|
|
PDF HW-300A Data sheet ( Hoja de datos )
| Número de pieza | HW-300A | |
| Descripción | High-sensitivity InSb Hall element | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HW-300A (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
InSb Hall Element
HW-300A
•High-sensitivity InSb Hall element.
•DIP package.
•Shipped in bulk (500pcs per pack).
Note : It is requested to read and accept "IMPORTANT NOTICE".
Please be aware that AKE products are not intended for use in life
support equipment, devices, or systems. Use of AKE products in such
applications requires the advance written approval of the appropriate
AKE officer.
Certain applications using semiconductor devices may involve potential
risks of personal injury, property damage, or loss of life. In order to
minimize these risks, adequate design and operating safeguards
should be provided by the customer to minimize inherent or procedural
hazards. Inclusion of AKE products in such applications is understood to
be fully at the risk of the customer using AKE devices or systems.
•Absolute Maximum Ratings
Item
Symbol
Limit
Unit
Max. Input Current Ic Const. Current Drive
20
mA
Operating Temp. Range Topr.
–40 to +110
˚C
Storage Temp. Range Tstg.
–40 to +125
˚C
•Classification of Output Hall Voltage (VH)
•Electrical Characteristics(Ta=25˚C)
Item
Symbol
Conditions
Min.
Output Hall Voltage VH
Const. Voltage Drive
B=50mT, Vc=IV
122
Input Resistance Rin B=0mT, Ic=0.1mA
240
Output Resistance Rout B=0mT, Ic=0.1mA
Offset Voltage Vos B=0mT, Vc=IV
240
–7
Temp. Coefficient of VH VH B=50mT, Ic=5mA
Typ.
–1.8
Rank
VH [ mV ]
Conditions
A 122 to 150
Max. Unit
B 144 to 174
320 mV
C 168 to 204
B=50mT, Vc=IV
D 196 to 236 Constant Voltage Drive
E 228 to 274
550 F 266 to 320
Note : When ordering, specify 3-rank or wider range(e·g·,BCD).
55D0ataSheet4U.•cInopmut Current Derating Curve
+7 mV
%/˚C
20
Input Resistance
Rin : 240 to 550
Temp. Coefficient of Rin Rin B=0mT, Ic=0.1mA
–1.8
Dielectric Strength
100V D.C
1.0
Notes : 1. VH = VHM – Vos (VHM:meter indication)
2.
VH =
1
VH (T1)
X
VH (T3) – VH (T2)
(T3 – T2)
X 100
3.
Rin =
1
Rin (T1)
X
Rin (T3)
(T3
–
–
Rin (T2)
T2)
X
100
T1 = 20˚C, T2 = 0˚C, T3 = 40˚C
•Dimensional Drawing (mm)
2.4±0.1
1.5
0.4
12
0.7
0.4
%/˚C
M
10
0
– 40 – 20
0 20 40 60 80 100 120
Ambient Temperature.(˚C)
Note : Rin of Hall element decreases rapidly as ambient temperature
increases. Ensure compliance with input current derating curve envelope,
throughout the operating temperature range.
•Input Voltage Derating Curve
Input Resistance
2.0 Rin : 240 to 550
8˚
5˚
1.0
DataSheet4U.com
43
8˚
5˚
DataSheet4 U .com
Pinning
0.15
Input
1(±)
3
Output 2
4(±)
0
– 40 – 20
0 20 40 60 80 100 120
Ambient Temperature.(˚C)
Note : For constant-voltage drive, stay within this input voltage derating
curve envelope.
23 DataSheet4U.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet HW-300A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HW-300A | High-sensitivity InSb Hall element | ETC |
| HW-300B | Shipped in bulk | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |