|
|
Número de pieza | LTC1000-SF | |
Descripción | Current Transducer | |
Fabricantes | LEM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LTC1000-SF (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Current Transducer LTC 1000-SF
For the electronic measurement of currents : DC, AC, pulsed...,
with a galvanic isolation between the primary circuit (high power)
and the secondary circuit (electronic circuit).
IPN = 1000 A
Electrical data
IPN
IP
ÎP
RM
ISN
KN
VC
IC
Vd
www.DataSheet4U.com
Primary nominal r.m.s. current
Primary current, measuring range @ 24 V
Max overload not measurable
Measuring resistance
with ± 15 V
with ± 24 V
@ ± 1000 A max
@ ± 1200 A max
@ ± 1000 A max
@ ± 2000 A max
Secondary nominal r.m.s. current
Conversion ratio
Supply voltage (± 5 %)
Current consumption
R.m.s. voltage for AC isolation test, 50 Hz, 1 mn
Ve R.m.s. voltage for partial discharge extinction
Accuracy - Dynamic performance data
X G Overall accuracy @ IPN , TA = 25°C
ε L Linearity
@ IPN , TA = - 40°C .. + 85°C
IO
IOT
tr
di/dt
f
Offset current @ IP = 0, TA = 25°C
Thermal drift of IO
Response time 5) @ 90 % of IPN
di/dt accurately followed
Frequency bandwidth (- 1 dB)
- 40°C .. + 85°C
General data
TA Ambient operating temperature
TS Ambient storage temperature
R Secondary coil resistance @ T = 85°C
SA
m Mass
Standards
1000
A
0 .. ± 2400 1)
A
10 / 10 kA/ms
R RM min
M max
0 15 Ω
0 7Ω
0 50 Ω
0 7Ω
200 m A
1 : 5000
± 15 .. 24
V
< 30(@±24V)+IS m A
13.4 2)
kV
1.5 3)
kV
> 2.8 4)
kV
< ± 0.4
<±1
< 0.1
Max
± 0.5
±1
<1
> 100
DC .. 100
%
%
%
mA
mA
µs
A/µ s
kHz
- 40 .. + 85
°C
- 45 .. + 90
°C
44 Ω
780 g
EN 50155 (01.12.20)
Features
• Closed loop (compensated) current
transducer using the Hall effect
• Insulated plastic case recognized
according to UL 94-V0
• Transducer delivered with feet
• Railway equipment.
Advantages
• Excellent accuracy
• Very good linearity
• Low temperature drift
• Optimized response time
• Wide frequency bandwidth
• No insertion losses
• High immunity to external
interference
• Current overload capability.
Applications
• AC variable speed drives and servo
motor drives
• Static converters for DC motor drives
• Battery supplied applications
• Uninterruptible Power Supplies
(UPS)
• Switched Mode Power Supplies
(SMPS)
• Power supplies for welding
applications.
Notes : 1) With a di/dt of > 5 A/µs
2) Between primary and secondary + shield
3) Between secondary and shield
4) Test carried out with a busbar ∅ 40 mm centred in the through-hole
5) With a di/dt of 100 A/µs.
030528/0
LEM Components
w w w.lem.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet LTC1000-SF.PDF ] |
Número de pieza | Descripción | Fabricantes |
LTC1000-S | Current Transducer | LEM |
LTC1000-SF | Current Transducer | LEM |
LTC1000-SFC | Current Transducer | LEM |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |