|
|
PDF HA-2841 Data sheet ( Hoja de datos )
| Número de pieza | HA-2841 | |
| Descripción | Wideband/ Fast Settling/ Unity Gain Stable/ Video Operational Amplifier | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HA-2841 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
HA-2841/883
July 1994
Wideband, Fast Settling, Unity Gain Stable,
Video Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1
• Low AC Variability Over Process and Temperature
• Low Supply Current. . . . . . . . . . . . . . . . . . . 11mA (Max)
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . 50MHz (Typ)
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . 290V/µs (Typ)
• Low Offset Voltage. . . . . . . . . . . . . . . . . . . . . 1mV (Typ)
• Full Power Bandwidth . . . . . . . . . . . . . . . . 4.6MHz (Typ)
• Low Differential Gain/Phase . . . . . . . 0.03%/0.03o (Typ)
Applications
• Pulse and Video Amplifiers
• Wideband Amplifiers
• Fast Sample and Hold Circuits
• Fast, Precise D/A Converters
The HA-2841/883 is a wideband, unity gain stable, operational
amplifier featuring a 50MHz unity gain bandwidth, and excellent
DC specifications. This amplifier’s performance is further
enhanced through stable operation down to closed loop gains of
+1, the inclusion of offset null controls, and by its excellent video
performance.
The capabilities of the HA-2841/883 are ideally suited for high
speed pulse and video amplifier circuits, where high slew rates
and wide bandwidth are required. Gain flatness of 0.05dB, com-
bined with differential gain and phase specifications of 0.03%,
and 0.03 degrees, respectively, make the HA-2841/883 ideal for
component and composite video applications.
A zener/nichrome based reference circuit, coupled with
advanced laser trimming techniques, yields a supply current with
a low temperature coefficient and low lot-to-lot variability. Tighter
ICC control translates to more consistent AC parameters ensur-
ing that units from each lot perform the same way, and easing the
task of designing systems for wide temperature ranges.
Ordering Information
• High Speed A/D Input Buffer
PART
NUMBER
TEMPERATURE
RANGE
PACKAGE
HA1-2841/883
-55oC to +125oC 14 Lead CerDIP
HA7-2841/883
-55oC to +125oC 8 Lead CerDIP
Pinouts
HA-2841/883
(CERDIP)
TOP VIEW
NC 1
NC 2
BAL 3
-IN 4
+IN 5
V- 6
NC 7
-
+
14 NC
13 NC
12 BAL
11 V+
10 OUT
9 NC
8 NC
HA-2841/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
+IN 3
V- 4
-
+
8 BAL
7 V+
6 OUT
5 NC
NOTE: (NC) No Connection pins may be tied to a ground plane for better isolation and heat dissipation.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com | Copyright © Intersil Corporation 1999
3-63
Spec Number 511087-883
File Number 3621.1
1 page  
Die Characteristics
DIE DIMENSIONS:
77 x 81 x 19 mils ± 1 mils
1960 x 2060 x 483µm ± 25.4µm
METALLIZATION:
Type: Al, 1% Cu
Thickness: 16kÅ ± 2kÅ
GLASSIVATION:
Type: Nitride over Silox
Silox Thickness: 12kÅ ± 2kÅ
Nitride thickness: 3.5kÅ ± 1kÅ
WORST CASE CURRENT DENSITY:
1.2 x 105 A/cm2 at 9.7mA
SUBSTRATE POTENTIAL (Powered Up): V-
TRANSISTOR COUNT: 43
PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
BAL
HA-2841/883
HA-2841/883
BAL
-IN V+
+IN
V-
OUT
Spec Number 511087-883
3-67
5 Page 
HA-2841
DESIGN INFORMATION (Continued)
The information contained in this section has been developed through characterization by Intersil Corporation and is for use as application
and design information only. No guarantee is implied.
Typical Performance Curves VSUPPLY = ±15V, AV = +1, RL = 1kΩ, CL ≤ 10pF, TA = +25oC, Unless Otherwise Specified.
POSITIVE OUTPUT SWING vs TEMPERATURE
12.5
±15V, 150Ω
±15V, 1kΩ
NEGATIVE OUTPUT SWING vs TEMPERATURE
0
±8V, 75Ω
±15V, 75Ω
±8V, 150Ω
10 -2.5
±15V, 75Ω
7.5
±8V, 1kΩ
±8V, 150Ω
5 ±8V, 75Ω
-5
-7.5
±8V, 1kΩ
±15V, 150Ω
2.5 -10
0
-60 -40 -20
0 +20 +40 +60 +80 +100 +120 +140
TEMPERATURE (oC)
MAXIMUM UNDISTORTED OUTPUT SWING vs FREQUENCY
25 VSUPPLY = ±15V
20
15
10 VSUPPLY = ±8V
5
0
1K
10K 100K 1M
10M
100M
FREQUENCY (Hz)
INTERMODULATION DISTORTION vs FREQUENCY
(TWO TONE)
-20
VO = 5VP-P
-30
-40
-50 VO = 2VP-P
VO = 1VP-P
-60 VO = 0.5VP-P
-70
-80
-90
500K
VO = 0.25VP-P
1M
FREQUENCY (Hz)
10M
±15V, 1kΩ
-12.5
-60 -40 -20
0 +20 +40 +60 +80 +100 +120 +140
TEMPERATURE (oC)
TOTAL HARMONIC DISTORTION vs FREQUENCY
-20
-30 VO = 10VP-P
-40
-50 VO = 1VP-P
-60 VO = 2VP-P
-70
-80
-90
100K
1M
FREQUENCY (Hz)
VO = 0.5VP-P
10M
DIFFERENTIAL GAIN vs LOAD RESISTANCE
0.16
0.14
0.12
0.10
0.08
0.06
VSUPPLY = ±8V
VSUPPLY = ±10V
VSUPPLY = ±15V
0.04
0.02
100 200 300 400 500 600 700 800 900 1000
LOAD RESISTANCE (Ω)
Spec Number 511087-883
3-73
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet HA-2841.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HA-2840 | Very High Slew Rate/ Wideband Operational Amplifier | Intersil Corporation |
| HA-2840 | 600MHz/ Very High Slew Rate Operational Amplifier |  Harris Corporation |
| HA-2840883 | Very High Slew Rate/ Wideband Operational Amplifier | Intersil Corporation |
| HA-2841 | Wideband/ Fast Settling/ Unity Gain Stable/ Video Operational Amplifier | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |