DataSheet.jp

AZ100E131 の電気的特性と機能

AZ100E131のメーカーはArizona Microtekです、この部品の機能は「ECL/PECL 4-bit D Flip-Flop」です。


製品の詳細 ( Datasheet PDF )

部品番号 AZ100E131
部品説明 ECL/PECL 4-bit D Flip-Flop
メーカ Arizona Microtek
ロゴ Arizona Microtek ロゴ 




このページの下部にプレビューとAZ100E131ダウンロード(pdfファイル)リンクがあります。
Total 6 pages

No Preview Available !

AZ100E131 Datasheet, AZ100E131 PDF,ピン配置, 機能
www.DataSheet4U.com
ARIZONA MICROTEK, INC.
AZ10E131
AZ100E131
ECL/PECL 4-bit D Flip-Flop
FEATURES
PACKAGE AVAILABILITY
1100 MHz Min. Toggle Frequency
Differential Outputs
PACKAGE PART NUMBER MARKING NOTES
Individual and Common Clocks
Individual Resets (asynchronous)
Paired Sets (asynchronous)
Operating Range of 4.2V to 5.46V
PLCC 28
AZ10E131FN
AZM10E131
<Date Code>
1,2
PLCC 28
AZ100E131FN
AZM100E131
<Date Code>
1,2
1 Add R2 at end of part number for 13 inch (2.5K parts) Tape & Reel.
75kΩ Internal Input Pulldown Resistors 2 Date code format: “YY” for year followed by “WW” for week.
Direct Replacement for On Semiconductor
MC10E131 & MC100E131
DESCRIPTION
The AZ10/100E131 is a quad master-slave D-type flip-flop with differential outputs. Each flip-flop may be
clocked separately by holding Common Clock (CC) LOW and using the Clock Enable (C¯¯En) inputs for clocking.
Common clocking is achieved by holding the C¯¯En inputs LOW and using CC to clock all four flip-flops. In this
case, the C¯¯En inputs perform the function of controlling the common clock to each flip-flop.
Individual asynchronous resets are provided (Rn). Asynchronous set controls (Sn) are ganged together in pairs,
with the pairing chosen to reflect physical chip symmetry.
Data enters the master when both CC and C¯¯En are LOW, and transfers to the slave when either CC or C¯¯En (or
both) go HIGH.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
CE3
D3
R3
25
26
27
D2 CE2 R2 VCCO Q3
24
23 22
21
20
Q3
19
18
17
Q2
Q2
S12 28
VEE
CC
S03
1
2
3
Pinout: 28-Lead
PLCC (top view)
16 VCC
15 Q1
14 Q1
13 Q0
D0 4
12 Q0
5 6 7 8 9 10 11
CE0
R0
D1 CE1
R1
NC VCCO
* All VCC and VCCO pins are tied together on the die.
1630 S. STAPLEY DR., SUITE 127 MESA, ARIZONA 85204 USA (480) 962-5881 FAX (480) 890-2541
www.azmicrotek.com

1 Page





AZ100E131 pdf, ピン配列
AZ10E131
AZ100E131
10K PECL DC Characteristics (VEE = GND, VCC = VCCO = +5.0V)
Symbol
VOH
VOL
VIH
VIL
Characteristic
Output HIGH Voltage1,2
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
-40°C
0°C
Min Typ Max Min Typ Max Min
3920
4110 3980
4160 4020
3050
3350 3050
3370 3050
3770
4110 3830
4160 3870
3050
3500 3050
3520 3050
Input HIGH Current
CC 350
350
IIH
S 450
450
R, C¯¯E
300
300
D 150
150
IIL Input LOW Current
0.5
0.5
0.5
IEE Power Supply Current
58 70
58 70
1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
2. Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
58
Max
4190
3370
4190
3520
350
450
300
150
70
Min
4090
3050
3940
3050
0.5
85°C
Typ
58
Max
4280
3405
4280
3555
350
450
300
150
70
100K ECL DC Characteristics (VEE = -4.2V to -5.46V, VCC = VCCO = GND)
Symbol
Characteristic
-40°C
0°C
Min Typ Max Min Typ Max Min
VOH Output HIGH Voltage1 -1085 -1005 -880 -1025 -955 -880 -1025
VOL Output LOW Voltage1 -1830 -1695 -1555 -1810 -1705 -1620 -1810
VIH
Input HIGH Voltage
-1165
-880 -1165
-880 -1165
VIL
Input LOW Voltage
-1810
-1475 -1810
-1475 -1810
Input HIGH Current
CC 350
350
IIH
S 450
450
R, C¯¯E
300
300
D 150
150
IIL
Input LOW Current
0.5
0.5
0.5
IEE Power Supply Current
58 70
58 70
1. Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
-955
-1705
58
Max
-880
-1620
-880
-1475
350
450
300
150
70
Min
-1025
-1810
-1165
-1810
0.5
85°C
Typ
-955
-1705
67
Max
-880
-1620
-880
-1475
350
450
300
150
81
100K PECL DC Characteristics (VEE = GND, VCC = VCCO = +5.0V)
Symbol
VOH
VOL
VIH
VIL
Characteristic
Output HIGH Voltage1,2
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
Min
3915
3170
3835
3190
-40°C
Typ
3995
3305
Max
4120
3445
4120
3525
Min
3975
3190
3835
3190
0°C
Typ
4045
3295
Max
4120
3380
4120
3525
Min
3975
3190
3835
3190
Input HIGH Current
CC 350
350
IIH
S 450
450
R, C¯¯E
300
300
D 150
150
IIL Input LOW Current
0.5
0.5
0.5
IEE Power Supply Current
58 70
58 70
1. For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
2. Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
4045
3295
Max
4120
3380
4120
3525
350
450
300
150
58 70
Min
3975
3190
3835
3190
0.5
85°C
Typ
4045
3295
67
Max
4120
3380
4120
3525
350
450
300
150
81
Unit
mV
mV
mV
mV
μA
μA
mA
Unit
mV
mV
mV
mV
μA
μA
mA
Unit
mV
mV
mV
mV
μA
μA
mA
November 2006 * REV - 3
www.azmicrotek.com
3


3Pages


AZ100E131 電子部品, 半導体
AZ10E131
AZ100E131
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc.
makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona
Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license
rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems
intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a
situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly
or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
November 2006 * REV - 3
www.azmicrotek.com
6

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ AZ100E131 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AZ100E131

ECL/PECL 4-bit D Flip-Flop

Arizona Microtek
Arizona Microtek


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap