DataSheet.jp

BT-136 の電気的特性と機能

BT-136のメーカーはETCです、この部品の機能は「BT136」です。


製品の詳細 ( Datasheet PDF )

部品番号 BT-136
部品説明 BT136
メーカ ETC
ロゴ ETC ロゴ 




このページの下部にプレビューとBT-136ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

BT-136 Datasheet, BT-136 PDF,ピン配置, 機能
Philips Semiconductors
Triacs
Product specification
BT136 series
GENERAL DESCRIPTION
Glass passivated triacs in a plastic
envelope, intended for use in
applications
requiring
high
bidirectional transient and blocking
voltage capability and high thermal
cycling performance. Typical
applications include motor control,
industrial and domestic lighting,
heating and static switching.
www.DataSheet4U.com
QUICK REFERENCE DATA
SYMBOL PARAMETER
MAX. MAX. MAX. UNIT
VDRM
IT(RMS)
ITSM
BT136-
BT136-
BT136-
Repetitive peak off-state
voltages
RMS on-state current
Non-repetitive peak on-state
current
500
500F
500G
500
4
25
600
600F
600G
600
4
25
800
800F
800G
800
4
25
V
A
A
PINNING - TO220AB
PIN DESCRIPTION
1 main terminal 1
2 main terminal 2
3 gate
tab main terminal 2
PIN CONFIGURATION
tab
1 23
SYMBOL
T2
T1
G
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
VDRM
IT(RMS)
ITSM
I2t
dIT/dt
IGM
VGM
PGM
PG(AV)
Tstg
Tj
Repetitive peak off-state
voltages
RMS on-state current
Non-repetitive peak
on-state current
I2t for fusing
Repetitive rate of rise of
on-state current after
triggering
Peak gate current
Peak gate voltage
Peak gate power
Average gate power
Storage temperature
Operating junction
temperature
full sine wave; Tmb 107 ˚C
full sine wave; Tj = 25 ˚C prior to
surge
t = 20 ms
t = 16.7 ms
t = 10 ms
ITM = 6 A; IG = 0.2 A;
dIG/dt = 0.2 A/µs
T2+ G+
T2+ G-
T2- G-
T2- G+
over any 20 ms period
-
-
-
-
-
-
-
-
-
-
-
-
-
-40
-
-500
5001
MAX.
-600
6001
4
25
27
3.1
50
50
50
10
2
5
5
0.5
150
125
-800
800
UNIT
V
A
A
A
A2s
A/µs
A/µs
A/µs
A/µs
A
V
W
W
˚C
˚C
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may
switch to the on-state. The rate of rise of current should not exceed 3 A/µs.
August 1997
1
Rev 1.200

1 Page





BT-136 pdf, ピン配列
Philips Semiconductors
Triacs
Product specification
BT136 series
Ptot / W
8
BT136
Tmb(max) / C
101
7
61
5
4
3
= 180
120
90
60
30
104
107
110
113
116
www.DataSheet4U.c2om
119
1 122
0 125
012345
IT(RMS) / A
Fig.1. Maximum on-state dissipation, Ptot, versus rms
on-state current, IT(RMS), where α = conduction angle.
1000 ITSM / A
BT136
IT ITSM
T time
Tj initial = 25 C max
100
dIT/dt limit
T2- G+ quadrant
10
10us
100us
1ms
10ms
100ms
T/s
Fig.2. Maximum permissible non-repetitive peak
on-state current ITSM, versus pulse width tp, for
sinusoidal currents, tp 20ms.
ITSM / A
30
25
20
15
BT136
IT ITSM
T time
Tj initial = 25 C max
10
5
01 10 100 1000
Number of cycles at 50Hz
Fig.3. Maximum permissible non-repetitive peak
on-state current ITSM, versus number of cycles, for
sinusoidal currents, f = 50 Hz.
IT(RMS) / A
5
4
BT136
107 C
3
2
1
0-50 0 50 100 150
Tmb / C
Fig.4. Maximum permissible rms current IT(RMS) ,
versus mounting base temperature Tmb.
12 IT(RMS) / A
BT136
10
8
6
4
2
0
0.01 0.1
1
surge duration / s
10
Fig.5. Maximum permissible repetitive rms on-state
current IT(RMS), versus surge duration, for sinusoidal
currents, f = 50 Hz; Tmb 107˚C.
VGT(Tj)
1.6 VGT(25 C)
BT136
1.4
1.2
1
0.8
0.6
0.4-50
0 50 100 150
Tj / C
Fig.6. Normalised gate trigger voltage
VGT(Tj)/ VGT(25˚C), versus junction temperature Tj.
August 1997
3
Rev 1.200


3Pages


BT-136 電子部品, 半導体
Philips Semiconductors
Triacs
Product specification
BT136 series
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
www.DataSheeto4Ur .mcoomre of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
© Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
August 1997
6
Rev 1.200

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ BT-136 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BT-136

BT136

ETC
ETC
BT-139

Triacs

Philips
Philips


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap