|
|
1N5408のメーカーはON Semiconductorです、この部品の機能は「1000V, 3A, Recovery Rectifier」です。 |
部品番号 | 1N5408 |
| |
部品説明 | 1000V, 3A, Recovery Rectifier | ||
メーカ | ON Semiconductor | ||
ロゴ | |||
このページの下部にプレビューと1N5408ダウンロード(pdfファイル)リンクがあります。 Total 6 pages
www.DataSheet4U.com
1N5400 thru 1N5408
1N5404 and 1N5406 are Preferred Devices
Axial−Lead Standard
Recovery Rectifiers
Lead mounted standard recovery rectifiers are designed for use in
power supplies and other applications having need of a device with the
following features:
Features
• High Current to Small Size
• High Surge Current Capability
• Low Forward Voltage Drop
• Void−Free Economical Plastic Package
• Available in Volume Quantities
• Plastic Meets UL 94 V−0 for Flammability
• These are Pb−Free Devices
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.1 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Polarity: Cathode Indicated by Polarity Band
http://onsemi.com
STANDARD RECOVERY
RECTIFIERS
50−1000 VOLTS
3.0 AMPERES
AXIAL LEAD
CASE 267−05
STYLE 1
MARKING DIAGRAM
A
1N
540x
YYWWG
G
A = Assembly Location
1N540x = Device Number
x = 0, 1, 2, 4, 6, 7 or 8
YY = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of
this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
December, 2006 − Rev. 9
1
Publication Order Number:
1N5400/D
1 Page 1N5400 thru 1N5408
NOTE 1 — AMBIENT MOUNTING DATA
Data shown for thermal resistance junction−to−ambient (RqJA) for the
mountings shown is to be used as typical guideline values for preliminary
engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR
Mounting
Method
1
2
3
Lead Length, L (IN)
1/8 1/4 1/2 3/4
50 51 53 55
58 59 61 63
28
RqJA
°C/W
°C/W
°C/W
MOUNTING METHOD 1
P.C. Board Where Available
Copper Surface area is small
LL
ÉÉÉÉÉÉÉÉÉ
MOUNTING METHOD 2
Vector Push−In Terminals T−28
ÉÉÉLÉÉÉÉL ÉÉ
MOUNTING METHOD 3
P.C. Board with
1−1/2” x 1−1/2”
Copper Surface
L = 1/2”
ÉÉÉÉÉÉÉÉÉÉBoard Ground Plane
http://onsemi.com
3
3Pages 1N5400 thru 1N5408
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267−05
ISSUE G
K
D
1
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2 2. CONTROLLING DIMENSION: INCH.
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
B
A 0.287 0.374 7.30 9.50
K
B 0.189 0.209 4.80 5.30
D 0.047 0.051 1.20 1.30
K 1.000 −−− 25.40 −−−
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
6
1N5400/D
6 Page | |||
ページ | 合計 : 6 ページ | ||
|
PDF ダウンロード | [ 1N5408 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
1N540 | Diode Switching 400V 3A 2-Pin SOD-64 Ammo | New Jersey Semiconductor |
1N5400 | STANDARD RECOVERY RECTIFIER, 50 VOLTS 3.0 AMPERE | Motorola Inc |
1N5400 | HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes) | Pan Jit International Inc. |
1N5400 | 3.0 AMPS. SILICON RECTIFIERS | Surge Components |