DataSheet.jp

HEDS-9000 の電気的特性と機能

HEDS-9000のメーカーはAgilentです、この部品の機能は「(HEDS-9x00) Two Channel High Resolution Optical Incremental Encoder Modules」です。


製品の詳細 ( Datasheet PDF )

部品番号 HEDS-9000
部品説明 (HEDS-9x00) Two Channel High Resolution Optical Incremental Encoder Modules
メーカ Agilent
ロゴ Agilent ロゴ 




このページの下部にプレビューとHEDS-9000ダウンロード(pdfファイル)リンクがあります。

Total 11 pages

No Preview Available !

HEDS-9000 Datasheet, HEDS-9000 PDF,ピン配置, 機能
www.DataSheet4U.com
Two Channel High Resolution
Optical Incremental Encoder
Modules
Technical Data
HEDS-9000/9100/9200
Extended Resolution
Series
Features
• High Resolution: Up to 2048
Cycles per Revolution
• Up to 8192 Counts per
Revolution with 4X Decoding
• Two Channel Quadrature
Output
• Low Cost
• Easy to Mount
• No Signal Adjustment
Required
• Small Size
• -40°C to 100 °C Operating
Temperature
• TTL Compatible
• Single 5 V Supply
Description
The HEDS-9000 Options T and U
and the HEDS-9100 Options B
and J are high resolution two
channel rotary incremental
encoder modules. These options
are an extension of our popular
HEDS-9000 and HEDS-9100
series. When used with a code-
wheel, these modules detect
relative rotary position. The
HEDS-9200 Option 300 and 360
are high resolution linear encoder
modules. When used with a
codestrip, these modules detect
relative linear position.
These modules consist of a lensed
Light Emitting Diode (LED)
source and detector IC enclosed
in a small C shaped plastic
package. Due to a highly
collimated light source and
unique photodetector array, these
modules provide a highly reliable
quadrature output.
The HEDS-9000 and HEDS-9100
are designed for use with
codewheels which have an optical
radius of 23.36 mm and 11 mm
respectively. The HEDS-9200 is
designed for use with a linear
codestrip.
These components produce a two
channel quadrature output which
can be accessed through five
0.025 inch square pins located on
0.1 inch centers.
The resolution of the HEDS-9000
Options T and U are 2000 and
2048 counts per revolution
respectively. The HEDS-9100
Options B and J are 1000 and
1024 counts per revolution
respectively. The HEDS-9200
Option 300 and 360 linear
encoder modules have resolutions
of 300 and 360 lines per inch.
Consult local Agilent sales
representatives for other
resolutions.
Note: Agilent Technologies
encoders are not recommended
for use in safety critical
applications. Eg. ABS braking
systems, power steering, life
support systems and critical care
medical equipment. Please
contact sales representative if
more clarification is needed.
ESD WARNING: NORMAL HANDLING PRECAUTIONS SHOULD BE TAKEN TO AVOID STATIC
DISCHARGE.

1 Page





HEDS-9000 pdf, ピン配列
3
Package Dimensions
0.63 (0.025)
SQR. TYP.
OPTION CODE
5.1 (0.20)
1.02 ± 0.10
(0.040 ± 0.004)
ALIGNING RECESS
2.44/2.41 DIA.
(0.096/0.095) 1.85 (0.073)
2.16 (0.085)
DEEP
8.64 (0.340)
REF.
26.67 (1.05)
15.2
(0.60)
CL
17.27
(0.680)
20.96
(0.825)
SIDE A
8.6 (0.34)
2.54 (0.100) TYP.
1.0 (0.04)
1.52 (0.060)
1.8
(0.07)
DATE CODE
3.73 ± 0.05
(0.147 ± 0.002)
20.8
(0.82)
11.7
(0.46)
2.67 (0.105) DIA.
MOUNTING THRU
HOLE 2 PLACES
2.44/2.41 X 2.79
(0.096/0.095 X 0.110)
2.16 (0.085) DEEP
1.78 ± 0.10
(0.070 ± 0.004)
2.92 ± 0.10
(0.115 ± 0.004)
OPTICAL CENTER
10.16
(0.400)
2.21
(0.087) 2.54
(0.100)
2.9
(0.11)
6.9 (0.27)
OPTICAL
CENTER LINE
5.46 ± 0.10
(0.215 ± 0.004)
4.75 ± 0.10
(0.187 ± 0.004)
ALIGNING RECESS
2.44/2.41 X 2.79
(0.096/0.095 X 0.110)
2.16 (0.085) DEEP
OPTICAL
CENTER
TYPICAL DIMENSIONS IN
MILLIMETERS AND (INCHES)
SIDE B
11.9
(0.47)
8.81
45°
5.8 (0.347)
(0.23)
ALIGNING RECESS
2.44/2.41 DIA.
(0.096/0.095)
2.16 (0.085) DEEP
4.11 (0.162)
6.35 (0.250) REF.
Absolute Maximum Ratings
Storage Temperature, TS ..................................................................... - 40°C to 100°C
Operating Temperature, TA ................................................................ - 40°C to 100°C
Supply Voltage, VCC ...................................................................................... - 0.5 V to 7 V
Output Voltage, VO ........................................................................................ - 0.5 V to VCC
Output Current per Channel, Iout ................................................. -1.0 mA to 5 mA
Recommended Operating Conditions
Parameter
Temperature
Supply Voltage
Load Capacitance
Count Frequency
Shaft Axial Play
Symbol
TA
VCC
CL
f
Min.
-40
4.5
Typ.
5.0
Max.
100
5.5
100
100
± 0.125
± 0.005
Units
°C
Volts
pF
kHz
mm
in.
Notes
Ripple < 100 mVp-p
3.3 kpull-up resistor
Velocity (rpm) x N/60
Note: The module performance is guaranteed to 100 kHz but can operate at higher frequencies. For frequencies above 100 kHz it is
recommended that the load capacitance not exceed 25 pF and the pull up resistance not exceed 3.3 k. For typical module performance
above 100 kHz please see derating curves.


3Pages


HEDS-9000 電子部品, 半導体
6
Gap Setting for Rotary
and Linear Modules
Gap is the distance between the
image side of the codewheel and
the detector surface of the mod-
ule. This gap dimension must
always be met and codewheel
warp and shaft end play must stay
within this range. This dimension
is shown in Figure 1.
Mounting Considerations
for Rotary Modules
Figure 2 shows a mounting
tolerance requirement for proper
operation of the high resolution
rotary encoder modules. The
Aligning Recess Centers must be
located within a tolerance circle
of 0.13 mm (0.005 in.) radius
from the nominal locations. This
tolerance must be maintained
whether the module is mounted
with side A as the mounting plane
using aligning pins (see Figure 3),
or mounted with Side B as the
mounting plane using an
alignment tool.
SIDE B
( )+0.51
+0.020
6.63 -0.25 0.261 -0.010
NOTE 1
SIDE A
IMAGE SIDE OF CODEWHEEL/CODESTRIP
( )+0.25
+0.010
3.56 -0.51 0.140 -0.020
NOTE 1
CODEWHEEL/CODESTRIP
NOTES: 1. THESE DIMENSIONS INCLUDE CODEWHEEL/CODESTRIP WARP AND SHAFT END PLAY.
2. DIMENSIONS IN MILLIMETERS AND (INCHES).
Figure 1. Module Gap Setting.
Mounting with Aligning
Pins
The high resolution rotary
encoder modules can be mounted
using aligning pins on the motor
base. (Agilent does not provide
aligning pins.) For this configu-
ration, Side A must be used as the
mounting plane. The Aligning
Recess Centers must be located
within the 0.13 mm (0.005 in.) R
Tolerance Circle as explained
above. Figure 3 shows the
necessary dimensions.
Figure 2. Rotary Module Mounting Tolerance.
Mounting with
Alignment Tools
Agilent offers alignment tools for
mounting Agilent encoder
modules in conjunction with
Agilent codewheels, using side B
as the mounting plane. Please
refer to the Agilent codewheel
data sheet for more information.
2 PLACES
NOTE 1
NOTE 1: RECOMMENDED MOUNTING SCREW TORQUE IS 4 KG-CM (3.5 IN-LBS).
Figure 3. Mounting Plane Side A.

6 Page



ページ 合計 : 11 ページ
 
PDF
ダウンロード
[ HEDS-9000 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HEDS-9000

2 CHANNEL ENCODER MODULE

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HEDS-9000

Optical Encoder Modules Reliability Data

AVAGO TECHNOLOGIES
AVAGO TECHNOLOGIES
HEDS-9000

(HEDS-9x00) Two Channel High Resolution Optical Incremental Encoder Modules

Agilent
Agilent
HEDS-9000

Two Channel Optical Incremental Encoder Modules

Avago
Avago


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap