|
|
GM5115-HのメーカーはETCです、この部品の機能は「(GM5115 / GM5125) ONPANEL LCD PANEL CONTROLLER」です。 |
部品番号 | GM5115-H |
| |
部品説明 | (GM5115 / GM5125) ONPANEL LCD PANEL CONTROLLER | ||
メーカ | ETC | ||
ロゴ | |||
このページの下部にプレビューとGM5115-Hダウンロード(pdfファイル)リンクがあります。 Total 30 pages
www.DataSheet4U.com
Genesis Microchip Publication
PRELIMINARY DATA SHEET
gm5115/gm5115-H
gm5125/gm5125-H
OnPanel LCD Panel Controller
*** Genesis Microchip Confidential ***
NOTE: Sections in this data sheet that mention HDCP apply only to the HDCP-enabled chip
versions (gm5115-H and gm5125-H). All other sections apply to all chip versions (gm5115,
gm5115-H, gm5125, and gm5125-H).
Publication number: C5115-DAT-01H
Publication date: June 2002
Genesis Microchip Inc.
2150 Gold Street, Alviso, P.O. Box 2150, CA USA 95002 Tel: (408) 262-6599 Fax: (408) 262-6365
165 Commerce Valley Dr. West, Thornhill, ON Canada L3T 7V8 Tel: (905) 889-5400 Fax: (905) 889-5422
1096, 12thA Main, Hal II Stage, Indira Nagar, Bangalore-560 008, India, Tel: (91)-80-526-3878, Fax: (91)-80-529-6245
4F, No. 24, Ln 123, Sec 6, Min-Chuan E. Rd., Taipei, Taiwan, ROC Tel: 886-2-2791-0118 Fax: 886-2-2791-0196
143-37 Hyundai Tower, #902, Samsung-dong, Kangnam-gu, Seoul, Korea 135-090 Tel 82-2-553-5693 Fax 82-2-552-4942
Rm2614-2618 Shenzhen Office Tower, 6007 Shennan Blvd, 518040, Shenzhen, Guandong, P.R.C., Tel (0755)386-0101, Fax (0755)386-7874
2-9-5 Higashigotanda, Shinagawa-ku, Tokyo, 141-0022, Japan, Tel 81-3-5798-2758, Fax 81-3-5798-2759
www.genesis-microchip.com / [email protected]
1 Page *** Genesis Microchip Confidential ***
gm5115/25 Preliminary Data Sheet
Revision History
Document
Description
Date
C5115-DAT-01A • Initial release.
March 2001
C5115-DAT-01B • In Table 18 corrected description of OSC_SEL (on pin ROM_ADDR13). It should be set to 1 to June 2001
indicate usage of a single-ended clock oscillator.
• Corrected image and orientation of logo in pin out diagram Figure 2.
• Added section 4.11.3.
C5115-DAT-01C • Replaced all occurrences of CVDD with CVDD_2.5, including pin numbers 26, 88, 134 and 203 July 2001
to make them consistent with the names of other 2.5V voltage supply signals.
C5115-DAT-01D • Pin number 205 name changed from GPIO16/HFS to GPIO16/HFSn and all occurrences of
HFS replaced with HFSn to reflect the fact that this signal is active low.
July 2001
• Added description of 2-wire serial protocol in section 4.17.2 and Table 24.
• Removed “Read with Increment” operation description.
• Corrected mechanical specification in Figure 32.
• Changes to Table 21 – DC Characteristics:
- Maximum voltage for 5V-tolerance inputs is 5.5V.
- Added maximum current requirements.
• Added description of OCM Standalone configuration Figure 26.
• Added Figure 22 – Panel Power Sequencing.
C5115-DAT-01E • Added description of gm5125 (SXGA device).
August 2001
• Pin names changed to reflect alternate hard-wired functions:
- pin 50 from GPIO11 to GPIO11/ROM_WEn,
- pin 51 from GPIO12 to GPIO12/NVRAM_SDA,
- pin 52 from GPIO13 to GPIO13/NVRAM_SCL,
- pin 6 from DDC_SCL to GPIO14/DDC_SCL,
- pin 7 from DDC_SDA to GPIO15/DDC_SDA,
- pin 46 from GPIO6 to GPIO6/TCON_SHC,
- pin 47 from GPIO7 to GPIO7/TCON_TDIV.
• Removed description of 6-wire host interface, since this is not recommended operation. Pin 1
name changed from GPIO17/HDATA0 to GPIO17, and similarly for pins 206, 207 and 208.
• Corrected maximum ADC sampling frequency in Table 15 and maximum ADC_CLK frequency
in Table 22 to 162.5MHz.
• Added section 4.5 Test Pattern Generator.
• Added description of TCON_SHC and TCON_TDIV in section 4.13.1.
• Clarifications to section 4.1 describing clock generation, section 4.7.2 describing sRGB support,
and section 4.15.3 describing GPIOs.
• Removed mention of row attributes in Figure 25.
gm5115/25 OSD controller does not have row attributes.
• Corrected Table 21, Note 3. Pins VDD1_ADC_2.5, VDD2_ADC_2.5, VDD_RX0_2.5,
VDD_RX1_2.5 and VDD_RX2_2.5 are digital 2.5V supplies, not analog.
• Changed signal names SCL and SDA to HCLK and HFSn, respectively in Figure 29, Figure 30,
and Figure 31.
C5115-DAT-01F • Added note on Front Cover regarding HDCP enabled versions.
• Added section 4.12 - Energy Spectrum Management (ESM).
• Added clarification in section 4.13.1 indicating that single bus configurations are supported in
XGA column drivers only.
October 2001
• In section 4.16, clarified that ROM_ADDR[15:0] have internal 60KΩ pull-down resistor.
• Changes to Table 20 – Absolute Maximum Ratings:
– Renamed parameters θJA_XGA, θJA_SXGA, θJC_XGA and θJC_SXGA to θJA_5115, θJA_5125, θJC_5115 and
θJC_5125 and revised their values.
– Added note (4) regarding the maximum case temperature.
• Changes to Table 21 – DC Characteristics:
– Renamed parameters P5115 and P5125 and revised their values.
– Revised the values of PLP and ILP.
– Renamed parameters I5115, I5115_2.5_VDD, etc.
– Added note (6).
• Removed the clock speed column from section 6 – Ordering Information and added the ordering
information for gm5115-H and gm5125-H.
• Replaced occurrences of TMDS with DVI.
• Changed TCON_RCLK to TCON_ROWCLK in Figure 2 and in Table 7.
• Changed RCLK to ROWCLK in 4.13.2 and in Figure 24.
June 2002
iii C5115-DAT-01H
3Pages *** Genesis Microchip Confidential ***
gm5115/25 Preliminary Data Sheet
Table Of Contents
1. Overview ............................................................................................................................................ 1
1.1 gm5115/25 System Design Example ........................................................................................... 1
1.2 gm5115/25 Features..................................................................................................................... 2
2. gm5115/25 Pinout .............................................................................................................................. 3
3. gm5115/25 Pin List ............................................................................................................................ 4
4. Functional Description ..................................................................................................................... 10
4.1 Clock Generation ....................................................................................................................... 10
4.1.1 Using the Internal Oscillator with External Crystal............................................................ 11
4.1.2 Using an External Clock Oscillator .................................................................................... 13
4.1.3 Clock Synthesis................................................................................................................... 14
4.2 Hardware Reset .......................................................................................................................... 16
4.3 Analog to Digital Converter (ADC)........................................................................................... 16
4.3.1 ADC Pin Connection .......................................................................................................... 17
4.3.2 ADC Characteristics ........................................................................................................... 17
4.3.3 Clock Recovery Circuit ...................................................................................................... 18
4.3.4 Sampling Phase Adjustment ............................................................................................... 19
4.3.5 ADC Capture Window........................................................................................................ 19
4.4 Ultra-Reliable Digital Visual Receiver (DVI Rx)...................................................................... 20
4.4.1 DVI Receiver Characteristics ............................................................................................. 20
4.4.2 DVI Capture Window ......................................................................................................... 21
4.4.3 High-Bandwidth Digital Content Protection (HDCP) ........................................................ 21
4.5 Test Pattern Generator (TPG) .................................................................................................... 21
4.6 Input Format Measurement (IFM) ............................................................................................. 22
4.6.1 HSYNC / VSYNC Delay.................................................................................................... 22
4.6.2 Horizontal and Vertical Measurement ................................................................................ 23
4.6.3 Format Change Detection ................................................................................................... 23
4.6.4 Watchdog ............................................................................................................................ 24
4.6.5 Internal Odd/Even Field Detection ..................................................................................... 24
4.6.6 Input Pixel Measurement .................................................................................................... 24
4.6.7 Image Phase Measurement ................................................................................................. 24
4.6.8 Image Boundary Detection ................................................................................................. 25
4.6.9 Image Auto Balance............................................................................................................ 25
4.7 RealColorTM Digital Color Controls .......................................................................................... 25
4.7.1 RealColor™ Flesh tone Adjustment ................................................................................... 25
4.7.2 Color Standardization and sRGB Support .......................................................................... 26
4.8 High-Quality Scaling ................................................................................................................. 26
4.8.1 Variable Zoom Scaling ....................................................................................................... 26
June 2002
vi C5115-DAT-01H
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ GM5115-H データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
GM5115-H | (GM5115 / GM5125) ONPANEL LCD PANEL CONTROLLER | ETC |