DataSheet.jp

515-1094 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 515-1094
部品説明 Rectangular Optical Light Pipe
メーカ Dialight Corporation
ロゴ Dialight Corporation ロゴ 



Total 1 pages
		

No Preview Available !

515-1094 Datasheet, 515-1094 PDF,ピン配置, 機能
3mm Round
® Optopipe®
Optical Light Pipe, Bi-Level
515-1094
www.DataSheet4U.com
3.05
[.120]
4.57
[.18]
DIFFUSED
FRONT
SURAFCES;
2 PLCS
5.08
[.200]
(REF)
DIRECTION
OF LIGHT
2.77
[.109]
17.78
[.70]
(REF)
Ø 3.05± .05
[.120± .002]
TYP; 2 PLCS
9.14
[.36]
2.79
[.11]
2.29± .18
[.090± .007]
2.54
[.100]
ALIGNMENT
ONLYPIN
5.08± .07
[.200± .003]
4.39
[.173]
TYP
0.508
[.020]TYP
2.69
[.106]TYP
.99
[.039]
TYP
6.10
[.024]
3.81
[.150]
TYP
1.63
[.063]
TYP
4.27
[.168]
2.54±.05
[.100±.002]
DIRECTION
OF LIGHT
Ø 1.52±.05
[.060± .002]
TYP; 2 PLCS
BICOLORAPDS
(P/N: 597-77X1-507)
SOLDERAPD/HOLES LYAOUT
4.19
[.165]
3.35
[.132]
SINGLE COLORADPS
(P/N: 597-3XX1-507)
14.22
[.56]
7.62± .18
[.300 ± .007]
1.65
[.065]
1.63
[.064]
DIA (NOM)
MNTG PNI
5.08± .18
[.200± .007]
2.54± .18
[.100± .007]
NOTE: designed for
post-reflow
PC board insertion.
Dimensions in mm [inches]
Recommended
MicroLED SMT LEDs
for use with 515-1094
PART NO.
597-3021-5xx
597-3111-5xx
597-3211-5xx
597-3301-5xx
597-3401-5xx
597-7701-5xx
597-7721-5xx
COLOR
Red
AlGaAs Red
Orange
Green
Yellow
Red/Green
Yellow/Green
PAGE #
1-30
1-30
1-30
1-30
1-30
1-31
1-31
Features
• Can be mounted in arrays spaced .200 apart (min.)
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Allows bi-level SMT indicators
• Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electri-
cal and optical data on the recommended LEDs,
refer to LED data sheets.
Operating/Storage Temperature
–30°C to +100°C
Dialight Optopipe® Light Pipe Description
This Optopipe® is a standard design intended as a SMT compatible replacement for our 553 Series Circuit Board
Indicators. The light outputs are spaced vertically .100" from the PCB to the first element, and then 0.200" between the top
and bottom elements. We recommend a minimum of 0.200" between light pipes as a normal mounting pitch. This Optopipe®
is held in place by 2 press-fit pins along the bottom of the device. The light pipe is not attached to the panel at any point
but can protrude through holes in the panel. The gently arcing emitting end sticks through the plastic or metal panel. The
light source is Dialight's 597 Series Type 1208 LED. The light pipe material is water clear transmissive polycarbonate rated
UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe® solutions for your applications.
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com

1 Page





ページ 合計 : 1 ページ
PDF
ダウンロード
[ 515-1094.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
515-1094

Rectangular Optical Light Pipe

Dialight Corporation
Dialight Corporation

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap