HCPL5400 Datasheet PDF - Agilent(Hewlett-Packard)
| Part Number | HCPL5400 | |
| Description | Hermetically Sealed/ Very High Speed/ Logic Gate Optocouplers | |
| Manufacturers | Agilent(Hewlett-Packard) | |
| Logo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
|
There is a preview and HCPL5400 download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
H
Hermetically Sealed,
Very High Speed,
Logic Gate Optocouplers
Technical Data
HCPL-540X* HCPL-643X
5962-89570 5962-89571
HCPL-543X
*See matrix for available extensions.
Features
• Dual Marked with Device
Part Number and DESC
Drawing Number
• Manufactured and Tested on
a MIL-PRF-38534 Certified
Line
• QML-38534, Class H and K
• Three Hermetically Sealed
Package Configurations
• Performance Guaranteed
over -55°C to +125°C
• High Speed: 40 M bit/s
• High Common Mode
Rejection 500 V/µs
Guaranteed
• 1500 Vdc Withstand Test
Voltage
• Active (Totem Pole) Outputs
• Three Stage Output Available
• High Radiation Immunity
• HCPL-2400/30 Function
Compatibility
• Reliability Data
• Compatible with TTL, STTL,
LSTTL, and HCMOS Logic
Families
Applications
• Military and Space
• High Reliability Systems
• Transportation, Medical, and
Life Critical Systems
• Isolation of High Speed
Logic Systems
• Computer-Peripheral
Interfaces
• Switching Power Supplies
• Isolated Bus Driver
(Networking Applications)-
(5400/1 Only)
• Pulse Transformer
Replacement
• Ground Loop Elimination
• Harsh Industrial
Environments
• High Speed Disk Drive I/O
• Digital Isolation for A/D,
D/A Conversion
Description
These units are single and dual
channel, hermetically sealed
optocouplers. The products are
capable of operation and storage
over the full military temperature
range and can be purchased as
either standard product or with
full MIL-PRF-38534 Class Level
H or K testing or from the
appropriate DESC Drawing. All
devices are manufactured and
tested on a MIL-PRF-38534
certified line and are included in
the DESC Qualified Manufac-
turers List QML-38534 for Hybrid
Microcircuits.
Each channel contains an AlGaAs
light emitting diode which is
optically coupled to an integrated
high gain photon detector. This
combination results in very high
Truth Tables
(Positive Logic)
Multichannel Devices
Input
Output
On (H)
H
Off (L)
L
Single Channel DIP
Input Enable
On (H)
L
Off (L)
L
On (H)
H
Off (L)
H
Output
L
H
Z
Z
Functional Diagram
Multiple Channel Devices
Available
VCC
VE
VO
GND
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-524
5965-3004E
|
| |
 
Absolute Maximum Ratings
(No derating required up to +125°C)
Storage Temperature Range, TS .................................. -65°C to +150°C
Operating Temperature, TA ......................................... -55°C to +125°C
Case Temperature, TC ................................................................ +170°C
Junction Temperature, TJ .......................................................... +175°C
Lead Solder Temperature .............................................. 260°C for 10 s
Average Forward Current, IF AVG (each channel) ........................ 10 mA
Peak Input Current, IF PK (each channel) ............................... 20 mA[1]
Reverse Input Voltage, VR (each channel) ....................................... 3 V
Supply Voltage, VCC ............................................. 0.0 V min., 7.0 V max.
Average Output Current, IO ............................ -25 mA min., 25 mA max.
(each channel)
Output Voltage, VO (each channel) ..................... -0.5 V min., 10 V max.
Output Power Dissipation, PO (each channel) ........................... 130 mW
Package Power Dissipation, PD (each channel) ......................... 200 mW
Single Channel Product Only
Three State Enable Voltage, VE ........................... -0.5 V min., 10 V max.
8 Pin Ceramic DIP Single Channel Schematic
ANODE
CATHODE
VE
VO
Note enable pin 7. An external 0.01 µF to 0.1 µF bypass capacitor must be connected
between VCC and ground for each package type.
ESD Classification
(MIL-STD-883, Method 3015)
HCPL-5400/01 .................................................................. (∆∆ ), Class 2
HCPL-5430/31 and HCPL-6430/31 ................................. (Dot), Class 3
Recommended Operating Conditions
Parameter
Symbol Min.
Input Current (High)
Supply Voltage, Output
Input Voltage (Low)
Fan Out (Each Channel)
IF(ON)
VCC
VF(OFF)
N
6
4.75
–
–
Max.
10
5.25
0.7
5
Units
mA
V
V
TTL Loads
Single Channel Product Only
High Level Enable Voltage
Low Level Enable Voltage
VEH
VEL
2.0 VCC
0 0.8
V
V
1-528
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HCPL5400 electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HCPL5400.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HCPL5400 | The function is Hermetically Sealed/ Very High Speed/ Logic Gate Optocouplers. Agilent(Hewlett-Packard) | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HCPL
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||