|
|
Número de pieza | ISG510067 | |
Descripción | DTV IF AGC AMPLIFIER | |
Fabricantes | ISG | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ISG510067 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! ISG510067
PRELIMINARY DATA SHEET
DTV IF AGC AMPLIFIER
FEATURES
• 3.3 V SINGLE SUPPLY OPERATION
• LOW POWER CONSUMPTION (330 mW)
• LOW DISTORTION
• 85 dB TOTAL VOLTAGE GAIN
• 54 dB TOTAL GAIN CONTROL RANGE
• 25-100 MHZ OPERATION
DESCRIPTION
The ISG510067 consists of an input AGC amplifier and a
video/AGC amplifier. The amplifiers are designed to interface
directly with standard saw filters. The AGC is delayed between
the two blocks for optimal NF and IM3 performance across the
full AGC range. The final stage is capable of providing 2 VPP
into a 500 Ω load. There are two package options MLP28 and
TSSOP 20.
APPLICATIONS
• Digital Terrestrial Tuners • Digital TV Sets.
FUNCTIONAL DIAGRAM
VDD
SAW FILTER
28,18 27,17 26,19 25, X 24,15 23,14 22,13
1, X
2, 20
NC*
3, 1
NC*
4, X
5, X
6, 2
VDD
7, 6
RF
AMP
VIDEO
AMP
21,16
20,11
OUTPUT
19,12 MATCHING
VID OUT
18,10
17, 9
VDD
16, 8
15, 7
8, 3 9, 4 10, X 11, 5 12, X 13, X 14, X
RF AGC
ELECTRICAL CHARACTERISTICS (TA = 25°wCww, .VDaDtaDSh=eet34U.3.coVm , unless otherwise specified)
SYMBOLS PARAMETERS AND CONDITIONS
UNITS
MIN
RF Performance
RFIN RF Input Frequency Range
GMAX Maximum Gain*
VAGC AGC Voltage
AGC AGC Dynamic Range VAGC = 0 to 3 V
IM3 Third Order Intermodulation, 1 VPP Differential Output, 1K ohm load
Third Order Intermodulation, 2 VPP Differential Output, 1K ohm load
IFOUT IF Output Level, Differential Output, 1K ohm load
NF Noise Figure, VAGC = 3 V
GINPUT Input Amp Gain, VAGC = 3 V
GVIDEO Video Amp Gain, VAGC = 3 V
DC Performance
VDD Supply Voltage
IDD Supply Current
* Includes saw filter loss.
MHz
dB
V
dB
dBc
dBc
VPP
dB
dB
dB
V
mA
0
ABSOLUTE MAXIMUM RATINGS
(TC = 25°C unless otherwise noted)
SYMBOLS
PARAMETERS
UNITS RATINGS
VDD (GND) Supply Voltage (GND)
TOP Operating Temperature
V -0.3 to +3.6
°C -40 to +85
TSTG
Storage Temperature
Junction Temperature
°C -65 to +150
°C +150
Thermal Resistance (Ø ja) °C/W
34
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
TYP
43.75
85
54
60
48
1
13.5
44
55
3.3
100
MAX
100
3
REV. C
7/21/2004
1
1 page PACKAGE INFORMATION MLP-28 (Units in mm)
ISG510067
1. Dimensions and tolerances conform to ASME Y14.5-1994.
2. All dimensions are in millimeters. All angles are in degrees.
3. N is the total number of terminals.
4. The terminal numbering convention shall conform to JESD 95-1, SPP-012. The terminal #1 identifier may be either a mold or
marked feature.
5. Dimension b applies to metallized terminal and is measured between 0.25 and 0.3 mm from terminal tip.
6. ND and NE refer to the number of terminals on each D and E side respectively.
7. Co-planarity applies to the exposed heatsink slug as well as the terminals.
REV. C
7/21/2004
5
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet ISG510067.PDF ] |
Número de pieza | Descripción | Fabricantes |
ISG510065 | CATV OUT-OF-BAND TUNER | ISG |
ISG510067 | DTV IF AGC AMPLIFIER | ISG |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |