|
|
Número de pieza | HFE4020-313 | |
Descripción | Fiber Optic LED | |
Fabricantes | HoneyWell | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HFE4020-313 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! www.DataSheet4U.com
HFE4020-313/XXX
Fiber Optic LED
FEATURES
• Power out designed for drive currents between 10
and 100 mA
• Wave solderable
• Optimized for linear optical output with drive
currents between 10 mA and 100 mA
• High speed: 85 MHz
• Mounting options
SMA single hole
ST single hole
SMA PCB
ST PCB
SMA 4 hole
DESCRIPTION
The HFE4020-313/XXX is a high radiance GaAlAs
850 nanometer LED optimized for coupling into small
fiber core diameters at a forward current of 10 to 100 mA.
The patented "Caprock"™ LED chip combines high power
coupling with wide bandwidth. The peak wavelength is
matched for use with Honeywell silicon fiber optic
detectors and receivers. When the HFE4020-313/XXX is
used at elevated temperatures, thermal resistance must
be taken into consideration.
APPLICATION
The HFE4020-313/XXX is a high radiance LED packaged
in a fiber optic connector that aligns the optical axis of the
base component to the axis of the optical fiber. Data
rates can vary from DC to above 85 MHz depending
upon component application. The LED converts electrical
current into optical power that can be used in fiber optic
communications. As the current varies (typically from 10
to 100 mA), the light intensity increases proportionally.
The HFE4020-313/XXX LED is designed to give high
fiber coupled power (high radiance into a standard fiber
optic cable). In order to enhance the light being sent into
a fiber optic cable, a 0.30 mm diameter glass microlens is
placed over the "Caprock"™ junction. The microlens
collimates the light, increasing the intensity directed
toward a fiber optic cable. This creates a "SWEET
SPOT" of power, allowing greater power to be launched
into standard fiber optic cables.
www.DataSheet4U.com
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
217
1 page www.DataSheet4U.com
European Connectorized
LEDs/Transmitters
Honeywell LED/transmitter components are available in the following connector styles. Each style has a three-digit reference
used in the order guides.
SMA SINGLE HOLE MOUNTING (REF.: AAA)
ST SINGLE HOLE MOUNTING (REF.: BAA)
SMA PCB MOUNTING (REF.: ABA)
www.DataSheet4U.com
Honeywell Optoelectronics reserves the right to make
changes at any time in order to improve design and
supply the best products possible.
203
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HFE4020-313.PDF ] |
Número de pieza | Descripción | Fabricantes |
HFE4020-313 | Fiber Optic LED | HoneyWell |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |