|
|
Número de pieza | IL261 | |
Descripción | (IL260 / IL261) High Speed Five Channel Digital Couplers | |
Fabricantes | NVE | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IL261 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! www.DataSheet4U.com
IL260 IL261
High Speed Five Channel Digital Couplers
Functional Diagram
Features
• 3.3 V or 5 V CMOS/TTL Compatible
• 110 Mbps Data Rate
• 2500 VRMS Isolation (1 min)
• 2 ns Typical Pulse Width Distortion
• 4 ns Typical Propagation Delay Skew
• 10 ns Typical Propagation Delay
• 30 kV/ms Typical Transient Immunity
• 2 ns Channel to Channel Skew
• 0.3'' and 0.15'' 16–Pin SOIC Packages
• Extended Temperature Range (-40°C to +85°C)
• UL1577 Approval Pending
• IEC 61010-1 Approval Pending
Applications
• ADCs and DACs
• Multiplexed Data Transmission
• Data Interfaces
• Board-To-Board Communication
• Digital Noise Reduction
• Operator Interface
DataSheet4U•.cGormound Loop Elimination
• Peripheral Interfaces
• Parallel Bus
• Logic Level Shifting
• Plasma Displays
Description
DataShee
NVE's family of high-speed digital isolators are CMOS
devices created by integrating active circuitry and our GMR-
based and patented* IsoLoop® technology. The IL260 and
IL261 are five channel versions of the world's fastest digital
isolator with a 110 Mbps data rate. This device provides the
designer with the most compact isolated logic devices yet
available. All transmit and receive channels operate at 110
Mbps over the full temperature and supply voltage range. The
symmetric magnetic coupling barrier provides a typical
propagation delay of only 10 ns and a pulse width distortion
of 2 ns achieving the best specifications of any isolator device.
Typical transient immunity of 30 kV/µs is unsurpassed. High
channel density make them ideally suited to isolating multiple
ADCs and DACs, parallel buses and peripheral interfaces.
Performance is specified over the temperature range of -40°C
to +85°C without any derating. .
Isoloop® is a registered trademark of NVE Corporation.
DataShee*ISUtB4.S-UD. PS.ca-0toe0nm1t-nILu6m1b2e-rA5,,8Ja3n1u,4a2ry6;260,,320000,6517 and others.
NVE Corp., 11409 Valley View Road, Eden Prairie, MN 55344-3617, U.S.A.
Telephone: 952-829-9217, Fax 952-829-9189, www.isoloop.com
© 2005 NVE Corporation
1 page www.DataSheet4U.com
IL260 IL261
Notes: (Apply to both 3.3 V and 5 V specifications.)
1. Absolute Maximum ambient operating temperature means the device will not be damaged if operated under these conditions. It
does not guarantee performance.
2. PWD is defined as | tPHL– tPLH |. %PWD is equal to the PWD divided by the pulse width.
3. tPSK is equal to the magnitude of the worst case difference in tPHL and/or tPLH that will be seen between units at 25°C.
4. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. CML is the
maximum common mode input voltage that can be sustained while maintaining VO < 0.8 V. The common mode voltage slew
rates apply to both rising and falling common mode voltage edges.
5. Device is considered a two terminal device: pins 1-8 shorted and pins 9-16 shorted.
6. Dynamic power consumption numbers are calculated per channel and are supplied by the channel’s input side power supply.
et4U.com
DataSheet4U.com
DataShee
DataSheet4U.com
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet IL261.PDF ] |
Número de pieza | Descripción | Fabricantes |
IL260 | (IL260 / IL261) High Speed Five Channel Digital Couplers | NVE |
IL261 | (IL260 / IL261) High Speed Five Channel Digital Couplers | NVE |
IL2616 | Stereo | IK Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |