DataSheet.jp

ISL59534 の電気的特性と機能

ISL59534のメーカーはIntersil Corporationです、この部品の機能は「32x16 Video Crosspoint」です。


製品の詳細 ( Datasheet PDF )

部品番号 ISL59534
部品説明 32x16 Video Crosspoint
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 




このページの下部にプレビューとISL59534ダウンロード(pdfファイル)リンクがあります。

Total 22 pages

No Preview Available !

ISL59534 Datasheet, ISL59534 PDF,ピン配置, 機能
®
Data Sheet
February 7, 2007
ISL59534
FN6249.5
32x16 Video Crosspoint
The ISL59534 is a 300MHz 32x16 Video Crosspoint Switch.
Each input has an integrated DC-restore clamp and an input
buffer. Each output has a fast On-Screen Display (OSD)
switch (for inserting graphics or other video) and an output
buffer. The switch is non-blocking, so any combination of
inputs to outputs can be chosen, including one channel
driving multiple outputs. The Broadcast Mode directs one
input to all 16 outputs. The output buffers can be individually
controlled through the SPI interface, the gain can be
programmed to +1 or +2, and each output can be placed into
a high impedance mode.
The ISL59534 offers a typical -3dB signal bandwidth of
300MHz. Differential gain of 0.025% and differential gain of
0.05°, along with 0.1dB flatness out to 50MHz, make the
ISL59534 suitable for many video applications.
The switch matrix configuration and output buffer gain are
programmed through an SPI/QSPI™-compatible three-wire
serial interface. The ISL59534 interface is designed to
facilitate both fast updates and initialization. On power-up, all
outputs are high impedance to avoid output conflicts.
Thewww.DataSheet4U.com ISL59534 is available in a 356 ball BGA package and
specified over an extended -40°C to +85°C temperature range.
The single-supply ISL59534 can accommodate input signals
from 0V to 3.5V and output voltages from 0V to 3.8V. Each
input includes a clamp circuit that restores the input level to
an externally applied reference in AC-coupled applications.
The ISL59535 is a fully differential input version of this device.
Features
• 32x16 non-blocking switch with buffered inputs and
outputs
• 300MHz typical bandwidth
• 0.025%/0.05° dG/dP
• Output gain switchable +1 or +2 for each channel
• Individual outputs can be put in a high impedance state
• -90dB Isolation at 6MHz
• SPI digital interface
• Single +5V supply operation
• Pb-free plus anneal available (RoHS compliant)
Applications
• Security camera switching
• RGB routing
• HDTV routing
Ordering Information
PART NUMBER TAPE &
(Note)
REEL
PACKAGE
(Pb-Free)
PKG. DWG. #
ISL59534IKEZ
- 356 Ld BGA
V356.27x27A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Block Diagram
VREF
32 VIDEO
INPUTS
IN0 - IN31
CLAMP
VS VOVERn
OVERn
16 OVERLAY
VIDEO INPUTS
16 OVERLAY
CHANNEL
ENABLES
32x16
SWITCH
MATRIX
16 VIDEO
OUTPUTS
OUT0 – OUT15
SDI
SCLK
SLATCH
CLAMP
CLAMP
ENABLE
SPI INTERFACE AND
CONTROL REGISTERS
AV
X1, X2
OUTPUT
ENABLE
VSDO
SDO
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.

1 Page





ISL59534 pdf, ピン配列
ISL59534
Absolute Maximum Ratings (TA = +25°C)
Supply Voltage between VS and GND. . . . . . . . . . . . . . . . . . . . 6.0V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 40mA
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Maximum power supply (VS) slew rate . . . . . . . . . . . . . . . . . . 1V/μs
ESD Classification
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
DC Electrical Specifications VS = 5V, RL = 150Ω unless otherwise noted.
PARAMETER
DESCRIPTION
CONDITION
VS
VSDO
AV
GM
VIN
VOUT
IB
IREF
VOS
IOUT
PSRR
IS
Power Supply Voltage
Power Supply for SDO output pin
Establishes serial data output high level
Gain (between all primary inputs and all
overlay inputs)
Gain Matching (to average of all other
outputs)
Video Input Voltage Range
Video Output Voltage Range
Input Bias Current
AV = 1
AV = 2
AV = 1
AV = 2
AV = 1
AV = 2
Clamp function disabled (DC coupled inputs)
VREF Input Current
Output Offset Voltage
Output Current
Power Supply Rejection Ratio
Supply Current
Clamp function enabled, VIN = VREF + 0.5V
Clamp function enabled
AV = 1
AV = 2
Sourcing, RL = 10Ω to GND
Sinking, RL = 10Ω to 2.5V
AV = 2
Enabled, all outputs enabled, no load current
Enabled, all outputs disabled, no load current
Disabled
MIN
4.5
1.2
0.98
1.96
-1.5
-1.5
0
0.1
-10
0.5
-20
-100
60
24
50
385
280
1.2
TYP
1
2
-5
2
-110
8
-24
108
31
70
445
320
1.8
MAX
5.5
5.5
1.02
2.04
+1.5
+1.5
3.5
3.8
1
10
35
40
505
360
2.4
UNIT
V
V
V/V
V/V
%
%
V
V
µA
µA
µA
mV
mV
mA
mA
dB
mA
mA
mA
AC Electrical Specifications VS = 5V, RL = 150Ω unless otherwise noted.
PARAMETER
DESCRIPTION
CONDITION
MIN TYP MAX UNIT
BW -3dB
BW 0.1dB
SR
TS
Glitch
Tover
dG
dP
3dB Bandwidth
0.1dB Bandwidth
Slew Rate
Settling Time to 0.1%
Switching Glitch, Peak
Overlay Delay Time
Diff Gain
Diff Phase
VOUT = 200mVP-P, AV = 2
300 MHz
VOUT = 200mVP-P, AV = 2
VOUT = 2VP-P, AV = 2
VOUT = 2VP-P, AV = 2
50 MHz
300 520 740 V/µs
12 ns
AV = 1
From OVER rising edge to output transition
40
6
mV
ns
AV = 2, RL = 150Ω
AV = 2, RL = 150Ω
0.025
0.05
%
°
Xt Hostile Crosstalk
6MHz
-85 dB
VN Input Referred Noise Voltage
18 nV/Hz
3 FN6249.5
February 7, 2007


3Pages


ISL59534 電子部品, 半導体
Typical Performance Curves
MUX MODE
AV = 1
RL = 100Ω
INPUT_CH 0
OUTPUT_CH 0
33pF
27pF
22pF
15pF
10pF
4.7pF
0pF
ISL59534
MUX MODE
AV = 2
RL = 100Ω
INPUT_CH 0
OUTPUT_CH 0
33pF
27pF
22pF
15pF
10pF
4.7pF
0pF
FIGURE 1. FREQUENCY RESPONSE - VARIOUS CL, AV = 1,
MUX MODE
MUX MODE
AV = 1
CL = 0
INPUT_CH 0
OUTPUT_CH 0
100Ω
150Ω
500Ω
1.07kΩ
FIGURE 2. FREQUENCY RESPONSE - VARIOUS CL, AV = 2,
MUX MODE
MUX MODE
AV = 2
CL = 0
INPUT_CH 0
OUTPUT_CH 0
100Ω
150Ω
500Ω
1.07kΩ
FIGURE 3. FREQUENCY RESPONSE - VARIOUS RL, AV = 1,
MUX MODE
FIGURE 4. FREQUENCY RESPONSE - VARIOUS RL, AV = 2,
MUX MODE
OVERLAY MODE
AV = 1
RL = 100Ω
CL = 0pF
INPUT_CH 31
OUTPUT_CH 31
FIGURE 5. FREQUENCY RESPONSE - OVERLAY INPUT,
AV = 1
6
OVERLAY MODE
AV = 2
RL = 100Ω
CL = 0pF
INPUT_CH 31
OUTPUT_CH 31
FIGURE 6. FREQUENCY RESPONSE - OVERLAY INPUT,
AV = 2
FN6249.5
February 7, 2007

6 Page



ページ 合計 : 22 ページ
 
PDF
ダウンロード
[ ISL59534 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ISL59530

16 x 16 Video Crosspoint

Intersil Corporation
Intersil Corporation
ISL59531

16x16 Video Crosspoint

Intersil Corporation
Intersil Corporation
ISL59532

32x32 integrated video crosspoint switch matrix

Intersil Corporation
Intersil Corporation
ISL59533

32x32 Video Crosspoint

Intersil Corporation
Intersil Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap