|
|
PDF GP1S74PJ000F Data sheet ( Hoja de datos )
| Número de pieza | GP1S74PJ000F | |
| Descripción | Snap-in fi xing Transmissive Photointerrupter | |
| Fabricantes | Sharp Electrionic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GP1S74PJ000F (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
GP1S74PJ000F
GP1S74PJ000F
Gap : 5mm Slit : 0.5mm
Phototransistor Output,
Snap-in fixing
Transmissive Photointerrupter with
Connector
■ Description
GP1S74PJ000F is a standard, phototransistor output,
transmissive photointerrupter with opposing emitter and
detector in a case, providing non-contact sensing. For
this family of devices, the emitter and detector are insert-
ed in a case, and a 3-pin connector is included to allow
remote-mount or off-board designs.
■ Features
1. Transmissive with phototransistor output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP K.K.
(PN : 292133-3)
4. Lead free and RoHS directive compliant
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : PPC, FAX, Printer
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A04401EN
1 Date Oct. 3. 2005
© SHARP Corporation
1 page  
Fig.1 Forward Current vs. Ambient
Temperature
60
50
40
30
20
10
0
−25 0 25 50 75 85 100
Ambient temperature Ta (˚C)
Fig.3 Peak Forward Current vs.
Duty Ratio
Pulse width≤100μs
Ta=25˚C
1 000
100
10
10−2
10−1
Duty ratio
1
Fig.5 Collector Current vs.
Forward Current
10
8
VCE=5V
Ta=25˚C
6
4
2
0
0 10 20 30 40 50
Forward current IF (mA)
GP1S74PJ000F
Fig.2 Collector Power Dissipation vs.
Ambient Temperature
120
100
80
75
60
40
20
15
0
−25
0 25 50 75 85 100
Ambient temperature Ta (˚C)
Fig.4 Forward Current vs.
Forward Voltage
1 000
100
Ta=75˚C
50˚C
10
25˚C
0˚C
−25˚C
1
0 0.5 1 1.5 2 2.5 3 3.5
Foward voltage VF (V)
Fig.6 Collector Current vs.
Collector-emitter Voltage
10 Ta=25˚C
8 IF=50mA
40mA
6
30mA
4
20mA
2 10mA
0
0 1 2 3 4 5 6 7 8 9 10
Collector-emitter VCE (V)
Sheet No.: D3-A04401EN
5
5 Page 
■ Package specification
● Case package
Package materials
Anti-static plastic bag : Polyethtylene
Moltopren : Urethane
Partition : Corrugated fiberboard
Packing case : Corrugated fiberboard
GP1S74PJ000F
Package method
100 pcs of products shall be packaged in a plastic bag, Ends shall be sealed by stapler. The bottom ot the
packing case is covered with moltopren, and the partition is set in the packing case. Each partition should
have 1 plastic bag.
The 10 plastic bags containing a product are put in the packing case.
Moltopren should be located after all product are settled (1 packing conteains 1 000 pcs).
Packing composition
Partition
Anti-static
plastic bag
Moltopren
Packing case
Sheet No.: D3-A04401EN
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet GP1S74PJ000F.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GP1S74PJ000F | Snap-in fi xing Transmissive Photointerrupter | Sharp Electrionic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |