DataSheet.jp

AC03FGM の電気的特性と機能

AC03FGMのメーカーはNECです、この部品の機能は「(AC03DGM/FGM) 3A MOLD Triac」です。


製品の詳細 ( Datasheet PDF )

部品番号 AC03FGM
部品説明 (AC03DGM/FGM) 3A MOLD Triac
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとAC03FGMダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

AC03FGM Datasheet, AC03FGM PDF,ピン配置, 機能
DATA SHEET
THYRISTORS
AC03DGM, AC03FGM
3 A MOLD TRIAC
The AC03EGM and AC03FGM are fully diffused mold TRIACs
with an effective on-current of 3 A. The repeat peak off-voltages
are 400 V and 600 V.
PACKAGE DRAWING (UNIT: mm)
FEATURES
• Gate trigger current (mode I, III, and IV) at 12 mA or less is
guaranteed.
• This transistor features a small and lightweight package and is
easy to handle even on the mounting surface due to its TO-
202AA dimensions. Processing of lead wires and heatsink
(tablet) using jigs is also possible.
• High degrees-of-freedom applications design is available due to
high gate trigger sensitivity and small hold current distribution.
• Employs flame-retardant epoxy resin (UL94V-0).
APPLICATIONS
Noncontact switches of motor
temperature control, lamp light control
speed
control,
heater
*TC test bench-mark
Standard weight: 1.4 g
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Non-repetitive peak off-state voltage
Repetitive peak off-voltage
Effective on-state current
Symbol
VDSM
VDRM
IT(RMS)
Surge on-state current
ITSM
Fusing current
Critical rate of rise of on-state
current
Peak gate power dissipation
Average gate power dissipation
Peak gate current
Junction temperature
Storage temperature
ƒiT2dt
dIT/dt
PGM
PG(AV)
IGM
Tj
Tstg
AC03DGM
AC03FGM
500 700
400 600
3 (TC = 92°C)
30 (50 Hz 1 cycle)
33 (60 Hz 1 cycle)
4.0 (1 ms t 10 ms)
40
3 (f 50 Hz, Duty 10 %)
0.3
±0.5 (f 50 Hz, Duty 10 %)
40 to +125
55 to +150
Unit Remarks
V
V
A Refer to Figures
11 and 12.
A Refer to Figure 2.
A2S
A/µs
W
W
A
°C
°C
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D13536EJ3V0DS00 (3rd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928

1 Page





AC03FGM pdf, ピン配列
AC03DGM, AC03FGM
Data Sheet D13536EJ3V0DS
3


3Pages


AC03FGM 電子部品, 半導体
AC03DGM, AC03FGM
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ AC03FGM データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AC03FGM

(AC03DGM/FGM) 3A MOLD Triac

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap