DataSheet.jp

OPB89x の電気的特性と機能

OPB89xのメーカーはOptek Technologyです、この部品の機能は「(OPBxxx) Slotted Optical Switches」です。


製品の詳細 ( Datasheet PDF )

部品番号 OPB89x
部品説明 (OPBxxx) Slotted Optical Switches
メーカ Optek Technology
ロゴ Optek Technology ロゴ 




このページの下部にプレビューとOPB89xダウンロード(pdfファイル)リンクがあります。
Total 10 pages

No Preview Available !

OPB89x Datasheet, OPB89x PDF,ピン配置, 機能
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Features:
0.125” (3.175 mm) slot width
Choice of aperture (0.050” or 0.010” width)
Choice of opaque or IR transmissive shell material
Choice of mounting configurations
Choice of lead spacing or wires
Product Photo Here
Description:
Each device in this series provides the flexibility of a custom device from a standard product line. Building from a
standard housing with a 0.125” (3.175 mm) wide slot, a user can choose aperture width, opaque or IR
transmissive housing shell material, PCBoard lead spacing or wires and mounting tab configuration.
Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and
near-infrared light. Discrete shells exposed on the parallel faces inside each device’s throat are made from either
IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture
openings (for applications that require maximum protection against ambient light).
Phototransistor sensor devices include the OPB859, PB360, OPB370, OPB380, OPB390, OPB860 and OPB870,
while the OPB355 provides a photodiode sensor. The photodiode sensor has a lower and more linear output-
versus-light input than the phototransistor models.
The OPB355, OPB360, OPB370, OPB859, OPBD8a6ta0SahnedeOt4PUB.c8o7m0 are designed for direct connection to through
hole PCBoards. The OPB380, OPB390, OPB880 and OPB890 have 26 AWG wires connected directly to the
device for remote sensing applications.
DataShee
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Non-contact object sensing
Assembly line automation
Machine automation
Equipment safety
Machine safety
OPB360, OPB370, OPB380, OPB390
OPB859
OPB860, OPB870, OPB880, OPB890
13
OPB355
13
24
24
RoHS
DataSheet4U.com
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics.
Applies to: OPB360, OPB370, OPB380, OPB390
and OPB860, OPB870, OPB880, OPB890.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 02/06
Page 1 of 10
DataSheet4 U .com

1 Page





OPB89x pdf, ピン配列
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Optek Assembly
Part Number Guide — OPB859
OPB 8 X X
Photodiode Output Family
Emitter Aperture: 0.050” (12.70 mm)
Sensor Aperture: 0.050” (12.70 mm)
Mounting Configuration:
T — Two mounting tabs
Optek Assembly
Phototransistor Output Family
et4U.com
Discrete Shell Material:
6 — Base mount IR transmissive
Plastic discrete shell
PCMountable leads
7 — Base mount opaque
Plastic discrete shell
PCMountable leads
Part Number Guide — OPB860 / OPB870
OPB 8 X X X X X
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Electrical Specification Variations:
0 = Electrical Parameter A (lead spacing = 0.320”)
1 = Electrical Parameter B (lead spacing = 0.320”)
2
5
=
=
EElleeccttrriiccaallDPPaaarrtaaammSeehtteeerreCAt4((llUeeaa.dcdosspmpaacciinngg
=
=
0.320”)
0.220”)
6 = Electrical Parameter B (lead spacing = 0.220”)
7 = Electrical Parameter C (lead spacing = 0.220”)
Mounting Configurations:
N — No mounting tabs
L — Emitter side mounting tab only
T — Two mounting tabs
P — Phototransistor side mounting side
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
DataShee
Part Number Guide — OPB880 / OPB890
OPB 8 X X X X X
Optek Assembly
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Phototransistor Output Family
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Discrete Shell Material:
8 — Base mount IR transmissive
Plastic discrete shell
PCMountable leads
9 — Base mount opaque
Plastic discrete shell
PCMountable leads
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Mounting configurations:
N — No mounting tabs
L — Emitter side mounting tab only
T — Two mounting tabs
P — Phototransistor side mounting side
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
Wires = 26AWG—24” Long
DataSheet4U.com
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 02/06
Page 3 of 10
DataSheet4 U .com


3Pages


OPB89x 電子部品, 半導体
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
et4U.com
Input Transistor/Diode (See OP240 for additional information—for reference only)
VF Forward Voltage
- 1.3 1.8
V
IF = 20 mA
IR Reverse Current
- - 100 µA VR = 2 V
Output Diode — OPB355 (See OPB950 for additional information — for reference only)
VBR Reverse Diode Breakdown Voltage 60 - - V IR = 100 µA, IF = 0, EE = 0
VFD Forward Voltage Photodiode
- - 1.2 V IF = 1 mA, IF = 0, EE = 0
ID Reverse Dark Current
- - 60 nA VR = 30 V, EE = 0, IF = 0
Output Transistor (See OP550 for additional information—for reference only)
V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA
V(BR)ECO Emitter-Collector Breakdown Voltage 5
-
-
V IE = 100 µA
ICEO Collector-Emitter Dark Current
- - 100 nA VCE = 10 V, IF = 0, EE = 0
Coupled
IL
VCE(SAT)
IC(ON)
On-State Collector Current
OPB355 (L, N, P, T)
10 - 200
Collector-Emitter Saturation Voltage
OPB859
OPB860/870/865/875 (Para. A)
OPB861/871/866/876 (Para. B)
OPB862/872/867/877 (Para. C)
OPB880/890/ (Para. A)
OPB881/891 (Para. B)
OPB882/892 (Para. C)
DataSheet4U.c00o..44m
-
-
0.4
0.6
0.4
0.4
0.6
On-State Collector Current
OPB36X, OPB37X (T, N, L, P 11)
OPB36X, OPB37X (T, N, L, P 51)
OPB36X, OPB37X (T, N, L, P 55)
OPB38X, OPB39X (T, N, L, P 11)
OPB38X, OPB39X (T, N, L, P 51)
OPB38X, OPB39X (T, N, L, P 55)
OPB859
OPB860/870/865/875 (Para. A)
OPB861/871/866/876 (Para. B)
OPB862/872/867/877 (Para. C)
OPB880/890/ (Para. A)
OPB881/891 (Para. B)
OPB882/892 (Para. C
1
2.5
3.5
1
2.5
3.5
250
500
1000
1800
500
1000
1800
-
5
10
14
5
10
14
-
-
-
-
-
-
-
µa VR = 5 V, IF = 40 mA
IC = 125 µA, IF = 20 mA
IC = 400 µA, IF = 20 mA
IC = 800 µA, IF = 20 mA
V IC = 1800 µA, IF = 20 mA
IC = 400 µA, IF = 20 mA
IC = 800 µA, IF = 20 mA
IC = 1800 µA, IF = 20 mA
mA
mA
VCE = 0.4 V, IF = 20 mA
VCE = 0.4 V, IF = 20 mA
mA VCE = 0.4 V, IF = 20 mA
mA VCE = 0.4 V, IF = 20 mA
mA VCE = 0.4 V, IF = 20 mA
mA VCE = 0.4 V, IF = 20 mA
µA VCE = 10 V, IF = 20 mA
µA VCE = 10 V, IF = 20 mA
µA VCE = 5 V, IF = 10 mA
µA
µA
µA
µA
VCE = 0.6 V, IF = 20 mA
VCE = 10 V, IF = 20 mA
VCE = 5 V, IF = 10 mA
VCE = 0.6 V, IF = 20 mA
DataShee
DataSheet4U.com
Issue A 02/06
Page 6 of 10
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
DataSheet4 U .com

6 Page



ページ 合計 : 10 ページ
 
PDF
ダウンロード
[ OPB89x データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
OPB89x

(OPBxxx) Slotted Optical Switches

Optek Technology
Optek Technology


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap