|
|
PDF HCD210 Data sheet ( Hoja de datos )
| Número de pieza | HCD210 | |
| Descripción | OCXO Sine Output | |
| Fabricantes | Golledge Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HCD210 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
OCXO Sine Output
HCD210
Optional SMA/B/C/BNC/MCX
RF connector
10.00
15.00
1
9
50.00
70.00
AA
Fixing holes M3 tapped.
Penetration 5mm max.
40.00
15.90
PIN CONNECTION
1 Freq adjust (+ve)
2 Fine adjust
3 Freq adjust (-ve)
4 Isolated RF output
5 Isolated RF output
6 + Supply
7 DO NOT USE
8 - Supply
9 Case
AA
15.90
5.90 5.90
Mechanical frequency
adjustment on this face
Scale 1:2
Features
« Frequencies up to 100MHz
« Internal multiplier above 50.0MHz
« Single oven & oscillator supply
« 12V supply standard, 15V or 18V optional
« Custom options available
Specifications
Parameters
Frequency range: 5.0 ~ 100.0MHz
Product
HCD210
Ageing per day (at despatch):
< ±1x10-8
< ±5x10-9
˿
Frequency stability:
< ±5x10-7 per year
< ±1x10-7 per 5% change in VDD
< ±5x10-10 per 10% change in load
Short term stability:
< ±5x10-12 over 1 sec (5.0MHz)
< ±1x10-11 over 1 sec (10.0MHz)
Temperature stability: < ±1x10-7
< ±5x10-8
˿
Operating temperature range:
0 to +50°C
-20 to +60°C
-20 to +70°C
˿
˿
Storage temperature range:
-40 to +90°C
Output waveform:
Sine wave, 1.5V p-p ±0.5V into 50⏲
Frequency adjustment:
±2x10-6 (typ) over +0.5 to +6.0V
(sufficient for 10 years ageing min)
Stabilised +6.0V supply provided
Mechanical ±5x10-7
Supply voltage (VDD):
+12V (±0.5V)
+15V (±0.5V)
+18V (±0.5V)
˿
˿
Power consumption:
4.5W max at switch on
1.0W typ when stabilised at 25°C
Warm up:
< ±5x10-8 after 10mins at +25°C
Phase noise (@ 10.0MHz):
< -110 dBc/Hz @ 10Hz
< -130 dBc/Hz @ 100Hz
< -145 dBc/Hz @ 1kHz
< -150 dBc/Hz @ 10kHz
< -150 dBc/Hz @ 50kHz
External connectors:
D9
D9 + single SMA
D9 + single SMB
Other (single SMC/BNC/MCX)
˿
˿
˿
Harmonics: < -30dB wrt carrier
Shock:
IEC 68-2-27 Test Ea
50G for 11ms
Vibration:
IEC 68-2-06 Test Fc
10-55Hz, 1.5mm. 55-500Hz, 10G
Standard. ˿ Optional - Please specify required code(s) when ordering
Option
Codes
A
B
M
N
A
D
F
N
P
R
D
A
B
specify
Ordering Information
Product name + option codes (if any) + frequency
eg: HCD210 10.0MHz
Option code X (eg HCD210/X) denotes a custom specification.
Tel: +44 1460 256 100
30 Jun 2004
Fax: +44 1460 256 101
E-mail: [email protected]
Web: www.golledge.com
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet HCD210.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HCD210 | OCXO Sine Output | Golledge Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |