|
|
PDF ADG836L Data sheet ( Hoja de datos )
| Número de pieza | ADG836L | |
| Descripción | 0.5 OHM CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ADG836L (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
FEATURES
0.5 Ω typical on resistance
0.8 Ω maximum on resistance at 125°C
1.65 V to 3.6 V operation
Automotive temperature range: –40°C to +125°C
Guaranteed leakage specifications up to 125°C
High current carrying capability: 300 mA continuous
Rail-to-rail switching operation
Fast switching times <20 ns
Typical power consumption: <0.1 µW
APPLICATIONS
Cellular phones
PDAs
MP3 players
Power routing
Battery-powered systems
PCMCIA cards
Modems
Audio and video signal routing
Communication systems
GENERAL DESCRIPTION
The ADG836L is a low voltage CMOS device containing two
independently selectable single-pole, double-throw (SPDT)
switches. This device offers ultralow on resistance of less than
0.8 Ω over the full temperature range. The ADG836L is fully
specified for 3.3 V, 2.5 V, and 1.8 V supply operation.
Each switch conducts equally well in both directions when on
and has an input signal range that extends to the supplies. The
ADG836L exhibits break-before-make switching action.
The ADG836L is available in a 10-lead package.
0.5 Ω CMOS 1.65 V to 3.6 V
Dual SPDT/2:1 MUX
ADG836L
FUNCTIONAL BLOCK DIAGRAM
ADG836L
S1A
D1
S1B
IN1
IN2
S2A
D2
S2B
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 1.
PRODUCT HIGHLIGHTS
1. Less than 0.8 Ω over full temperature range of
−40°C to +125°C.
2. Single 1.65 V to 3.6 V operation.
3. Compatible with 1.8 V CMOS logic.
4. High current handling capability (300 mA continuous
current at 3.3 V).
5. Low THD + N (0.02% typ).
6. Small 10-lead MSOP package.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.
1 page  
ADG836L
Table 3. VDD = 1.65 V ± 1.95 V, GND = 0 V, unless otherwise noted.1
Parameter
+25°C −40°C – +85°C −40°C – +125°C
ANALOG SWITCH
Analog Signal Range
0 V to VDD
On Resistance (RON)
1
1.4 2.2
2.2
24
4
On Resistance Match between 0.1
Channels (∆RON)
LEAKAGE CURRENTS
Source Off Leakage IS (OFF)
±0.2
±0.4 ±4
±25
Channel On Leakage ID, IS (ON) ±0.2
±0.6 ±10
±75
DIGITAL INPUTS
Input High Voltage, VINH
0.65 VDD
Input Low Voltage, VINL
0.35 VDD
Input Current
IINL or IINH
0.005
±0.1
CIN, Digital Input Capacitance
4
DYNAMIC CHARACTERISTICS2
tON 28
37 38
39
tOFF 7
9 10
11
Break-before-Make Time Delay 21
(tBBM)
5
Charge Injection
20
Off Isolation
−67
Unit
V
Ω typ
Ω max
Ω typ
Ω typ
nA typ
nA max
nA typ
nA max
V min
V max
µA typ
µA max
pF typ
ns typ
ns max
ns typ
ns max
ns typ
ns min
pC typ
dB typ
Channel-to-Channel Crosstalk −90
dB typ
−67 dB typ
Total Harmonic Distortion
(THD + N)
Insertion Loss
–3 dB Bandwidth
CS (OFF)
CD, CS (ON)
POWER REQUIREMENTS
IDD
0.14
−0.08
57
25
75
0.003
1.0
4
%
dB typ
MHz typ
pF typ
pF typ
µA typ
µA max
Test Conditions/Comments
VDD = 1.8 V, VS = 0 V to VDD, IS = 10 mA
(Figure 18)
VDD = 1.65 V, VS = 0 V to VDD, IS = 10 mA
VDD = 1.65 V, VS = 0.7 V, IS = 10 mA
VDD = 1.95 V
VS = 0.6 V/1.65 V, VD = 1.65 V/0.6 V
(Figure 19)
VS = VD = 0.6 V or 1.65 V Figure 20
VIN = VINL or VINH
RL = 50 Ω, CL = 35 pF
VS = 1.5 Ω/0 V (Figure 21)
RL = 50 Ω, CL = 35 pF
VS = 1.5 V (Figure 21)
RL = 50 Ω, CL = 35 pF
VS1 = VS2 = 1 V (Figure 22)
VS = 1 V, RS = 0 V, CL = 1 nF (Figure 23)
RL = 50 Ω, CL = 5 pF, f = 100 kHz,
(Figure 24)
S1A−S2A/S1B−S2B;
RL = 50 Ω, CL = 5 pF, f = 100 kHz
(Figure 27)
S1A−S1B/S2A−S2B;
RL = 50 Ω, CL = 5 pF, f = 100 kHz
(Figure 25)
RL = 32 Ω, f = 20 Hz to 20 kHz,
VS = 1.2 V p-p
RL = 50 Ω, CL = 5 pF (Figure 25)
RL = 50 Ω, CL = 5 pF (Figure 25)
VDD = 1.95 V
Digital inputs = 0 V or 1.95 V
1 Temperature range for Y version is −40°C to +125°C.
2 Guaranteed by design, not subject to production test.
Rev. A | Page 5 of 16
5 Page 
TEST CIRCUITS
IDS
V1
SD
VS RON = V1/IDS
Figure 18. On Resistance
ADG836L
IS (OFF)
AS
VS
ID (OFF)
DA
VD
Figure 19. Off Leakage
ID (ON)
NC S D A
VD
Figure 20. On Leakage
VDD
0.1µF
VDD
VS S1B
S1A
D
IN
GND
RL
50Ω
VOUT
CL
35pF
VIN
VOUT
50%
90%
tON
Figure 21. Switching Times, tON, tOFF
50%
90%
tOFF
VDD
0.1µF
VDD
VS S1B
S1A
D
IN
GND
RL
50Ω
VOUT
CL
35pF
VIN 0V
50%
VOUT
80%
tBBM
Figure 22. Break-before-Make Time Delay, tBBM
50%
80%
tBBM
VDD
VS D
IN
S1B
S1A
GND
NC
VOUT
1nF
SW ON
VIN
SW OFF
VOUT
∆VOUT
QINJ = CL × ∆VOUT
Figure 23. Charge Injection
Rev. A | Page 11 of 16
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet ADG836L.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ADG836 | 0.5CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX | Analog Devices |
| ADG836L | 0.5 OHM CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |