DataSheet.jp

USP-225 の電気的特性と機能

USP-225のメーカーはTotal Power Internationalです、この部品の機能は「225W Single Output with PFC Function」です。


製品の詳細 ( Datasheet PDF )

部品番号 USP-225
部品説明 225W Single Output with PFC Function
メーカ Total Power International
ロゴ Total Power International ロゴ 




このページの下部にプレビューとUSP-225ダウンロード(pdfファイル)リンクがあります。

Total 2 pages

No Preview Available !

USP-225 Datasheet, USP-225 PDF,ピン配置, 機能
www.DataSheet4U.com
TOTAL POWER INT'L
225W Single Output with PFC Function
USP-225 series
Features :
Universal AC input / Full range
Built in active PFC circuit compliance to EN61000-3-2
Protections:Short circuit/Over load/Over voltage/Over temperature
Free air convection for 150W and forced air convection for 225W
3
High power density 4.7w/in
Active AC surge current limiting
U-bracket low profile:38mm
3 years warranty
SPECIFICATION
MODEL
USP-225-3.3
USP-225-5
USP-225-12
USP-225-15
USP-225-24
USP-225-48
OUTPUT
DC VOLTAGE
3.3V 5V
RATED CURRENT
40A
40A
CURRENT RANGE
0 ~ 40A
0 ~ 40A
RATED POWER
132W
200W
RIPPLE & NOISE (max.) Note.2 100mVp-p
100mVp-p
VOLTAGE ADJ. RANGE
2.97 ~ 3.6V
4.5 ~ 5.5V
VOLTAGE TOLERANCE Note.3 2.0%
2.0%
LINE REGULATION
0.5%
0.5%
LOAD REGULATION
1.0%
1.0%
SETUP, RISE, HOLD TIME 500ms, 30ms, 22ms/230VAC
12V 15V
18.7A
15A
0 ~ 18.7A
0 ~ 15A
224.4W
225W
100mVp-p
100mVp-p
10.8 ~ 13.2V
13.5 ~ 16.5V
2.0% 2.0%
0.5% 0.5%
1.0% 1.0%
1200ms, 30ms, 22ms/115VAC at full load
24V
9.4A
0 ~ 9.4A
225.6W
150mVp-p
21.6 ~ 26.4V
2.0%
0.5%
1.0%
48V
4.7A
0 ~ 4.7A
225.6W
250mVp-p
43.2 ~ 52.8V
2.0%
0.5%
1.0%
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
POWER FACTOR
47 ~ 63Hz
PF>0.93/230VAC
DataSheet4U.com
PF>0.97/115VAC at full load
INPUT
EFFICIENCY (Typ.)
72%
77%
85%
84%
87%
86%
AC CURRENT
115VAC 2.2A
3.3A
230VAC 1.1A
1.6A
INRUSH CURRENT (max.) 20A/115VAC 30A/230VAC
LEAKAGE CURRENT
<3.5mA / 240VAC
OVER LOAD
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
3.6 ~ 4.4V
5.5 ~ 7.4V
13.2 ~ 16.3V
16.5 ~ 20.2V
26.4 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
95 5 (RTH2 : Detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
52.8 ~ 64.8V
ENVIRONMENT
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
-20 ~ +65 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950, TUV EN60950 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY &
EMC
(Note 4)
OTHERS
NOTE
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A
MTBF
220K hrs min. MIL-HDBK-217F (25 )
DIMENSION
202*101.5*38mm (L*W*H)
PACKING
0.85Kg; 16pcs/13.6Kg/0.76CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
DataShee
DataSheet4U.com
DataSheet4 U .com
DataSheet4U.com

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ USP-225 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
USP-225

225W Single Output with PFC Function

Total Power International
Total Power International


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap