|
|
PDF ISM91 Data sheet ( Hoja de datos )
| Número de pieza | ISM91 | |
| Descripción | (ISM91 / ISM94) SMD Oscillator | |
| Fabricantes | ILSI America | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISM91 (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
SMD Oscillator, TTL / HC-MOS
Ceramic Package, 5 mm x 7 mm
ISM91 / ISM94 Series
Frequency
Output Level
Level
Duty Cycle
Rise / Fall Time
Output Load
Frequency Stability
Start-up Time
Enable / Disable Time
Supply Voltage
Current
10 KHz to 170.000 MHz
TTL HC-MOS
‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min.
‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min.
Specify 50% ± 10% or ± 5% See Table
5 nS Max. @ Vcc = +3.3 VDC, 10 nS Max. @ Vcc = +5 VDC ***
Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL
See Table
See Frequency Stability Table
(Includes room temperature tolerance and stability over operating temperature)
10 mS Max.
100 nS Max.
See Input Voltage Table, tolerance ±5 %
70 mA Max. ***
Temperature
Operating
See Operating Temperature Table
Storage
-55° C to +125° C
Environmental / Tape and Reel
See Appendix B for Environmental information, Appendix C for Tape and Reel information
Package Information
MSL = N.A., Termination = e4
Programmable version is available for quick delivery, part number ISM91P.
Tri-State Function
Pin 1 Open
Enable
Pin 1 ≥ 70% Vdd
Enable
Pin 1 ≤ 30% Vdd
Disable
H = Height
ISM91
1.8 mm Max.
ISM94 *
1.4 mm Max.
* Not available at all frequencies
Part Number Guide
Package
Input
ISM91 -
(1.8 mm H)
Voltage
5 = 5.0 V
3 = 3.3 V
7 = 3.0 V
ISM94 -
(1.4 mm H)
2 = 2.7 V
6 = 2.5 V
1 = 1.8 V*
Sample Part Number:
Operating
Symmetry
Temperature
1 = 0° C to +70° C
6 = -10° C to +70° C
(Duty Cycle)
5 = 45 / 55 Max.
6 = 40 / 60 Max.
3 = -20° C to +70° C
4 = -30° C to +75° C
2 = -40° C to +85° C
ISM91 - 3251BH - 20.000
Output
Stability
1 = 10TTL / 15 pF HC-MOS
3 = 15 pF HC-MOS
6 = 30 pF
5 = 50 pF HC-MOS (<40 MHz)
4 = AC-MOS
(in ppm)
**E = ±10
**D = ±15
F = ±20
A = ±25
B = ±50
C = ±100
Enable /
Disable
H = Enable
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and Gnd (pin 2) to minimize power supply noise.
* Not available at all frequencies. ** Not available for all temperature ranges. *** Frequency, supply, and load related parameters.
Frequency
- 20.000 MHz
03/06
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
Specifications subject to change without notice
D7
DataSheet4 U .com
www.DataSheet4U.com
www.DataSheet4U.com
1 page | ||
| Páginas | Total 1 Páginas | |
| PDF Descargar | [ Datasheet ISM91.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISM91 | (ISM91 / ISM94) SMD Oscillator | ILSI America |
| ISM91-xxxx | (ISM91 / ISM94) SMD Oscillator | ILSI America |
| ISM94 | (ISM91 / ISM94) SMD Oscillator | ILSI America |
| ISM94-xxxx | (ISM91 / ISM94) SMD Oscillator | ILSI America |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |