DataSheet.jp

HLCP-C100 の電気的特性と機能

HLCP-C100のメーカーはAVAGO TECHNOLOGIESです、この部品の機能は「(HLCP-x100) LED Light Bars」です。


製品の詳細 ( Datasheet PDF )

部品番号 HLCP-C100
部品説明 (HLCP-x100) LED Light Bars
メーカ AVAGO TECHNOLOGIES
ロゴ AVAGO TECHNOLOGIES ロゴ 




このページの下部にプレビューとHLCP-C100ダウンロード(pdfファイル)リンクがあります。

Total 16 pages

No Preview Available !

HLCP-C100 Datasheet, HLCP-C100 PDF,ピン配置, 機能
www.DataSheet4U.com
HLCP-A100
LED Light Bars
Data Sheet
HLCP-A100/-B100/-C100/D100/-E100/-F100/-G100/-H100
HLMP-2300/-2350/-2400/-2450/-2500/-2550
HLMP-2600/-2620/-2635/-2655/-2670/-2685
HLMP-2700/-2720/-2735/-2755/-2770/-2785
HLMP-2800/-2820/-2835/-2855/-2870/-2885
HLMP-2950/-2965
Description
The HLCP-X100 and HLMP-2XXX series light bars
are rectangular light sources designed for a variety of
applications where a large bright source of light is
required. These light bars are configured in single-
in-line and dual-in-line packages that contain either
single or segmented light emitting areas. The AlGaAs
Red HLCP-X100 series LEDs use double hetero-
junction AlGaAs on a GaAs substrate. The HER
HLMP-2300/2600 and Yellow HLMP-2400/2700 series
LEDs have their p-n junctions diffused into a GaAsP
epitaxial layer on a GaP substrate. The Green HLMP-
2500/2800 series LEDs use a liquid phase GaP
epitaxial layer on a GaP substrate. The bicolor HLMP-
2900 series use a combination of HER/Yellow or HER/
Green LEDs.
Features
• Large bright, uniform light emitting areas
• Choice of colors
• Categorized for light output
• Yellow and Green categorized for dominant
wavelength
• Excellent ON-OFF contrast
• X-Y stackable
• Flush mountable
• Can be used with panel and legend mounts
• Light emitting surface suitable for legend attachment
per Application Note 1012
• HLCP-X100 Series designed for low current operation
• Bicolor devices available
Applications
• Business machine message annunciators
• Telecommunications indicators
• Front panel process status indicators
• PC board identifiers
• Bar graphs

1 Page





HLCP-C100 pdf, ピン配列
Part Numbering System
HLCP - xx xx - xx x xx
HLMP - xx xx - xx x xx
Mechanical Options[1]
00: No mechanical option
Color Bin Options[1,2]
0: No color bin limitation
B: Color bins 2 & 3 (applicable for yellow devices only)
C: Color bins 3 & 4 only (applicable for green devices only)
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Specific Configuration[1]
Refer to respective data sheet
Color[1]
x1: AlGaAs Red (applicable for HLCP-x100 only)
23: High Efficiency Red
24: Yellow
25: Green
26: High Efficiency Red
27: Yellow
28: Green
29: Bicolor (High Efficiency Red/Yellow) OR (High Efficiency Red/Green)
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
3


3Pages


HLCP-C100 電子部品, 半導体
Absolute Maximum Ratings
Parameter
Average Power Dissipated per LED Chip
Peak Forward Current per LED Chip
Average Forward Current per LED Chip
DC Forward Current per LED Chip
Reverse Voltage per LED Chip
Operating Temperature Range
Storage Temperature Range
Wave Soldering Temperature
1.6 mm (1/16 inch) below Body
AlGaAs Red
HLCP-X100
Series
37 mW[1]
45 mA[4]
15 mA
15 mA[1]
5V
–20°C to +100°C[7]
HER
HLMP-2300/
2600/29XX
Series
Yellow
HLMP-2400/
2700/2950
Series
135 mW[2]
85 mW[3]
90 mA[5]
60 mA[5]
25 mA
20 mA
30 mA[2]
25 mA[3]
6 V[6]
–40°C to +85°C
–40°C to +85°C
Green
HLMP-2500/
2800/2965
Series
135 mW[2]
90 mA[5]
25 mA
30 mA[2]
–20°C to +85°C
250°C for 3 seconds
Notes:
1. Derate above 87°C at 1.7 mW/°C per LED chip. For DC operation, derate above 91°C at 0.8 mA/°C.
2. Derate above 25°C at 1.8 mW/°C per LED chip. For DC operation, derate above 50°C at 0.5 mA/°C.
3. Derate above 50°C at 1.8 mW/°C per LED chip. For DC operation, derate above 60°C at 0.5 mA/°C.
4. See Figure 1 to establish pulsed operation. Maximum pulse width is 1.5 mS.
5. See Figure 6 to establish pulsed operation. Maximum pulse width is 2 mS.
6. Does not apply to bicolor parts.
7. For operation below –20°C, contact your local Avago sales representative.
Electrical/Optical
Characteristics
at
T
A
=
25°C
AlGaAs Red HLCP-X100 Series
Parameter
HLCP-
Luminous Intensity
per Lighting Emitting
Area[1]
A100/D100/E100
B100/C100/F100/G100
H100
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage per LED
Reverse Breakdown Voltage per LED
Thermal Resistance LED Junction-to-Pin
Symbol Min. Typ. Max. Units Test Conditions
IV 3 7.5
6 15
mcd IF = 3 mA
mcd
λPEAK
λd
VF
VR
RθJ-PIN
12 30
mcd
645 nm
637 nm
1.8 2.2
V
5 15
V
250 °C/W/
LED
IF = 20 mA
IR = 100 µA
6

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ HLCP-C100 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HLCP-C100

(HLCP-x100) LED Light Bars

Agilent
Agilent
HLCP-C100

(HLCP-x100) LED Light Bars

AVAGO TECHNOLOGIES
AVAGO TECHNOLOGIES


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap