IRMCF371 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 IRMCF371
部品説明 Sensorless Motor Control IC
メーカ International Rectifier
ロゴ International Rectifier ロゴ 

Total 8 pages

No Preview Available !

IRMCF371 Datasheet, IRMCF371 PDF,ピン配置, 機能
Outline Sheet No. 11-03-06
Sensorless Motor Control IC for Appliances
„ MCETM (Motion Control Engine) - Hardware based
computation engine for high efficiency sinusoidal
sensorless control of permanent magnet AC motor
„ Supports both interior and surface permanent
magnet motors
„ Built-in hardware peripheral for single shunt
current feedback reconstruction
„ No external current or voltage sensing operational
amplifier required
„ Three/two-phase Space Vector PWM
„ Analog output (PWM)
„ Embedded 8-bit high speed microcontroller (8051)
for flexible I/O and man-machine control
„ JTAG programming port for emulation/debugger
„ Serial communication interface (UART)
„ I2C/SPI serial interface
„ Watchdog timer with independent analog clock
„ Three general purpose timers/counters
„ Two special timers: periodic timer, capture timer
„ External EEPROM and internal RAM facilitate
debugging and code development
„ Pin compatible with IRMCK371, OTP-ROM version
„ 1.8V/3.3V CMOS
Product Summary
Maximum crystal frequency
60 MHz
Maximum internal clock (SYSCLK) frequency 128MHz
Sensorless control computation time
MCETM computation data range
11 μsec typ
16 bit signed
Program RAM loaded from external EEPROM 48K bytes
Data RAM
8K bytes
GateKill latency (digital filtered)
2 μsec
PWM carrier frequency counter
16 bits/ SYSCLK
A/D input channels
A/D converter resolution
12 bits
A/D converter conversion speed
2 μsec
8051 instruction execution speed
Analog output (PWM) resolution
8 bits
UART baud rate (typ)
57.6K bps
Number of I/O (max)
Package (lead-free)
IRMCF371 is a high performance RAM based motion control IC designed primarily for appliance applications. IRMCF371 is
designed to achieve low cost and high performance control solutions for advanced inverterized appliance motor control.
IRMCF371 contains two computation engines. One is Motion Control Engine (MCETM) for sensorless control of permanent
magnet motors; the other is an 8-bit high-speed microcontroller (8051). Both computation engines are integrated into one
monolithic chip. The MCETM contains a collection of control elements such as Proportional plus Integral, Vector rotator, Angle
estimator, Multiply/Divide, Low loss SVPWM, Single Shunt IFB. The user can program a motion control algorithm by
connecting these control elements using a graphic compiler. Key components of the sensorless control algorithms, such as the
Angle Estimator, are provided as complete pre-defined control blocks implemented in hardware. A unique analog/digital circuit
and algorithm to fully support single shunt current reconstruction is also provided. The 8051 microcontroller performs 2-cycle
instruction execution (60MIPS at 120MHz). The MCE and 8051 microcontroller are connected via dual port RAM to process
signal monitoring and command input. An advanced graphic compiler for the MCETM is seamlessly integrated into the
MATLAB/Simulink environment, while third party JTAG based emulator tools are supported for 8051 developments. IRMCF371
comes with a small QFP48 pin lead-free package.
This document is the property of International Rectifier and may not be copied or distributed without expressed consent.

1 Page

ページ 合計 : 8 ページ
[ IRMCF371.PDF ]


Link :



Sensorless Motor Control IC

International Rectifier
International Rectifier    |   2020   |  メール    |   最新    |   Sitemap