DataSheet.jp

ET9600 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ET9600
部品説明 THREE CHANNEL DIFFERENTIAL LINE DRIVER IC
メーカ ETIC
ロゴ ETIC ロゴ 



Total 2 pages
		

No Preview Available !

ET9600 Datasheet, ET9600 PDF,ピン配置, 機能
www.DataSheet4U.com
THREE CHANNEL DIFFERENTIAL
LINE DRIVER IC
With built-in current sink to drive an LED
FEATURES
Supply Voltage Range 4.5V to 30V
Operation to 800KHz
CMOS and TTL Compatible Inputs
Outputs RS-422A Compatible
High Impedance Buffered Inputs with Hysteresis
Outputs short circuit protected
70mA peak SINK/SOURCE current
Outputs Protected by Thermal Shut-Down
APPLICATIONS
Optical Encoders
Industrial Controls
ET9600
DESCRIPTION
These line drivers are similar to the four channel 26ET31, with the added feature of providing an internal LED drive.
The device is biased so that the base of the LED drive transistor (shown) is held at 2.5V. To set the LED current,
connect a resistor from RSET to ground. For more information on LED drive, see application note APP-D2.
Voltage connected to the VCC pin is regulated for use by logic functions within the chip, while the output drivers run
off this voltage without modification.
The device marking (see photo) includes the suffix SCP to denote that this version has ‘short circuit protection’.
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Operating Temperature
Range
Supply Voltage Range
TA
VCC
Min.
-40
4.5
Max.
125
30
Units
°C
V
Ref.
Note 1
ETIC RESERVES THE RIGHT TO MAKE CHANGES AT ANY TIME TO IMPROVE THE DESIGN AND TO SUPPLY THE BEST PRODUCT.
© 2000, Rev A1
iC-Haus GmbH
Integrated Circuits
Am Kuemmerling 18, D-55294 Bodenheim
Page 1 of 2
Tel +49-6135-9292-0
Fax +49-6135-9292-192
http://www.ichaus.com

1 Page





ページ 合計 : 2 ページ
PDF
ダウンロード
[ ET9600.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ET9600

THREE CHANNEL DIFFERENTIAL LINE DRIVER IC

ETIC
ETIC

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap