DataSheet.es    


PDF ISL1532 Data sheet ( Hoja de datos )

Número de pieza ISL1532
Descripción Dual Channel Differential DSL Line Driver
Fabricantes Intersil Corporation 
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de ISL1532 (archivo pdf) en la parte inferior de esta página.


Total 2 Páginas

No Preview Available ! ISL1532 Hoja de datos, Descripción, Manual

®
Data Sheet
Dual Channel Differential DSL Line Driver
The ISL1532 is a dual channel differential amplifier designed
for driving full rate ADSL2+ signals at very low power
dissipation. The high drive capability of 450mA makes this
driver ideal for DMT designs. It contains two pairs of
wideband, high-voltage, current mode feedback amplifiers
designed on Intersil’s HS30 Bipolar SOI process for low
power consumption in DSL systems.
These drivers achieve an MTPR distortion measurement of
better than 70dB, while consuming typically 5mA per DSL
channel of total supply current. This supply current can be
set using a resistor on the IADJ pin. Two other pins (C0 and
C1) can also be used to adjust supply current to one of four
pre-set modes (full-IS, 3/4-IS, 1/2-IS, and full power-down).
The ISL1532 operates on ±5V to ±15V supplies and retains
its bandwidth and linearity over the complete supply range.
The device is supplied in a thermally-enhanced
20 Ld HTSSOP and the small footprint (4x5mm) 24 Ld QFN
packages. The ISL1532 is specified for operation over the
full -40°C to +85°C temperature range.
The ISL1532 provides larger output swing at heavy loads,
higherwww.DataSheet4U.com slew rate, and higher bandwidth while maintaining
pin-to-pin drop-in compatibility with the EL1528. The
ISL1532 integrates 50k pull-up resistors on C0 and C1 pins.
Pinout
ISL1532
(24 LD QFN)
TOP VIEW
VINA+ 1
VINB+ 2
GND 3
IADJ 4
NC 5
VINC+ 6
VIND+ 7
THERMAL
PAD
19 VINA-
18 VINB-
17 VOUTB
16 VOUTC
15 VINC-
14 VIND-
13 VOUTD
October 10, 2006
ISL1532
FN6173.1
Features
• 450mA output drive capability
• 44.4VP-P differential output drive into 100Ω
• ±5V to ±15V supply operation
• MTPR of -70dB
• Operates down to 2mA per amplifier supply current
• Current control pins
• Channel separation
- 80dB @ 500kHz
• Direct pin-to-pin replacement for EL1528
• Pb-free plus anneal available (RoHS compliant)
Applications
• Dual port ADSL2+ line drivers
• HDSL line drivers
Get Full Datasheet
ISL1532
(20 Ld HTSSOP)
TOP VIEW
C0AB 1
20 VS-
C1AB 2
19 VOUTA
VINA+ 3
18 VINA-
VINB+ 4
17 VINB-
GND 5
IADJ 6
THERMAL
PAD
16 VOUTB
15 VOUTC
VINC+ 7
14 VINC-
VIND+ 8
13 VIND-
C1CD 9
12 VOUTD
C0CD 10
11 VS+
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.

1 page





PáginasTotal 2 Páginas
PDF Descargar[ Datasheet ISL1532.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ISL1532Dual Channel Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1532ADual Channel Fixed Gain Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1533Dual Channel Differential DSL Line DriverIntersil Corporation
Intersil Corporation
ISL1534Dual Channel Fixed Gain Differential DSL Line DriverIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar