|
|
UPG168TBのメーカーはNECです、この部品の機能は「L / S-BAND SPDT SWITCH」です。 |
部品番号 | UPG168TB |
| |
部品説明 | L / S-BAND SPDT SWITCH | ||
メーカ | NEC | ||
ロゴ | |||
このページの下部にプレビューとUPG168TBダウンロード(pdfファイル)リンクがあります。 Total 9 pages
DATA SHEET
GaAs INTEGRATED CIRCUIT
µPG168TB
L, S-BAND SPDT SWITCH
DESCRIPTION
The µPG168TB is GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which were developed for
mobile phone and another L, S-band application.
This device can operate frequency from 0.5 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin super minimold package. And this package is able to high-density surface
mounting.
FEATURES
• Switch control voltage
: Vcont (H) = 2.5 to 5.3 V (3.0 V TYP.)
: Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
• Low insertion loss
: LINS1 = 0.30 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont = 3.0 V/0 V
: LINS2 = 0.40 dB TYP. @ f = 2.0 GHz, Vcont = 3.0 V/0 V
: LINS3 = 0.90 dB MAX. @ f = 2.0 to 2.5 GHz, Vcont = 3.0 V/0 V
• High isolation
: ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, Vcont = 3.0 V/0 V
: ISL2 = 18 dB MIN. @ f = 2.0 to 2.5 GHz, Vcont = 3.0 V/0 V
• Middle power
: Pin (1 dB) = +26.5 dBm TYP. @ f = 1.0 GHz, Vcont = 3.0 V/0 V
• High-density surface mounting : 6-pin super minimold package (2.0 × 1.25 × 0.9 mm)
APPLICATIONS
• L-band digital cellular or cordless telephone
• PCS, W-LAN, WLL and BluetoothTM etc.
ORDERING INFORMATION
Part Number
µPG168TB-E4
Package
6-pin super minimold
Marking
G2T
Supplying Form
• Embossed tape 8 mm wide
• Pin 1, 2, 3 face the perforation side of the tape
• Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: µPG168TB
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
Document No. PG10359EJ01V0DS (1st edition)
Date Published March 2003 CP(K)
Printed in Japan
© NEC Compound Semiconductor Devices 2003
1 Page µPG168TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont = 3.0 V/0 V, DC cut capacitors = 51 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Input Return Loss 1
Input Return Loss 2
Output Return Loss 1
Output Return Loss 2
1 dB Gain Compression
Input Power Note
Switch Control Speed
Switch Control Current
Symbol
Test Conditions
LINS1 f = 0.5 to 1.0 GHz
LINS2 f = 2.0 GHz
LINS3 f = 2.0 to 2.5 GHz
ISL1 f = 0.5 to 2.0 GHz
ISL2 f = 2.0 to 2.5 GHz
RLin1 f = 0.5 to 2.0 GHz
RLin2 f = 2.0 to 2.5 GHz
RLout1 f = 0.5 to 2.0 GHz
RLout2 f = 2.0 to 2.5 GHz
Pin (1 dB) f = 1.0 GHz
tSW
Icont
MIN.
−
−
−
22
18
13
11
13
11
+22.0
TYP.
0.30
0.40
−
27
−
19
−
19
−
+26.5
MAX.
0.55
0.65
0.90
−
−
−
−
−
−
−
Unit
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
− 50 200 ns
− 0.5 10 µA
Note Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, Vcont = 3.0 V/0 V, DC cut capacitors = 51 pF, unless otherwise specified)
Parameter
0.1 dB Gain Compression
Input Power Note
Symbol
Test Conditions
Pin (0.1 dB) f = 1.0 GHz
MIN.
−
TYP.
+23.0
MAX.
−
Unit
dBm
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of
recommended DC cut capacitor value is less than 100 pF.
Data Sheet PG10359EJ01V0DS
3
3Pages PACKAGE DIMENSIONS
6-PIN SUPER MINIMOLD (UNIT: mm)
2.1±0.1
1.25±0.1
µPG168TB
0.1 MIN.
6 Data Sheet PG10359EJ01V0DS
6 Page | |||
ページ | 合計 : 9 ページ | ||
|
PDF ダウンロード | [ UPG168TB データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
UPG168TB | L / S-BAND SPDT SWITCH | NEC |
UPG168TB | L / S-BAND SPDT SWITCH | California Eastern Laboratories |