DataSheet.jp

EV-2 の電気的特性と機能

EV-2のメーカーはCirrus Logicです、この部品の機能は「Digital Audio Networking Processor」です。


製品の詳細 ( Datasheet PDF )

部品番号 EV-2
部品説明 Digital Audio Networking Processor
メーカ Cirrus Logic
ロゴ Cirrus Logic ロゴ 




このページの下部にプレビューとEV-2ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

EV-2 Datasheet, EV-2 PDF,ピン配置, 機能
www.DataSheet4U.com
CobraNet™ EV-2
Digital Audio Networking Processor
CobraNetTM
EV-2 Development System Manual
http://www.cirrus.com
©Copyright 2005 Cirrus Logic, Inc.
SEP 2005
EV-2MAN21

1 Page





EV-2 pdf, ピン配列
CobraNet™ EV-2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Required Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Included: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Not Supplied: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Switch and Connector Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
J300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
J401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
J700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
P450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
P501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
P504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
SW200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SW201-SW204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SW500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Detailed Description of EV-2 Components . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The Microcontroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Microcontroller Memory Space: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Microcontroller Port Connections: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Interfacing the Microcontroller to the CM . . . . . . . . . . . . . . . . . . . . . . . . .13
Programming the Microcontroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Interfacing Serial Audio to the CM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
FPGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Configuring the FPGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Functional Discussion of FPGA Operation . . . . . . . . . . . . . . . . . . . . . . . .18
Hex Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
EV-2 Schematics, Page-by-Page Description . . . . . . . . . . . . . . . . . . . . . . . .22
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Microcontroller and Hex Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
A/D Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
D/A Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Connectors and Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Optional VCXO and clock buffers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
AES3 Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Power Supply Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
FPGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Appendix A: Definition of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Appendix B: EV-2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Appendix C: Other Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Appendix D: EV-2 Schematic Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Appendix E: EV-2 Command Line Interface. . . . . . . . . . . . . . . . . . . . . . . . . . 38
Rev. 2.1
3


3Pages


EV-2 電子部品, 半導体
CobraNet™ EV-2
Required Materials
Getting Started
Included:
The CobraNet EV-2 Development Package ships with the following materials:
• EV-2 module w/ CM CobraNet PCB
Qty. (2)
• 3’ CAT5 crossover cable
Qty. (1)
• 6 - Pin Phoenix-style audio connectors
Qty. (6)
NOTE:
In order to provide you with the latest versions of our firmware and software
development kit (SDK), we use web-based distribution for our updates. To obtain
the latest versions of documentation and software, please go to
www.cirrus.com/cobranetsoftware.
Not Supplied:
• Two (2) ATX computer power supplies with cables are required, one for each EV-2
module. These devices are commonly available at computer retail stores.
• Audio cables.
• RS232 cables. (Not required to pass audio.)
Setup Procedure
• Using the supplied Phoenix connectors, build audio input and output cables and two
AES3 cables (if desired). These will be used to connect your audio input and output
devices to the EV-2 modules. For analog audio pin assignments, see Figure 2 or Figure 3
below. For AES3 pin assignments, see Figure 4 below.
• Connect a power supply to the ATX Power Connector at P450 on each EV-2 module.
• Connect the CAT5 crossover cable between the Ethernet jacks at J5 on each CM board.
• Connect a stereo audio source to the analog inputs at J300.
• Connect a stereo audio monitor to the analog outputs at J401.
• Apply power to both EV-2 modules.
• Verify that you have established a proper connection. See Table 1 on page 7 for Ethernet
connector LED status The LED CR710, if on, indicates that the AES3 receiver does not
detect a valid AES3 data input stream. If AES3 I/O is not being used, this can be disre-
garded. Otherwise, connect a proper AES3 signal to J700. Note that there must be a valid
AES3 input for the AES3 output to work.
Rev. 2.1
6

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ EV-2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
EV-101

Triple I/O Expander Load Switch

ANALOGICTECH
ANALOGICTECH
EV-2

Digital Audio Networking Processor

Cirrus Logic
Cirrus Logic
EV-2101CA

VOLTAGE CONTROLLED SAW OSCILLATOR

Epson Company
Epson Company


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap