|
|
267M5002xxxxのメーカーはMatsuo Electronicsです、この部品の機能は「(267M Series) Capacitors」です。 |
部品番号 | 267M5002xxxx |
| |
部品説明 | (267M Series) Capacitors | ||
メーカ | Matsuo Electronics | ||
ロゴ | |||
このページの下部にプレビューと267M5002xxxxダウンロード(pdfファイル)リンクがあります。 Total 8 pages
SOLID-ELECTROLYTE TANTALUM CAPACITORS
www.DataSheet4U(.TcAomNCHIP® SERIES)
TYPE 267M
Epoxy resin molding chip
Standard Series
CAUTIONS
• This capacitor is polarized, do not apply reverse voltage.
• The sum of peak value of AC and DC voltage should not exceed the
rated voltage.
• This catalog is designed for providing general information. Please
inquire of our Sales Department to confirm specifications prior to use.
CHARACTERISTICS
ITEM
CHARACTERISTICS
Failure rate level
Operating temperature range
Rated voltage
Capacitance range
Capacitance tolerance
1%/1000h
Ϫ55ϳϩ85°C to ϩ125°C with voltage derating
4Ϫ6.3Ϫ10Ϫ16Ϫ20Ϫ25Ϫ35Ϫ50VDC
0.047ϳ220µF
±10%, ±20%
Available capacitance tolerance ±5%(J) upon request.
Type 267 is specially designed to
SMD, based on our technology of
chip tantalum capacitors acquired
over many years. Fully-molded con-
struction provides excellent mechan-
ical protection, superior moisture
resistance and high soldering heat
resistance.
L
P1 P2 P1
DIMENSIONS
[A case]
W
[D3, H case]
W
[B case]
W
mm
[C3, E case]
W
FEATURES
1. Small size: A case 3.2ϫ1.6mm
2. Suitable for surface mounting.
3. Precise dimensions allow high
density mounting. Symmetrical
construction of positive and
negative terminals provides “Self
Alignment”.
4. Soldering: 260°C for 10 second
by re-flow or flow soldering.
5. #376 series of 267M, which are
low ESR(Equivalent Series
Resistance) series, were devel-
oped to meet recent customer's
requirement in high ripple current
applications such as DC/DC con-
verter, switching regulator, per-
sonal computer, etc.
Case code EIA code L ± 0.2 W ± 0.2 T ± 0.2
A
3216
3.2
1.6
1.6
B
3528
3.5
2.8
1.9
C3 6032 6.0 3.2 2.5
D3 7343 7.3 4.4 2.8
H
7343H
7.3
4.4
4.1
E
7257
7.3
5.8
3.5
A, B, C3, D3 Case is in conformity with EIA-535BAAC.
E Case is in conformity with EIA-535BAAD.
P1 ± 0.2
0.75
0.8
1.3
1.3
1.3
1.3
P2 min.
1.4
1.5
3.0
4.0
4.0
4.0
C ± 0.1
1.2
2.2
2.2
2.4
2.4
3.5
NOTIFICATIONS FOR USE
Please inquire of our Sales
Department for your suitable solder-
ing or cleaning conditions.
MATSUO ELECTRIC CO., LTD.
1 Page SOLID-ELECTROLYTE TANTALUM CAPACITORS
www.DataSheet4U(.TcAomNCHIP® SERIES)
TYPE 267M
Epoxy resin molding chip
Standard Series
RATINGS AND CATALOG NUMBERS (STANDARD Series)
Rated voltage 4VDC/Surge voltage 5VDC
Rated voltage 6.3VDC/Surge voltage 8VDC
Rated voltage 10VDC/Surge voltage 13VDC
Catalog number
cap. case Max DC Lct. (µA)
Max Dissipation factor Max ESR(Ω)
(µF) code 25°C 85°C 125°C –55°C 25°C 85°C 125°C 100kHz
267M 4001 335 ᮀ1ᮀ2
3.3 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.2
267M 4001 475 ᮀ1ᮀ2 533 4.7 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.3
267M 4001 106 ᮀ1ᮀ2
10 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.9
267M 4001 156 ᮀ1ᮀ2 533 15 B 0.5 6 7.5 0.08 0.06 0.06 0.06 2.9
267M 4001 226 ᮀ1ᮀ2 720 22 C3 0.7 9 11 0.08 0.06 0.06 0.06 0.55
267M 4001 336 ᮀ1ᮀ2 720 33 C3 1.1 13 17 0.08 0.06 0.06 0.06 0.55
267M 4001 476 ᮀ1ᮀ2 720 47 C3 1.5 19 24 0.08 0.06 0.06 0.06 0.55
267M 4001 686 ᮀ1ᮀ2 720 68 D3 2.2 27 34 0.08 0.06 0.06 0.06 0.45
267M 4001 107 ᮀ1ᮀ2 720 100 D3 3.2 40 50 0.10 0.08 0.08 0.08 0.47
267M 4001 157 ᮀ1ᮀ2
150 H 6.0 60 75 0.15 0.08 0.08 0.10 0.27
267M 4001 157 ᮀ1ᮀ2 720 150 E 4.8 60 75 0.10 0.08 0.08 0.08 0.28
267M 4001 227 ᮀ1ᮀ2
220 H 8.8 88 110 0.15 0.08 0.08 0.10 0.27
267M 4001 227 ᮀ1ᮀ2 720 220 E 7.0 88 110 0.10 0.08 0.08 0.08 0.27
267M 6301 225 ᮀ1ᮀ2
2.2 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.2
267M 6301 335 ᮀ1ᮀ2 533 3.3 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.3
267M 6301 685 ᮀ1ᮀ2
6.8 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.9
267M 6301 106 ᮀ1ᮀ2 533 10 B 0.5 6 7.9 0.08 0.06 0.06 0.06 2.9
267M 6301 156 ᮀ1ᮀ2 720 15 C3 0.8 9 12 0.08 0.06 0.06 0.06 1.15
267M 6301 226 ᮀ1ᮀ2 720 22 C3 1.1 14 17 0.08 0.06 0.06 0.06 0.55
267M 6301 336 ᮀ1ᮀ2 720 33 C3 1.7 21 26 0.08 0.06 0.06 0.06 0.55
267M 6301 476 ᮀ1ᮀ2 720 47 D3 2.4 30 37 0.08 0.06 0.06 0.06 0.45
267M 6301 686 ᮀ1ᮀ2 720 68 D3 3.4 43 54 0.08 0.06 0.06 0.06 0.47
267M 6301 686 ᮀ1ᮀ2
68 H 4.3 43 54 0.08 0.06 0.06 0.06 0.37
267M 6301 107 ᮀ1ᮀ2
100 H 6.3 63 79 0.10 0.08 0.08 0.08 0.28
267M 6301 107 ᮀ1ᮀ2 720 100 E 5.0 63 79 0.10 0.08 0.08 0.08 0.28
267M 6301 157 ᮀ1ᮀ2
150 H 9.5 95 119 0.15 0.08 0.08 0.10 0.27
267M 6301 157 ᮀ1ᮀ2 720 150 E 7.6 95 118 0.10 0.08 0.08 0.08 0.27
267M 1002 155 ᮀ1ᮀ2
1.5 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.2
267M 1002 225 ᮀ1ᮀ2 533 2.2 A 0.4 5 6.3 0.08 0.06 0.06 0.06 7.3
267M 1002 475 ᮀ1ᮀ2
4.7 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.9
267M 1002 685 ᮀ1ᮀ2 533 6.8 B 0.5 7 8.5 0.08 0.06 0.06 0.06 2.9
267M 1002 106 ᮀ1ᮀ2 720 10 C3 0.8 10 13 0.08 0.06 0.06 0.06 1.15
267M 1002 156 ᮀ1ᮀ2 720 15 C3 1.2 15 19 0.08 0.06 0.06 0.06 1.15
267M 1002 226 ᮀ1ᮀ2 720 22 C3 1.8 22 28 0.08 0.06 0.06 0.06 0.55
267M 1002 336 ᮀ1ᮀ2 720 33 D3 2.6 33 41 0.08 0.06 0.06 0.06 0.95
267M 1002 476 ᮀ1ᮀ2 720 47 D3 3.8 47 59 0.08 0.06 0.06 0.06 0.47
267M 1002 686 ᮀ1ᮀ2
68 H 6.8 68 85 0.08 0.06 0.06 0.08 0.40
267M 1002 686 ᮀ1ᮀ2 720 68 E 5.4 68 85 0.08 0.06 0.06 0.06 0.38
267M 1002 107 ᮀ1ᮀ2
100 H 10 100 130 0.15 0.08 0.08 0.10 0.37
267M 1002 107 ᮀ1ᮀ2 720 100 E 8.0 100 125 0.10 0.08 0.08 0.08 0.27
ᮀ1 capacitance tolerance code “K” (±10%) or “M” (±20%)
ᮀ2 taping code “R” (“N”) or “L” (“P”)
Pull direction “R” (“N”) is standard.
Development
MATSUO ELECTRIC CO., LTD.
3Pages SOLID-ELECTROLYTE TANTALUM CAPACITORS
www.DataSheet4U(T.cAomNCHIP® SERIES)
TYPE 267M
Epoxy resin molding chip
Low ESR Series
CAUTIONS
• This capacitor is polarized, do not apply reverse voltage.
• The sum of peak value of AC and DC voltage should not exceed the
rated voltage.
• This catalog is designed for providing general information. Please
inquire of our Sales Department to confirm specifications prior to use.
RATINGS AND CATALOG NUMBERS (Low ESR Series)
Rated voltage 4VDC/Surge voltage 5VDC
Rated voltage 6.3VDC/Surge voltage 8VDC
Rated voltage 10VDC/Surge voltage 13VDC
Catalog number
cap. case Max DC Lct. (µA)
Max Dissipation factor Max ESR(Ω)
(µF) code 25°C 85°C 125°C –55°C 25°C 85°C 125°C 100kHz
267M 4001 335 ᮀ1ᮀ2 376 3.3 A 0.4 5 6.3 0.08 0.06 0.06 0.06 4.2
267M 4001 475 ᮀ1ᮀ2 378 4.7 A 0.4 5 6.3 0.08 0.06 0.06 0.06 3.8
267M 4001 106 ᮀ1ᮀ2 376 10 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.2
267M 4001 156 ᮀ1ᮀ2 378 15 B 0.5 6 7.5 0.08 0.06 0.06 0.06 2.2
267M 4001 226 ᮀ1ᮀ2 377 22 C3 0.7 9 11 0.08 0.06 0.06 0.06 0.5
267M 4001 336 ᮀ1ᮀ2 377 33 C3 1.1 13 17 0.08 0.06 0.06 0.06 0.5
267M 4001 476 ᮀ1ᮀ2 377 47 C3 1.5 19 24 0.08 0.06 0.06 0.06 0.45
267M 4001 686 ᮀ1ᮀ2 377 68 D3 2.2 27 34 0.08 0.06 0.06 0.06 0.35
267M 4001 107 ᮀ1ᮀ2 377 100 D3 3.2 40 50 0.10 0.08 0.08 0.08 0.37
267M 4001 157 ᮀ1ᮀ2 377 150 E 4.8 60 75 0.10 0.08 0.08 0.08 0.25
267M 4001 227 ᮀ1ᮀ2 377 220 E 7.0 88 110 0.10 0.08 0.08 0.08 0.22
267M 6301 225 ᮀ1ᮀ2 376 2.2 A 0.4 5 6.3 0.08 0.06 0.06 0.06 4.2
267M 6301 335 ᮀ1ᮀ2 378 3.3 A 0.4 5 6.3 0.08 0.06 0.06 0.06 3.8
267M 6301 685 ᮀ1ᮀ2 376 6.8 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.2
267M 6301 106 ᮀ1ᮀ2 378 10 B 0.5 6 7.9 0.08 0.06 0.06 0.06 2.2
267M 6301 156 ᮀ1ᮀ2 377 15 C3 0.8 9 12 0.08 0.06 0.06 0.06 0.6
267M 6301 226 ᮀ1ᮀ2 377 22 C3 1.1 14 17 0.08 0.06 0.06 0.06 0.5
267M 6301 336 ᮀ1ᮀ2 377 33 C3 1.7 21 26 0.08 0.06 0.06 0.06 0.45
267M 6301 476 ᮀ1ᮀ2 377 47 D3 2.4 30 37 0.08 0.06 0.06 0.06 0.35
267M 6301 686 ᮀ1ᮀ2 377 68 D3 3.4 43 54 0.08 0.06 0.06 0.06 0.37
267M 6301 107 ᮀ1ᮀ2 377 100 E 5.0 63 79 0.10 0.08 0.08 0.08 0.25
267M 6301 157 ᮀ1ᮀ2 377 150 E 7.6 95 118 0.10 0.08 0.08 0.08 0.22
267M 1002 155 ᮀ1ᮀ2 376 1.5 A 0.4 5 6.3 0.08 0.06 0.06 0.06 4.2
267M 1002 225 ᮀ1ᮀ2 378 2.2 A 0.4 5 6.3 0.08 0.06 0.06 0.06 3.8
267M 1002 475 ᮀ1ᮀ2 376 4.7 B 0.4 5 6.3 0.08 0.06 0.06 0.06 2.2
267M 1002 685 ᮀ1ᮀ2 378 6.8 B 0.5 7 8.5 0.08 0.06 0.06 0.06 2.2
267M 1002 106 ᮀ1ᮀ2 377 10 C3 0.8 10 13 0.08 0.06 0.06 0.06 0.6
267M 1002 156 ᮀ1ᮀ2 377 15 C3 1.2 15 19 0.08 0.06 0.06 0.06 0.6
267M 1002 226 ᮀ1ᮀ2 377 22 C3 1.8 22 28 0.08 0.06 0.06 0.06 0.45
267M 1002 336 ᮀ1ᮀ2 377 33 D3 2.6 33 41 0.08 0.06 0.06 0.06 0.35
267M 1002 476 ᮀ1ᮀ2 377 47 D3 3.8 47 59 0.08 0.06 0.06 0.06 0.37
267M 1002 686 ᮀ1ᮀ2 377 68 E 5.4 68 85 0.08 0.06 0.06 0.06 0.25
267M 1002 107 ᮀ1ᮀ2 377 100 E 8.0 100 125 0.10 0.08 0.08 0.08 0.22
ᮀ1 capacitance tolerance code “K” (±10%) or “M” (±20%)
ᮀ2 taping code “R” (“N”) or “L” (“P”)
Pull direction “R” (“N”) is standard.
MATSUO ELECTRIC CO., LTD.
6 Page | |||
ページ | 合計 : 8 ページ | ||
|
PDF ダウンロード | [ 267M5002xxxx データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
267M5002xxxx | (267M Series) Capacitors | Matsuo Electronics |