IRMCF312 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 IRMCF312
部品説明 Dual Channel Sensorless PM Motor Control IC
メーカ International Rectifier
ロゴ International Rectifier ロゴ 

Total 8 pages

No Preview Available !

IRMCF312 Datasheet, IRMCF312 PDF,ピン配置, 機能
Outline Data Sheet No. 03-10-06
Advanced Information
Dual Channel Sensorless PM Motor Control IC
MCETM(Motion Control Engine) based sinusoidal sensorless control
Product Summary
„ MCETM based hardware computation for complex Maximum clock input (crystal)
motor control algorithm
„ Enable two sensorless PM motor control and digital Internal max clock frequency (SYSCLK)
PFC control
„ Increase energy efficiency to exceed energy
Sensorless control computation time
MCETM computation data range
„ Supports both interior and surface permanent
magnet motors
Program RAM
„ Built-in hardware peripheral of single shunt current RAM
feedback reconstruction for compressor and fan
motor. No external OP amp required
GateKill latency (digital filtered)
„ 2 channel loss minimization Space Vector PWM
„ 3 channel analog output (PWM)
„ Embedded 8-bit high speed microcontroller (8051)
PWM carrier frequency data range
A/D input channels
for flexible I/O and man-machine control
„ JTAG programming port for emulation/debugger
„ 2 channel serial communication interface (UART)
„ I2C serial interface
„ Analog watchdog timer, 4 Timer/counter
„ External EEPROM and internal RAM facilitates
A/D converter resolution
A/D converter conversion speed
8051 instruction execution speed
Analog output (PWM) resolution
debugging and code development
„ Pin compatible with mask ROM version
„ 3.3V/1.8V CMOS
UART baud rate (typ)
60 MHz
120 MHz
11 μsec typ
16 bit signed
48K byte
8K byte
2 μsec
16 bit
12 bit
2 μsec
8 bit
57.6 kbps
IRMCF312 is a high performance RAM based motion control IC designed primarily for appliance applications. IRMCF312 is
designed to achieve low cost and high performance control solutions for advanced inverterized appliance motor control.
IRMCF312 contains two computation engines. One is Motion Control Engine (MCETM) for sensorless control of permanent
magnet motors; the other is an 8-bit high speed microcontroller (8051). Both computation engines are integrated into one
monolithic chip. The MCETM contains a collection of control elements such as Proportional plus Integral, Vector rotator, Angle
estimator, Multiply/Divide, Low loss SVPWM, SingleShuntIFB, etc., which are implemented in hardware. The user can
program a motion control algorithm by connecting these control elements using a graphic compiler. Key components of the
sensorless control algorithms, such as the Angle Estimator, are provided as complete pre-defined control blocks. A unique
analog/digital circuit and algorithm to fully support single shunt current reconstruction is also provided. The 8051
microcontroller performs 2-cycle instruction execution (60MIPS at 120MHz). The MCE and 8051 microcontroller are connected
via dual port RAM to process signal monitoring and command input. An advanced graphic compiler for the MCETM is
seamlessly integrated into the MATLAB/Simulink environment, while third party JTAG based emulator tools are supported for
8051 development. IRMCF312 comes with a small QFP100 pin package.
DataSheet4 U .com
Preliminary Information

1 Page

ページ 合計 : 8 ページ
[ IRMCF312.PDF ]


Link :



Dual Channel Sensorless Motor Control IC

International Rectifier
International Rectifier

Dual Channel Sensorless PM Motor Control IC

International Rectifier
International Rectifier    |   2020   |  メール    |   最新    |   Sitemap