|
|
PDF ISL6594B Data sheet ( Hoja de datos )
| Número de pieza | ISL6594B | |
| Descripción | (ISL6594A/B) Advanced Synchronous Rectified Buck MOSFET Drivers | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISL6594B (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
®
Data Sheet
Advanced Synchronous Rectified Buck
MOSFET Drivers with Protection Features
The ISL6594A and ISL6594B are high frequency MOSFET
drivers specifically designed to drive upper and lower power
N-Channel MOSFETs in a synchronous rectified buck
converter topology. These drivers combined with the
ISL6592 Digital Multi-Phase Buck PWM controller and
N-Channel MOSFETs form a complete core-voltage
regulator solution for advanced microprocessors.
The ISL6594A drives the upper gate to 12V, while the lower
gate can be independently driven over a range from 5V to
12V. The ISL6594B drives both upper and lower gates over
a range of 5V to 12V. This drive-voltage provides the
flexibility necessary to optimize applications involving trade-
offs between gate charge and conduction losses.
An adaptive zero shoot-through protection is integrated to
prevent both the upper and lower MOSFETs from conducting
simultaneously and to minimize the dead time. These
products add an overvoltage protection feature operational
before VCC exceeds its turn-on threshold, at which the
PHASE node is connected to the gate of the low side
MOSFET (LGATE). The output voltage of the converter is
then limited by the threshold of the low side MOSFET, which
provides some protection to the microprocessor if the upper
MOSFET(s) is shorted during initial start-up.
These drivers also feature a three-state PWM input which,
working together with Intersil’s multi-phase PWM controllers,
prevents a negative transient on the output voltage when the
output is shut down. This feature eliminates the Schottky
diode that is used in some systems for protecting the load
from reversed output voltage events.
ISL6594A, ISL6594B
July 31, 2006
FN9157.3
Features
• Dual MOSFET Drives for Synchronous Rectified Bridge
• Adjustable Gate Voltage (5V to 12V) for Optimal Efficiency
• 36V Internal Bootstrap Schottky Diode
• Bootstrap Capacitor Overcharging Prevention
• Supports High Switching Frequency (up to 2MHz)
- 3A Sinking Current Capability
- Fast Rise/Fall Times and Low Propagation Delays
• Three-State PWM Input for Output Stage Shutdown
• Three-State PWM Input Hysteresis for Applications With
Power Sequencing Requirement
• Pre-POR Overvoltage Protection
• VCC Undervoltage Protection
• Expandable Bottom Copper Pad for Enhanced Heat
Sinking
• Dual Flat No-Lead (DFN) Package
- Near Chip-Scale Package Footprint; Improves PCB
Efficiency and Thinner in Profile
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Core Regulators for Intel® and AMD® Microprocessors
• High Current DC/DC Converters
• High Frequency and High Efficiency VRM and VRD
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Technical Brief TB417 for Power Train Design, Layout
Guidelines, and Feedback Compensation Design
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
ISL6594A, ISL6594B
Electrical Specifications
Recommended Operating Conditions, Unless Otherwise Noted. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
Three-State Upper Gate Falling Threshold
VCC = 12V
-
Shutdown Holdoff Time
UGATE Rise Time
LGATE Rise Time
UGATE Fall Time (Note 4)
LGATE Fall Time (Note 4)
UGATE Turn-On Propagation Delay (Note 4)
LGATE Turn-On Propagation Delay (Note 4)
UGATE Turn-Off Propagation Delay (Note 4)
LGATE Turn-Off Propagation Delay (Note 4)
LG/UG Three-State Propagation Delay (Note 4)
OUTPUT
tTSSHD
tRU
tRL
tFU
tFL
tPDHU
tPDHL
tPDLU
tPDLL
tPDTS
VPVCC = 12V, 3nF Load, 10% to 90%
VPVCC = 12V, 3nF Load, 10% to 90%
VPVCC = 12V, 3nF Load, 90% to 10%
VPVCC = 12V, 3nF Load, 90% to 10%
VPVCC = 12V, 3nF Load, Adaptive
VPVCC = 12V, 3nF Load, Adaptive
VPVCC = 12V, 3nF Load
VPVCC = 12V, 3nF Load
VPVCC = 12V, 3nF Load
-
-
-
-
-
-
-
-
-
-
Upper Drive Source Current (Note 4)
IU_SOURCE VPVCC = 12V, 3nF Load
Upper Drive Source Impedance
RU_SOURCE 150mA Source Current
Upper Drive Sink Current (Note 4)
IU_SINK VPVCC = 12V, 3nF Load
Upper Drive Sink Impedance
RU_SINK 150mA Sink Current
Lower Drive Source Current (Note 4)
IL_SOURCE VPVCC = 12V, 3nF Load
Lower Drive Source Impedance
RL_SOURCE 150mA Source Current
Lower Drive Sink Current (Note 4)
IL_SINK VPVCC = 12V, 3nF Load
Lower Drive Sink Impedance
RL_SINK 150mA Sink Current
NOTE:
4. Guaranteed by design. Not 100% tested in production.
-
1.4
-
0.9
-
0.85
-
0.60
TYP
1.96
245
26
18
18
12
10
10
10
10
10
1.25
2.0
2
1.65
2
1.3
3
0.94
MAX
-
-
-
-
-
-
-
-
-
-
-
UNITS
V
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
-
3.0
-
3.0
-
2.2
-
1.35
A
Ω
A
Ω
A
Ω
A
Ω
Functional Pin Description
PACKAGE PIN #
PIN
SOIC DFN SYMBOL
FUNCTION
1 1 UGATE Upper gate drive output. Connect to gate of high-side power N-Channel MOSFET.
2 2 BOOT Floating bootstrap supply pin for the upper gate drive. Connect the bootstrap capacitor between this pin and the
PHASE pin. The bootstrap capacitor provides the charge to turn on the upper MOSFET. See the Internal Bootstrap
Device section under DESCRIPTION for guidance in choosing the capacitor value.
- 3,8 N/C No Connection.
3 4 PWM The PWM signal is the control input for the driver. The PWM signal can enter three distinct states during operation, see
the three-state PWM Input section under DESCRIPTION for further details. Connect this pin to the PWM output of the
controller.
4 5 GND Bias and reference ground. All signals are referenced to this node. It is also the power ground return of the driver.
5 6 LGATE Lower gate drive output. Connect to gate of the low-side power N-Channel MOSFET.
6 7 VCC Connect this pin to a +12V bias supply. Place a high quality low ESR ceramic capacitor from this pin to GND.
7 9 PVCC This pin supplies power to both upper and lower gate drives in ISL6594B; only the lower gate drive in ISL6594A.
Its operating range is +5V to 12V. Place a high quality low ESR ceramic capacitor from this pin to GND.
8 10 PHASE Connect this pin to the SOURCE of the upper MOSFET and the DRAIN of the lower MOSFET. This pin provides
a return path for the upper gate drive.
9 11 PAD Connect this pad to the power ground plane (GND) via thermally enhanced connection.
5 FN9157.3
July 31, 2006
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet ISL6594B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISL6594A | (ISL6594A/B) Advanced Synchronous Rectified Buck MOSFET Drivers | Intersil Corporation |
| ISL6594B | (ISL6594A/B) Advanced Synchronous Rectified Buck MOSFET Drivers | Intersil Corporation |
| ISL6594D | Advanced Synchronous Rectified Buck MOSFET Drivers | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |