DataSheet.jp

E3V3 の電気的特性と機能

E3V3のメーカーはOmron Electronicsです、この部品の機能は「Bulti-in Amplifier Photoelectric Sensor」です。


製品の詳細 ( Datasheet PDF )

部品番号 E3V3
部品説明 Bulti-in Amplifier Photoelectric Sensor
メーカ Omron Electronics
ロゴ Omron Electronics ロゴ 




このページの下部にプレビューとE3V3ダウンロード(pdfファイル)リンクがあります。

Total 12 pages

No Preview Available !

E3V3 Datasheet, E3V3 PDF,ピン配置, 機能
www.DataSheet4U.com
R
Built-in Amplifier Photoelectric Sensor
Easy-to-use, Low-cost Photoelectric
Sensor
H Incorporating indicators that can be
clearly seen from a distance
H Conforms to EN and IEC standards
H Incorporating polarizing function, thus
accurately detecting shiny objects
H Resin-filled construction resists vibration
and ensures IP67 water-resistance
H 2 meter attached cable
E3V3
Ordering Information
Connections
Pre-leaded
Supply voltage
12 to 24 VDC
Sensing type Sensing range
Through-beam 7 m (23 ft)
DataSheet4U.com
Polarized
2 m (6.6 ft)
retroreflective
Diffuse
reflective
0.5 to 8 cm
(0.20 to 3.15 in)
70 cm (2.3 ft)
Output
Mode
Light-ON/Dark-
ON (selectable
by wiring)
Pigtail lead with 12 to 24 VDC
M8 connector
Through-beam
Polarized
retroreflective
Diffuse
reflective
7 m (23 ft)
2 m (6.6 ft)
Light-ON/Dark-
ON (selectable
by wiring)
0.5 to 8 cm
(0.20 to 3.15 in)
70 cm (2.3 ft)
Note: Mounting brackets are not provided with the E3V3. Order them separately below.
Type
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
H CONNECTOR CORDSETS
Description
Straight connector, 2 m (6.56 ft), 4-conductor cable
Straight connector, 5 m (16.4 ft), 4-conductor cable
Extension cable, 2 m (6.56 ft), connectors at both ends
Extension cable, 5 m (16.4 ft), connectors at both ends
Part number
XS3F-M421-402-R
XS3F-M421-405-R
XS3W-M421-402-R
XS3W-M421-405-R
Part number
E3V3-T61
E3V3-T81
E3V3-R61
E3V3-R81
E3V3-D61
E3V3-D81
E3V3-D62
E3V3-D82
E3V3-T61-M3J
E3V3-T81-M3J
E3V3-R61-M3J
E3V3-R81-M3J
E3V3-D61-M3J
E3V3-D81-M3J
E3V3-D62-M3J
E3V3-D82-M3J
DataShee
DataSheet4U.com
DataSheet4 U .com

1 Page





E3V3 pdf, ピン配列
www.DataSheet4U.com
E3V3
E3V3
et4U.com
H RATINGS/CHARACTERISTICS
Part number
Sensing method
Supply voltage
Current consumption
Detection distance
Standard detectable object
Directional angle
Differential travel
Response time
Control output
Ambient
illumination
Incandescent
lamp
Sunlight
Ambient
Operating
temperature Storage
Relative
humidity
Operating
Storage
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Enclosure
rating
IEC
E3V3-T61/-T81
E3V3-R61/-R81
E3V3-D61/-D81
E3V3-D62/-D82
Through-beam
Retroreflective
(with MSR function)
Diffuse reflective
12 to 24 VDC ±10%, ripple (p-p): 10% max.
50 mA max.
40 mA max.
7m
0.1 to 2 m (with E39-R1) 0.5 to 8 cm
70 cm
Opaque object: 7 mm Opaque object: 30 mm 10 x 10 cm white
min. (0.28 in)
min. (1.18 in)
paper
20 x 20 cm white paper
3° to 15°
Receiver/Emitter: 2° to
10°
Reflector: 30° min.
---
--- 20% max. of detection distance
1 ms max. for both operation and release
100 mA max. at 30 VDC, open collector output (residual voltage: 1 V max.)
Illumination on optical spot: 3,000 ȏx max.
Illumination on optical spot: 10,000 ȏx max.
–25°C to 55°C (–13°F to 131°F) with no icing
–40°C to 70°C (–40°F to 158°F)
35% to 85%
35% to 95%
20 Mmin. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min
10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z directions
500 m/s2 (approx. 50G) 3 times each in X, Y, and Z directions
IP67
DataSheet4U.com
DataShee
DataSheet4U.com
DataSheet4 U .com
3


3Pages


E3V3 電子部品, 半導体
www.DataSheet4U.com
E3V3
E3V3
Output
Configuration
PNP
(E3V3-j8j)
Mode
Switch
Light-ON
Connection
Method
Connect the pink
cord to the brown
cord. (See Note.)
Output Circuits
Operation
indicator
(Orange)
Stability
indicator
(Green)
Main
circuit
Brown
12 to 24 VDC Connector Pin
Arrangement
Black
100 mA Load
Blue max.
(relay)
0V
Pink
Operating selection
Dark-ON
Connect the pink
cord to the blue
cord or
disconnect the
pink cord from the
blue cord
(See Note.)
Operation
indicator
(Orange)
Stability
indicator
(Green)
Main
circuit
Brown
12 to 24 VDC
Black
100 mA
Blue max.
Load
(relay)
0V
Pink
Operating selection
Connector Pin
Arrangement
Note: The E3V3 Model with a junction connector has a white cord instead of a pink cord.
Emitter (NPN/PNP)
et4U.com
Emitter
indicator
(orange)
Main
circuit
Brown
Blue
12 to
24 VDC
Connector Pin Arrangement
DataSheet4U.com
H TIMING CHARTS
Output
Mode
Configuration Switch
Connection Method Timing Chart
NPN
(E3V3-j6j)
Light-ON
Dark-ON
Connect the pink
cord to the brown
cord. (See Note.)
Connect the pink
cord to the blue cord
or disconnect the
pink cord from the
blue cord.
(See Note.)
Light received
Light not received
Light indicator
(Orange)
ON
OFF
Output
transistor
ON
OFF
Load
(relay)
Operate
Release
Light received
Light not received
Light indicator
(Orange)
ON
OFF
Output
transistor
ON
OFF
Load
(relay)
Operate
Release
(Between brown and black)
(Between brown and black)
PNP
(E3V3-j8j)
Light-ON
Connect the pink
cord to the brown
cord. (See Note.)
Light received
Light not received
Light indicator
(Orange)
ON
OFF
Output
transistor
ON
OFF
Load
(relay)
Operate
Release
(Between blue and black)
Dark-ON
Connect the pink
cord to the blue cord
or disconnect the
pink cord from the
blue cord.
Light received
Light not received
Light indicator
(Orange)
ON
OFF
Output
transistor
ON
OFF
(See Note.)
Load
Operate
DataSheet4U.com
(relay)
Release
(Between blue and black)
Note: The E3V3 Model with a junction connector has a white cord instead of a pink cord.
6
DataSheet4 U .com
DataShee

6 Page



ページ 合計 : 12 ページ
 
PDF
ダウンロード
[ E3V3 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
E3V3

Bulti-in Amplifier Photoelectric Sensor

Omron Electronics
Omron Electronics
E3VEGW

(E3VxxW) BI-Color Indicator Lamps

eLED
eLED
E3VEYW

(E3VxxW) BI-Color Indicator Lamps

eLED
eLED
E3VGYW

(E3VxxW) BI-Color Indicator Lamps

eLED
eLED


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap