|
|
PDF 3DLABS Data sheet ( Hoja de datos )
| Número de pieza | 3DLABS | |
| Descripción | Wildcat 4110 Graphics Guide | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 3DLABS (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
'ODEV :LOGFDW *UDSKLFV
8VHU·V *XLGH
DataSheet4U.com
DataShee
'RFXPHQW 1XPEHU '$9%
DataSheet4U.com
DataSheet4 U .com
1 page  
www.DataSheet4U.com
et4U.com
v
About This Document
The 3Dlabs Wildcat 4110 Graphics User’s Guide contains information on the setup and use of the
Wildcat 4110 and Wildcat 4110 VIO video cards, as well as troubleshooting information, connections,
and specifications.
NOTE
References to Wildcat 4110 in this document cover both Wildcat 4110 and Wildcat 4110
VIO unless otherwise noted.
If you purchased this card as part of a system, the card was factory installed and configured in your
system prior to shipment. This document provides instructions for setting your display parameters and
installing the video drivers and hardware in case you bought the card as part of an upgrade or add-on
purchase.
The document is organized as follows:
♦ Chapter 1, “Introduction,” provides an overview of the Wildcat 4110 video card, a list of features,
and a brief description of the external ports.
♦ Chapter 2, “Setup,” provides step-by-step instructions for installing the Wildcat 4110 hardware
and related software, and connecting the monitor and stereo display device.
♦ Chapter 3, “Using the Video Card,” provides instructions for configuring the video display and
enabling the stereo display. DataSheet4U.com
♦ Chapter 4, “Troubleshooting,” describes common problems and solutions, and instructions for
obtaining a usable video resolution, reinstalling the video driver, and how to get help.
♦ Appendix A, “Technical Information,” provides general, functional, and performance
specifications for the Wildcat 4110, and describes the ports and connectors.
Getting Support
When you need software support or hardware maintenance, contact your system vendor.
For the latest Wildcat news and product information, visit http://www.3dlabs.com on the World Wide
Web.
DataShee
DataSheet4U.com
DataSheet4 U .com
5 Page 
www.DataSheet4U.com
et4U.com
5
2 Setup
This chapter provides step-by-step instructions for installing a Wildcat 4110 video card and related
software, and for connecting the monitor and stereo display device to the card. The instructions in this
chapter are necessary only if you purchased your video card separately, or if you must replace your
video card or reinstall its driver software.
NOTE
References to Wildcat 4110 cover both Wildcat 4110 and Wildcat 4110 VIO unless
otherwise noted.
Preparing for Installation
Make sure your system has the following items:
♦ Pentium II or greater processor
♦ Microsoft Windows NT 4.0 with Service Pack 4 or later
♦ Accelerated Graphics Port (AGP) Pro50 or AGP Pro expansion slot
NOTE
Wildcat 4110 cannot plug into a standard AGP slot.
♦ An open Peripheral Component Interconnect (PCI) slot adjacent to the AGP Pro50 or AGP Pro
slot to provide adequate cooling DfoarttahSe hWeieldt4cUat.c4o11m0 video card
♦ A minimum of 32 MB DRAM system memory; 64 MB DRAM system memory is recommended
for optimum performance
♦ Industry-standard, multiple-frequency monitor (Wildcat 4110 and Wildcat 4110 VIO) or
DVI-compliant digital display device (Wildcat 4110 only)
Make sure you have the following items:
♦ Wildcat 4110 or Wildcat 4110 VIO video card
♦ Delivery media with the Wildcat 4110 video display driver
♦ Flat-head or Phillips screwdriver
♦ Monitor cable supplied with your computer or with the monitor
♦ Grounding wrist strap
Static electricity can damage the components inside a computer or on a printed circuit card. To reduce
the possibility of electrostatic discharge:
♦ Turn off power to the computer.
♦ Touch the metal chassis of the computer to drain off static electricity before touching the card.
DataShee
DataSheet4U.com
DataSheet4 U .com
11 Page | ||
| Páginas | Total 28 Páginas | |
| PDF Descargar | [ Datasheet 3DLABS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 3DLABS | Wildcat 4110 Graphics Guide | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |