|
|
PDF USB1T1104 Data sheet ( Hoja de datos )
| Número de pieza | USB1T1104 | |
| Descripción | Universal Serial Bus Peripheral Transceiver | |
| Fabricantes | Fairchild Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de USB1T1104 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
August 2004
Revised August 2005
USB1T1104
Universal Serial Bus Peripheral Transceiver
with Voltage Regulator
www.DataSheet4U.com
General Description
The USB1T1104 is an Universal Serial Bus Specification Rev
2.0 compliant transceiver. The device provides an USB inter-
face for Full-Speed (12Mbit/s) USB applications. The
USB1T1104 provides excellent flexibility, allowing differential
and single ended inputs while an integrated voltage regulator
sets the I/O level to 1.65V to 3.6V. Utilizing an integrated 5.0V to
3.3V voltage regulator, the part can be powered directly from
the USB host (VBUS) to minimize the power consumed from the
local sources while used in devices with low supply voltages.
The USB1T1104 provides 15kV ESD protection on the USB bus
pins (D/D). This eliminates the need for any external ESD
devices while providing excellent protection to larger and more
expensive ASICs and USB controllers.
Features
O Complies with Universal Serial Bus Specification 2.0
O Integrated 5V to 3.3V voltage regulator for powering VBus
O Utilizes digital inputs and outputs to transmit and receive USB
cable data
O Supports full speed 12Mbits/s speed data rates
O Ideal for portable electronic devices
O 15kV contact HBM ESD protection on bus pins
O 3.3mm leadless package
O Industry standard HBCC footprint is lead-free
Applications
O Cell phone
O Digital camera
O MP3
Ordering Code:
Order
Number
USB1T1104MHX
Package
Number
MLP16HB
Package Description
Pb-Free 16-Terminal Molded Leadless Package (MHBCC), JEDEC MO-217, 3mm Square
Pb-Free package per JEDEC J-STD-020B.
Logic Diagram
© 2005 Fairchild Semiconductor Corporation
DS500893
www.fairchildsemi.com
1 page  
Absolute Maximum Ratings(Note 6)
Recommended Operating Conditions
Supply Voltage (VCC)(5V)
0.5V to 6.0V
I/O Supply Voltage (VCCIO)
0.5V to 4.6V
Latch-up Current (ILU)
VI = 1.8V to 5.4V
150 mA
DC Input Current (IIK)
VI 0
18 mA
DC Input Voltage (VI)
(Note 7)
0.5V to VCCIO 0.5V
DC Output Diode Current (IOK)
VO ! VCC or VO 0
r18 mA
DC Output Voltage (VO)
(Note 7)
0.5V to VCCIO 0.5V
Output Source or Sink Current (IO)
VO = 0 to VCC
Current for D, D Pins
r12 mA
Current for RCV, Vm/Vp
DC VCC or GND Current
(ICC, IGND)
ESD Immunity Voltage (VESD);
Contact HBM
r12 mA
r100 mA
Pins D, D, and GND
15kV
All Other Pins
2.5kV
Storage Temperature (TSTO)
Power Dissipation (PTOT)
ICC (5V)
ICCIO
40qC to 125qC
48 mW
9 mW
DC Supply Voltage VCC (5V)
4.0V to 5.5V
I/O DC Voltage VCCIO
1.65V to 3.6V
DC Input Voltage Range (VI) 0V to VCCIO 0.5V
DC Input Range for AI/O (VIA/O)
0V to 3.6V
Pins D and D
0V to 3.6V
Operating Ambient Temperature
(TAMB)
40qC to 85qC
Note 6: The Absolute Maximum Ratings are those values beyond which the safety of
the device cannot be guaranteed. The device should not be operated at these limits.
The parametric values defined in the Electrical Characteristic tables are not guaran-
teed at the absolute maximum rating. The “Recommended Operating Conditions”
table will define the conditions for actual device operation.
Note 7: IO Absolute Maximum Rating must be observed.
DC Electrical Characteristics (Supply Pins)
Over recommended range of supply voltage and operating free air temperature (unless otherwise noted).
VCC (5V) = 4.0V to 5.5V or VREG (3.3V) = 3.0V to 3.6V, VCCIO = 1.65V to 3.6V
Symbol
VREG (3.3V)
ICC
ICCIO
ICC (IDLE)
ICCIO (STATIC)
ICC(SUSPND)
ICCIO(SHARING)
Parameter
Regulated Supply Output
Operating Supply Current (VCC5.0)
I/O Operating Supply Current
Supply Current during
FS IDLE and SE0 (VCC5.0)
I/O Static Supply Current
Suspend Supply Current
USB1T1104
I/O Sharing Mode Supply Current
Conditions
Internal Regulator Option;
ILOAD d 300 PA
Transmitting and Receiving at
12 Mbits/s; CLOAD = 50 pF (D, D)
Transmitting and Receiving at
12 Mbits/s
IDLE: VD t 2.7V, VD d 0.3V;
SE0: VD d 0.3V, VD d 0.3V
IDLE, SUSPND or SE0
SUSPND = HIGH
OE = HIGH
Vm = Vp = OPEN
VCC (5V) Not Connected
Limits
40qC to 85qC
Min Typ
3.0 3.3
(Note 8)(Note 9)
4.0
(Note 10)
1.0
(Note 10)
Max
3.6
8.0
2.0
500
(Note 11)
20.0
25.0
(Note 11)
20.0
Units
V
mA
mA
PA
PA
PA
PA
5 www.fairchildsemi.com
5 Page 
Tape and Reel Specification
Tape Format for MHBCC
Package
Designator
Tape
Section
MHX
Leader (Start End)
Carrier
Trailer (Hub End)
TAPE DIMENSIONS inches (millimeters)
Number
Cavities
125 (typ)
2500/3000
75 (typ)
Cavity
Status
Empty
Filled
Empty
Cover Tape
Status
Sealed
Sealed
Sealed
REEL DIMENSIONS inches (millimeters)
Tape Size
12 mm
A
13.0
330
B
0.059
(1.50)
C
0.512
(13.00)
D
0.795
(20.20)
N
7.008
(178)
W1
0.488
(12.4)
W2
0.724
(18.4)
11 www.fairchildsemi.com
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet USB1T1104.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| USB1T1102 | Universal Serial Bus Peripheral Transceiver with Voltage Regulator | Fairchild Semiconductor |
| USB1T1103 | Universal Serial Bus Peripheral Transceiver | Fairchild Semiconductor |
| USB1T1104 | Universal Serial Bus Peripheral Transceiver | Fairchild Semiconductor |
| USB1T1105A | Universal Serial Bus Peripheral Transceiver | Fairchild Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |