DataSheet.jp

MN101CP539 の電気的特性と機能

MN101CP539のメーカーはPanasonic Semiconductorです、この部品の機能は「MN101CP539」です。


製品の詳細 ( Datasheet PDF )

部品番号 MN101CP539
部品説明 MN101CP539
メーカ Panasonic Semiconductor
ロゴ Panasonic Semiconductor ロゴ 




このページの下部にプレビューとMN101CP539ダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

MN101CP539 Datasheet, MN101CP539 PDF,ピン配置, 機能
MN101C539
Type
ROM (×8-bit)
RAM (×8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
www.DataSheet4U.com
Serial Interface
I/O Pins
I/O
Input
MN101C539
24 K (External memory can not be expanded)
0.5 K (External memory can not be expanded)
TQFP048-P-0707B *Lead-free
High speed mode: 0.10 µs (at 4.5 V to 5.5 V, 20 MHz)
0.238 µs (at 2.7 V to 5.5 V, 8.39 MHz)
1.00 µs (at 2.0 V to 5.5 V, 4 MHz)*
Low speed mode: 61.04 µs (at 2.0 V to 5.5 V, 32.768 kHz)*
* The lower limit for operation guarantee for EPROM built-in type is 2.7 V.
RESET Watchdog External 0 External 1 External 2 External 3 Timer 2 Timer 3 Timer 6
Time Base Serial 0 (2 systems) A/D conversion finish Timer 7 (2 systems)
Timer counter 2 : 8-bit × 1
(square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1 (square-wave output, event count, generation of remote control carrier)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer
Clock source ····················· 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock
frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave/16-bit PWM output, cycle / duty continuous variable, event count, synchronous output evevt, pulse
width measurement, input capture)
Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC
oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 7 (2 lines)
Time base timer (one-minute count setting)
Clock source ····················· 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency
Interrupt source ················ 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency
Watchdog timer
Interrupt source ················ 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial 0 : synchronous type/UART (full-duplex) × 1
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 2, 3;
1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency
36 Common use Specified pull-up resistor available Input/output selectable (bit unit)
4 Common use Specified pull-up resistor available
1 MAD00004DEM

1 Page





MN101CP539 pdf, ピン配列
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ MN101CP539 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MN101CP539

MN101CP539

Panasonic Semiconductor
Panasonic Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap