|
|
Número de pieza | USB2504 | |
Descripción | INTEGRATED USB2.0 COMPATIBLE 4 - PORT HUB | |
Fabricantes | SMSC Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de USB2504 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
USB2504/USB2504A
Integrated USB2.0
Compatible 4-Port Hub
PRODUCT FEATURES
■ Integrated USB2.0 Compatible 4-Port Hub
— 4 Transaction Translators for highest performance
— High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and
Low-Speed (1.5Mbits/s) compatible
— Full power management with per port or ganged,
selectable power control
— Detects Bus-Power/Self-Power source and changes
mode automatically
■ Complete USB Specification 2.0 Compatibility
— Includes USB2.0 Transceivers
■ VID/PID/DID, and Port Configuration for Hub via:
— Single Serial I2C EEPROM
— SMBus Slave Port
■ Default VID/PID/DID, allows functionality when
configuration EEPROM is absent
■ Hardware Strapping options allow for configuration
without an external EEPROM or SMBus Host
Data Brief
■ On-Board 24MHz Crystal Driver Circuit or 24 MHz
external clock driver
■ Internal PLL for 480MHz USB2.0 Sampling
■ Internal 1.8V Linear Voltage Regulator
■ Integrated USB termination and Pull-up/Pull-down
resistors
■ Internal Short Circuit protection of USB differential
signal pins
■ 1.8 Volt Low Power Core Operation
■ 3.3 Volt I/O with 5V Input Tolerance
■ 64-Pin TQFP or 56 Pin QFN Package; green, lead-
free package also available
SMSC USB2504/USB2504A
PRODUCT PREVIEW
Revision 1.8 (11-11-05)
1 page Integrated USB2.0 Compatible 4-Port Hub
Package Outlines
Figure 2 64 Pin TQFP Package Outline (10x10x1.4 mm body - 2 mm footprint)
Table 1 64 Pin TQFP Package Parameters
MIN
NOMINAL
MAX
A~
~ 1.60
A1 0.05 ~ 0.15
A2 1.35 ~ 1.45
D 11.80 ~ 12.20
D1 9.80
~ 10.20
E 11.80 ~ 12.20
E1 9.80
~ 10.20
H 0.09 ~ 0.20
L 0.45 0.60 0.75
L1 ~ 1.00 ~
e 0.50 Basic
q 0o ~ 7o
W 0.17 0.22 0.27
R1 0.08
~
~
REMARKS
Overall Package Height
Standoff
Body Thickness
X Span
X body Size
Y Span
Y body Size
Lead Frame Thickness
Lead Foot Length
Lead Length
Lead Pitch
Lead Foot Angle
Lead Width
Lead Shoulder Radius
R2 0.08 ~ 0.20
ccc ~
~ 0.08
Lead Foot Radius
Coplanarity
Notes:
1. Controlling Unit: millimeter.
2. Tolerance on the true position of the leads is ± 0.04 mm maximum.
3. Package body dimensions D1 and E1 do not include the mold protrusion.
Maximum mold protrusion is 0.25 mm per side.
4. Dimension for foot length L measured at the gauge plane 0.25 mm above the seating plane.
5. Details of pin 1 identifier are optional but must be located within the zone indicated.
SMSC USB2504/USB2504A
5
PRODUCT PREVIEW
Revision 1.8 (11-11-05)
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet USB2504.PDF ] |
Número de pieza | Descripción | Fabricantes |
USB2502 | 2-Port USB 2.0 Hub Controller | Microchip |
USB2502 | 2-Port USB 2.0 Hub Controller | SMSC Corporation |
USB2503 | Integrated USB 2.0 Compatible 3-Port Hub | Microchip |
USB2503 | Integrated USB2.0 Compatible 3-Port Hub | SMSC Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |