DataSheet.jp

ISL59531 の電気的特性と機能

ISL59531のメーカーはIntersil Corporationです、この部品の機能は「16x16 Video Crosspoint」です。


製品の詳細 ( Datasheet PDF )

部品番号 ISL59531
部品説明 16x16 Video Crosspoint
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 




このページの下部にプレビューとISL59531ダウンロード(pdfファイル)リンクがあります。
Total 21 pages

No Preview Available !

ISL59531 Datasheet, ISL59531 PDF,ピン配置, 機能
®
PRELIMINARY
Data Sheet
16x16 Video Crosspoint with Differential
Inputs
The ISL59531 is a 16x16 integrated video crosspoint switch
matrix with differential input and On-Screen Display (OSD)
insertion. The ISL59531 is ideal for routing video signals in
security and video-on-demand systems. This device
operates from a single +5V supply. Any output of the 16
video inputs cable can be switched to any of the 16 outputs.
OSD information can be inserted into any output through an
internal, dedicated fast 2:1 mux (15ns switching times)
located before the output buffer. Also, any input can be
broadcast to all 16 outputs. Each output can be tri-stated
and its gain set to +1 or +2 through the SPI interface.
The ISL59531 offers a -3dB signal bandwidth of 320MHz.
The differential gain and differential phase of 0.025%, along
with 0.1dB flatness out to 50MHz, making the ISL59531
suitable for many video applications.
The switch matrix configuration and output buffer gain are
programmed through an SPI/QSPI™-compatible three-wire
serial interface. The ISL59531 interface is set up to facilitate
both fast updates and initialization. On power-up, all outputs
are initialized in the disabled state to avoid output conflicts
withinwww.DataSheet4U.com the user system. The ISL59531 has single-supply
signal operation. It can accommodate input common mode
voltages from 0V to 3.5V and 0V to 4V at the outputs.
The ISL59531 is available in a 356-pin BGA package and
specified over an extended -40°C to +85°C temperature
range.
The ISL59530 is a single-ended input version of this device.
For capacitor-coupled applications, the ISL59530 inputs
include a clamp circuit that restores the input level to an
externally applied reference.
March 21, 2006
ISL59531
FN6251.0
Features
• 16x16 non-blocking switch with differential inputs and
outputs
• Operates from a single +5V supply
• Output gain switchable +1 or +2
• SPI digital interface
• Tri-state output
• -90dB Isolation at 6MHz
• 0.025%/0.05° dG/dP
• Pb-free plus anneal available (RoHS compliant)
Applications
• Security camera switching
• RGB routing
• HDTV routing
Ordering Information
PART
NUMBER
TAPE & REEL PACKAGE
PKG. DWG. #
ISL59531IKZ
(See Note)
- 356-Pin BGA V356.27x27
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.

1 Page





ISL59531 pdf, ピン配列
ISL59531
Absolute Maximum Ratings (TA = 25°C)
Supply Voltage between VS and GND. . . . . . . . . . . . . . . . . . . . 5.5V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 40mA
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
DC Electrical Specifications VS = 5V
PARAMETER
DESCRIPTION
VS Supply Range
VD Digital Supply
AV Gain
GM
VIN
VOUT
IB
VOS
Gain Matching (to average of all other
outputs)
Input Voltage Range
Output Voltage Range
Input Bias Current
Output Offset Voltage
IOUT
Output Current
PSRR
IS
Power Supply Rejection Ratio
Supply Current
CONDITION
Establishes serial output high level
AV = 1, RL = 500
AV= 2, RL = 150
AV = 1
AV = 2
AV = 1
AV = 2, RL = 150
AV = 1
AV = 2
Sourcing, RL = 10to GND
Sinking, RL to 2.5V
Enabled, all outputs enable, no load current
Enable, all outputs disable, no load current
Disabled
Supply current per output channel
MIN
4.5
1.2
0.97
1.94
-1.5
0
0
-10
-25
-70
60
25
TYP
1
2
1
0.5
-5
0
0
100
35
80
312
140
0.8
7
MAX
5.5
5.5
1.03
2.06
1.5
1.0
3.5
4.0
0
25
70
375
1.1
UNIT
V
V
V/V
V/V
%
%
V
V
µA
mV
mV
mA
mA
dB
mA
mA
mA
mA
AC Electrical Specifications
PARAMETER
DESCRIPTION
BW -3dB
3dB Bandwidth
BW 0.1dB
0.1dB Bandwidth
SR Slew Rate
TS
Glitch
Settling Time to 0.1%
Switching Glitch, Peak
Tover
dG
Overlay Delay Time
Diff Gain
dP Diff Phase
Xt Hostile Crosstalk
VN Input Noise Voltage
CONDITION
VOUT = 200mVP-P, AV = 2
VOUT = 200mVP-P, AV = 2
VOUT = 2VP-P, AV = 2
VOUT = 2VP-P, AV = 2
AV = 1
Beginning of output transition
AV = 2, RL = 150
AV = 2, RL = 150
6MHz
MIN TYP MAX UNIT
320 MHz
50 MHz
360 520
V/µs
12 ns
40 mV
6 ns
0.025
%
0.05 °
-85 dB
42 nV/Hz
3 FN6251.0
March 21, 2006


3Pages


ISL59531 電子部品, 半導体
Typical Performance Curves
Vs=+5V
AV = 1
RL = 100
INPUT_CH 0
OUTPUT_CH 0
15pF
10pF
4.7pF
0pF
ISL59531
VS=+5V
AV = 2
RL = 100
INPUT_CH 0
OUTPUT_CH 0
15pF
10pF
4.7pF
0pF
FIGURE 1. FREQUENCY RESPONSE - VARIOUS CL, AV = 1,
MUX MODE
VS=+5V
AV = 1
CL = 0pF
INPUT_CH 0
OUTPUT_CH 0
150
50
500
1.03k
FIGURE 3. FREQUENCY RESPONSE - VARIOUS RL, AV = 1,
MUX MODE
FIGURE 2. FREQUENCY RESPONSE - VARIOUS CL, AV = 2,
MUX MODE
VS=+5V
AV = 2
CL = 0
INPUT_CH 0
OUTPUT_CH 0
150
50
500
1.03k
FIGURE 4. FREQUENCY RESPONSE - VARIOUS RL, AV = 2,
MUX MODE
Overlay mode
AV = 1
RL = 100
CL=0pF
INPUT_CH 15
OUTPUT_CH 31
FIGURE 5. FREQUENCY RESPONSE - OVERLAY INPUT,
AV = 1
Overlay mode
AV = 2
RL = 100
CL=0pF
INPUT_CH 15
OUTPUT_CH 15
FIGURE 6. FREQUENCY RESPONSE - OVERLAY INPUT,
AV = 2
6 FN6251.0
March 21, 2006

6 Page



ページ 合計 : 21 ページ
 
PDF
ダウンロード
[ ISL59531 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ISL59530

16 x 16 Video Crosspoint

Intersil Corporation
Intersil Corporation
ISL59531

16x16 Video Crosspoint

Intersil Corporation
Intersil Corporation
ISL59532

32x32 integrated video crosspoint switch matrix

Intersil Corporation
Intersil Corporation
ISL59533

32x32 Video Crosspoint

Intersil Corporation
Intersil Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap