|
|
PDF ISL54056 Data sheet ( Hoja de datos )
| Número de pieza | ISL54056 | |
| Descripción | Ultra Low ON-Resistance Quad SPDT Analog Switch | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISL54056 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
®
Data Sheet
Ultra Low ON-Resistance, +1.65V to +4.5V,
Single Supply, Quad SPDT (Dual DPDT)
Analog Switch
The Intersil ISL54056 device is a low ON-resistance, low
voltage, bidirectional, Quad SPDT (Dual DPDT) analog
switch designed to operate from a single +1.65V to +4.5V
supply. Targeted applications include battery powered
equipment that benefit from low RON (0.39Ω) and fast
switching speeds (tON = 30ns, tOFF = 16ns). The digital logic
input is 1.8V logic-compatible when using a single +3V supply.
With a supply voltage of 4.2V and logic high voltage of 2.85V
at both logic inputs, the part draws only 12µA max of ICC
current.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL54056 is offered in small form factor package, alleviating
board space limitations.
The ISL54056 consists of four SPDT switches. It is configured
as a dual double-pole/double-throw (DPDT) device with two
logic control inputs that control two SPDT switches each. The
configuration can be used as a dual differential 2-to-1
multiplexer/demultiplexer. The ISL54056 is pin compatible
with the NLAS3799 and NLAS3799L.
TABLE 1. FEATURES AT A GLANCE
ISL54056
Number of Switches
4
SW Quad SPDT (Dual DPDT)
4.3V RON
4.3V tON/tOFF
3.0V RON
3.0V tON/tOFF
1.8V RON
1.8V tON/tOFF
Package
0.39Ω
30ns/16ns
0.45Ω
34ns/18ns
0.65Ω
48ns/23ns
16 Ld 2.6x1.8x0.5mm µTQFN
October 30, 2006
ISL54056
FN6357.1
Features
• Pb-Free Plus Anneal Available (RoHS Compliant)
• Pin Compatible Replacement for the NLAS3799 and
NLAS3799L
• ON Resistance (RON)
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39Ω
- V+ = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.45Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65Ω
• RON Matching between Channels . . . . . . . . . . . . . . . . 0.05Ω
• RON Flatness Across Signal Range . . . . . . . . . . . . . . . 0.05Ω
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (PD) . . . . . . . . . . . . . . . . <0.68μW
• Fast Switching Action (V+ = +4.3V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16ns
• Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Low ICC Current when VinH is not at the V+ Rail
• Available in 16 Ld 2.6x1.8x0.5mm µTQFN
• ESD HBM Rating
- COM Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9kV
- All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6kV
Applications
• Battery Powered, Handheld, and Portable Equipment
- Cellular/Mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and Video Switching
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
www.DataSheet4U.com
ISL54056
Electrical Specifications - 3V Supply
Test Conditions: V+ = +2.7V to +3.3V, GND = 0V, VINH = 1.4V, VINL = 0.5V (Note 4),
unless otherwise specified (Continued)
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C) MIN TYP MAX UNITS
Charge Injection, Q
OFF Isolation
CL = 1.0nF, VG = 0V, RG = 0Ω (See Figure 2)
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS
(See Figure 4)
25
25
126 pC
65 dB
Crosstalk (Channel-to-Channel)
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS
(See Figure 6)
25
-85 dB
Total Harmonic Distortion
f = 20Hz to 20kHz, VCOM = 2VP-P, RL = 600Ω
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V (See Figure 7)
POWER SUPPLY CHARACTERISTICS
25
25
25
0.012
38
102
%
pF
pF
Positive Supply Current, I+
V+ = 3.6V, VIN = 0V or V+
25
0.021
μA
Full 0.72 μA
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 3.6V, VIN = 0V or V+
Full
Full 1.4
Full -0.5
0.5 V
V
0.5 μA
Electrical Specifications - 1.8V Supply
Test Conditions: V+ = +1.65V to +2V, GND = 0V, VINH = 1.0V, VINL = 0.4V (Note 4),
unless otherwise specified
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C) MIN TYP MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
Full 0
V+ V
ON Resistance, RON
V+ = 1.8V, ICOM = 100mA, VNO or VNC = 0V to V+
(See Figure 5)
25
Full
0.65 0.8 Ω
0.85 Ω
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 1.65V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF 25
50 ns
(See Figure 1)
Full 55 ns
Turn-OFF Time, tOFF
V+ = 1.65V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF 25
25 ns
(See Figure 1)
Full 30 ns
Break-Before-Make Time Delay, tD V+ = 2.0V, VNO or VNC = 1.0V, RL = 50Ω, CL = 35pF Full 8 ns
(See Figure 3)
Charge Injection, Q
CL = 1.0nF, VG = 0V, RG = 0Ω (See Figure 2)
DIGITAL INPUT CHARACTERISTICS
25
48 pC
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 2.0V, VIN = 0V or V+
Full
Full 1.0
Full -0.5
0.4 V
V
0.5 μA
5 FN6357.1
October 30, 2006
5 Page 
www.DataSheet4U.com
ISL54056
Typical Performance Curves TA = +25°C, unless otherwise specified (Continued)
V+ = 3V
0
GAIN
-20
-10
V+ = 4.3V
-20
-30
-40
10
20
30
40
PHASE
RL = 50Ω
VIN = 0.2VP-P to 2VP-P
1M
10M
100M
FREQUENCY (Hz)
FIGURE 21. FREQUENCY RESPONSE
0
20
40
60
80
100
600M
-50
ISOLATION
-60
50
60
-70 70
-80 80
CROSSTALK
-90 90
-100
100
-110
1k
10k 100k 1M
110
10M 100M 500M
FREQUENCY (Hz)
FIGURE 22. CROSSTALK AND OFF ISOLATION
Die Characteristics
SUBSTRATE POTENTIAL (POWERED UP):
GND
TRANSISTOR COUNT:
228
PROCESS:
Si Gate CMOS
11 FN6357.1
October 30, 2006
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ISL54056.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISL54050 | Ultra Low ON-Resistance Dual SDPT Analog Switch | Intersil Corporation |
| ISL54051 | (ISL54051 / ISL54052) Single SPST Analog Switches | Intersil Corporation |
| ISL54052 | (ISL54051 / ISL54052) Single SPST Analog Switches | Intersil Corporation |
| ISL54053 | SPDT Analog Switch | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |