, B, C, or D (see 4.4 herein), the devices shall be programmed by the manufacturer prior to test in a
checkerboard or similar pattern (a minimum of 50 percent of the total number of bits programmed).
3.2.3.2 Programmed devices. The requirements for supplying programmed devices are not part of this document.
3.2.3.3 Command definitions. The command definitions table shall be as specified on figure 3.
3.2.4 Switching test circuits and waveforms. The switching test circuits and waveforms shall be as specified on figure 4.
3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the
electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the
full case operating temperature range.
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The
electrical tests for each subgroup are defined in table I.
3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be
marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to space
limitations, the manufacturer has the option of not marking the "5962-" on the device. For RHA product using this option, the
RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535.
Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A.
3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required
in MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.
3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535
listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of
compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see
6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this
drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535
and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.
3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or
for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.
3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 -
herein) involving devices acquired to this drawing is required for any change as defined in MIL-STD-973.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
C
5962-90899
SHEET
5
5 Page 
www.DataSheet4U.com
Case T
NOTE: Metric equivalents are given in parenthesis.
Symbol
A
A1
A2
AB3
CP
D
D1
D2
E
E1
E2
e
R
N
Inches
Min Max
.057
.080
.122
.159
.010
.014
.055
.065
.014
.018
.000
.004
.540
.565
.400
.500
.440
.464
.300
.400
.043
.057
0.027
0.033
Millimeters
Min Max
1.45
2.03
3.10
4.04
0.25
0.36
1.38
1.65
0.36
0.46
0.00
0.10
13.72
14.35
10.16
12.70
11.17
11.79
7.62
10.16
1.09
1.45
0.68
0.84
32
FIGURE 1. Case outlines.
Notes
Solid lid
Solid lid
Reference
Reference
Typical
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
C
5962-90899
SHEET
11
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet 596290899.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 596290899 | Stand Microcircuit Drawing Source Approval Bulletin | Military Part |
| 59629089909 | Stand Microcircuit Drawing Source Approval Bulletin | Military Part |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |