DataSheet.jp

U632H64 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 U632H64
部品説明 PowerStore 8K x 8 nvSRAM
メーカ Simtek
ロゴ Simtek ロゴ 



Total 15 pages
		

No Preview Available !

U632H64 Datasheet, U632H64 PDF,ピン配置, 機能
www.DataSheet4U.com
Not Recommended For New Designs
U632H64
PowerStore 8K x 8 nvSRAM
Features
‡ High-performance CMOS non-
volatile static RAM 8192 x 8 bits
‡ 25 ns Access Time
‡ 12 ns Output Enable Access
Time
‡ ICC = 15 mA at 200 ns Cycle
Time
‡ Automatic STORE to EEPROM
on Power Down using external
capacitor
‡ Hardware or Software initiated
STORE
(STORE Cycle Time < 10 ms)
‡ Automatic STORE Timing
‡ 105 STORE cycles to EEPROM
‡ 10 years data retention in
EEPROM
‡ Automatic RECALL on Power Up
‡ Software RECALL Initiation
(RECALL Cycle Time < 20 μs)
‡ Unlimited RECALL cycles from
EEPROM
‡ Single 5 V ± 10 % Operation
‡ Operating temperature ranges:
0 to 70 °C
-40 to 85 °C
‡ QS 9000 Quality Standard
‡ ESD characterization according
MIL STD 883C M3015.7-HB
(classification see IC Code
Numbers)
‡ RoHS compliance and Pb- free
Package: SOP28 (330 mil)
Description
The U632H64 has two separate
modes of operation: SRAM mode
and nonvolatile mode. In SRAM
mode, the memory operates as an
ordinary static RAM. In nonvolatile
operation, data is transferred in
parallel from SRAM to EEPROM or
from EEPROM to SRAM. In this
mode SRAM functions are disab-
led.
The U632H64 is a fast static RAM
(25 ns), with a nonvolatile electri-
cally erasable PROM (EEPROM)
element incorporated in each static
memory cell. The SRAM can be
read and written an unlimited num-
ber of times, while independent
nonvolatile data resides in
EEPROM. Data transfers from the
SRAM to the EEPROM (the
STORE operation) take place auto-
matically upon power down using
charge stored in an external 100
μF capacitor. Transfers from the
EEPROM to the SRAM (the
RECALL operation) take place
automatically on power up. The
U632H64 combines the high per-
formance and ease of use of a fast
SRAM with nonvolatile data inte-
grity.
STORE cycles also may be initia-
ted under user control via a soft-
ware sequence or via a single pin
(HSB).
Once a STORE cycle is initiated,
further input or output are disabled
until the cycle is completed.
Because a sequence of addresses
is used for STORE initiation, it is
important that no other read or
write accesses intervene in the
sequence or the sequence will be
aborted.
RECALL cycles may also be initia-
ted by a software sequence.
Internally, RECALL is a two step
procedure. First, the SRAM data is
cleared and second, the nonvola-
tile information is transferred into
the SRAM cells.
The RECALL operation in no way
alters the data in the EEPROM
cells. The nonvolatile data can be
recalled an unlimited number of
times.
Pin Configuration
VCAP
A12
A7
A6
A5
A4
A3
A2
A1
A0
DQ0
DQ1
DQ2
VSS
1
2
3
4
5
6
7
8 SOP
9
10
11
12
13
14
28
27
26
25
24
23
22
21
20
19
18
17
16
15
VCCX
W
HSB
A8
A9
A11
G
A10
E
DQ7
DQ6
DQ5
DQ4
DQ3
Top View
August 15, 2006
STK Control #ML0047
Pin Description
Signal Name
A0 - A12
DQ0 - DQ7
E
G
W
VCCX
VSS
VCAP
HSB
Signal Description
Address Inputs
Data In/Out
Chip Enable
Output Enable
Write Enable
Power Supply Voltage
Ground
Capacitor
Hardware Controlled Store/Busy
1 Rev 1.1

1 Page





ページ 合計 : 15 ページ
PDF
ダウンロード
[ U632H64.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
U632H64

PowerStore 8K x 8 nvSRAM

Simtek
Simtek

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap