DataSheet.jp

5B38 の電気的特性と機能

5B38のメーカーはAnalog Devicesです、この部品の機能は「Wide-Bandwidth Strain Gage Input」です。


製品の詳細 ( Datasheet PDF )

部品番号 5B38
部品説明 Wide-Bandwidth Strain Gage Input
メーカ Analog Devices
ロゴ Analog Devices ロゴ 




このページの下部にプレビューと5B38ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

5B38 Datasheet, 5B38 PDF,ピン配置, 機能
www.DataSheet4U.com
Isolated, Wide-Bandwidth Strain Gage Input
FEATURES
Wide-bandwidth Single-Channel Signal Conditioning
Interfaces, Amplifies, and Filters signals from full-bridge and
half-bridge strain-gage transduces between 300and 10kΩ.
Isolated Precision Output of -5V to +5V.
10 kHz bandwidth of the 5B38 ideally suits to measure
signals that vary rapidly with time.
Module circuitry can withstand 240v rms at the input screw-
terminals.
All 5B38 series modules are mix-and-match and Hot
Swappable.
APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
PRODUCT OVERVIEW
The 5B Series represents an innovative generation of low cost,
high performance plug-in signal conditioners. Designed for
industrial applications, these modules incorporate highly
reliable transformer-based isolation and automated surface-
mount manufacturing technology. They are compact,
economical components whose performance exceeds that
available from more expensive devices. Combining 1500 V rms
continuous isolation, +0.05% calibrated accuracy, small size and
low cost, the 5B Series is an attractive alternative to expensive
signal conditioners and in-house designs
All modules are potted and identical in pin-out and size (2.27” x
2.32” x 0.595”). They can be mixed and matched, permitting
users to address their exact needs, and may be “hot swapped
without disturbing field wiring or power. The isolated input
modules provide 0 to +5V or +5V outputs and accept J, K, T, E,
R, S, N, or B type thermocouples.
These modules feature complete signal conditioning functions
including 240 V rms input protection, filtering, chopper
stabilized low drift +1 uV/oC amplification, 1500 V rms
isolation, and sensor excitation when required.
All modules feature excellent common mode rejection and
meet industrial transient surge withstand specifications.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
FUNCTIONAL BLOCK DIAGRAM
5B38
Figure 1. 5B38 Functional Block Diagram
There are also a number of backplanes and mounting sockets
which provide a complete signal conditioning solution for end
users. Each backplane incorporates screw terminals for field
wiring inputs and outputs and cold junction sensors for
thermocouple applications.
These signal conditioners are designed to provide an easy and
convenient solution to signal conditioning problems of both
designers and end users in measurement and control
applications. Typical uses include microcomputer-based
measurement systems, standard data acquisition systems,
programmable controllers, analog recorders and dedicated
control systems. The 5 B series modules are ideally suited to
applications where monitoring and control of temperature,
pressure, flow, rotation and other analog signals are required.
The 5B Series modules and backplanes are approved by Factory
Mutual (FM) and the 5B Series modules are approved by the
Canadian Standards Association (CSA) for use in Class 1,
Division 2, Groups A, B, C, and D locations. These approvals
certify that the 5B Series is suitable for use in locations where a
hazardous concentration of flammable gas may exist only under
fault conditions of operation. Equipment of this category is
called “non-incendive” and they need no special enclosures or
other physical safeguards.
The 5B series modules and backplanes have been tested and
passed the stringent heavy industrial requirements of the
European Union’s electromagnetic compatibility (ENC)
directive – EN50082-1 and EN50081-2. When used according
to installation directions (refer to 5B series User Manual), any
errors caused by EMI/RFI interference will be less than 0.1% of
the full scale 5B measurement range for field strengths up to 10
V/M and frequencies up to 1 GHz.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.

1 Page





5B38 pdf, ピン配列
5B38 Models Available
Model
Input Bridge Type
Bridge Range
5B38-02
Full Bridge
300 to 10 k
5B38-04
Half Bridge
300 to 10 k
5B38-05
Full Bridge
300 to 10 k
5B38-Custom * 300 to 10 k
* Custom Input/sensitivity ranges are available. Refer to configuration guide.
Excitation
+10.0 V
+10.0 V
+10.0 V
+10.0 V
Sensitivity
3 mV/V
3 mV/V
2 mV/V
*
5B38
Output Range
-5 V to +5 V
-5 V to +5 V
-5 V to +5 V
-5 V to +5 V
5B38 Specifications
Description
Standard Ranges
Custom Ranges
Output Ranges (RL > 50 k)
Initial @ +25°C
Nonlinearity
Input Offset vs. Temperature
Output Offset vs. Temperature
Gain vs. Temperature
Excitation Voltage Output @ full load
Load Range
Load Regulation
vs. Temperature
Half Bridge Voltage Level
Half Bridge Voltage vs. Temperature
Input Bias Current
Power On
Power Off
Overload
Input, 0.1 Hz to 10 Hz Bandwidth
Input, 10 kHz Bandwidth
Output, 100 kHz Bandwidth
Model 5B38 Full Bridge
Input Ranges
±20 mV (2 mV/V Sensitivity)
±30 mV (3 mV/V Sensitivity)
±10 mV to ±500 mV
-5 V to +5 V
Accuracy2
±0.08% Span ±10 µV RTI
±0.02% Span
±1 µV/°C
±40 µV/°C
±25 ppm of Reading/°C
+10 V ±3 mV
10 k, minimum; 300 , maximum
±5 ppm/mA
±15 ppm/°C
N/A
N/A
±3 nA
Input Resistance
20 M, minimum
40 k, minimum
40 k, minimum
Noise
0.4 µV rms
±70 nV/ Hz
10 mV peak-peak
Rev. 0 | Page 3 of 8
Model 5B38 Half Bridge
±30 mV (3 mV/V Sensitivity)
*
*
±0.08% Span ±1 mV RTI
*
*
*
*
*
*
*
*
+5 V ±1 mV
±15 ppm/°C
*
*
*
*
2 µV rms
±250 nV/ Hz
*


3Pages


5B38 電子部品, 半導体
OUTLINE DIMENSIONS
5B38
Figure 5. Outline Dimensions
Rev. 0 | Page 6 of 8

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ 5B38 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
5B30

(5B30 / 5B31) Millivolt and Voltage Input

Analog Devices
Analog Devices
5B31

(5B30 / 5B31) Millivolt and Voltage Input

Analog Devices
Analog Devices
5B32

Single-Channel Signal Conditioning Module

Analog Devices
Analog Devices
5B34

Isolated Linearized RTD Input

Analog Devices
Analog Devices


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap