UP62-70 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 UP62-70
部品説明 (UP62-x0) Solid State Relays
メーカ Carlo Gavazzi
ロゴ Carlo Gavazzi ロゴ 

Total 1 pages

No Preview Available !

UP62-70 Datasheet, UP62-70 PDF,ピン配置, 機能
Solid State Relays
Type UP 62 - ..
• Temperature limit switch for overheat
protection of small assemblies.
Product Description
Ordering Key
The temperature limit switch is
a readily available accessory.
It is a thermostat especially
designed for overheat protec-
tion for small assemblies.
The thermal response is excel-
lent due to its miniaturized
housing. It becomes an effec-
tive thermal cutout due to the
fact that this limit switch can
be fitted close to the heatsink
of the relay.
again when the temperature
drops (approx. 30°C) below
its cutout value.
In the RZ3 relay, the TLS can
be connected to two free (in-
ternally non-connected) termi-
nals (B1/B2).
Thermal compound must be
added when inserting the TLS
(to guarantee a fast thermal
Thermostat type
Switch temperature
Type Selection
Switch temperature
UP 62-70
UP 62-80
UP 62-90
When connected serial with
the control voltage, the TLS
will switch off the relay as
soon as the operating temper-
ature of the switch is reached.
The relay will be activated
The heatsink selection charts
(load current versus ambient
temperature) for RSO types
provide information about
which thermal switch to use.
The UP 62 - .. is mounted
in one of the two slots of
the 3-phase SSR housing.
UP 62 - 90
70°C (158°F)
80°C (176°F)
90°C (194°F)
Specifications are subject to change without notice (30.09.2005)

1 Page

ページ 合計 : 1 ページ
[ UP62-70.PDF ]


Link :



(UP62-x0) Solid State Relays

Carlo Gavazzi
Carlo Gavazzi    |   2020   |  メール    |   最新    |   Sitemap