DataSheet.jp

AC08DSMA の電気的特性と機能

AC08DSMAのメーカーはNECです、この部品の機能は「(AC08DSMA / AC08FSMA) 8A RESIN INSULATION TYPE TRIAC」です。


製品の詳細 ( Datasheet PDF )

部品番号 AC08DSMA
部品説明 (AC08DSMA / AC08FSMA) 8A RESIN INSULATION TYPE TRIAC
メーカ NEC
ロゴ NEC ロゴ 




このページの下部にプレビューとAC08DSMAダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

AC08DSMA Datasheet, AC08DSMA PDF,ピン配置, 機能
DATA SHEET
THYRISTORS
AC08DSMA,AC08FSMA
8 A RESIN INSULATION TYPE TRIAC
DESCRIPTION
The AC08DSMA and AC08FSMA are resin insulation type
TRIACs with an effective current of 8 A (TC = 88°C).
These products are covered with resin mold on the entire case
and are electrically insulated with electrodes, giving them a
considerable advantage over conventional TRIACs when
mounting on a heatsink board or performing high-density
mounting.
These products features ratings and electrical characteristics
equal to TO-220AB package TRIAC and a high reliability design.
PACKAGE DRAWING (Unit: mm)
10.5 MAX.
7 ±0.2 φ 3.2 ±0.2
4.7 MAX.
3.0 MAX.
1 23
*
FEATURES
Insulation type TRIAC fully covered with resin on the entire
case other than electrode leads
Insulation voltage and conduction equal to conventional mica
and polyester film
Can be replaced with TO-220AB package
High allowable on-current when using a single unit
0.8 ±0.1
2.54 TYP.
1.3 ±0.2 0.5 ±0.1
1.5 ±0.2
2.54 TYP. TRIAC
1: T1
2: T2
3: Gate
2.5 ±0.1
APPLICATIONS
*: TC test bench-mark
Non-contact switches of motor speed control, heater temperature control, lamp light control
Standard weight: 2 g
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. D10613EJ5V0DS00 (5th edition)
Date Published June 2004 NS CP(K)
Printed in Japan
The mark shows major revised points.
2002

1 Page





AC08DSMA pdf, ピン配列
TYPICAL CHARACTERISTICS
Figure 1. iT vs. νT CHARACTERISTIC
100
MAX.
10
TC = 125˚C
1.0
25˚C
0.1
0
1234
νT - On-state Voltage - V
5
Figure 3. GATE RATING
10
Tj = 40 to +125˚C
8
6
PGM = 5 W
f 50 Hz
4 Duty 10%
2
PG(AV) = 0.5 W
0
0 0.5 1.0 1.5 2.0 2.5 3.0
IG - Gate Current - A
1000
Figure 5. IGT vs. TA CHARACTERISTIC
Mode
I, III, IV
100
10
1
40
0
40 80 120
TA - Ambient Temperature - °C
AC08DSMA,AC08FSMA
Figure 2. ITSM RATING
140
Initial Tj = 125˚C
ITSM
0π
2π
120 N = 1
100
80 60 Hz
50 Hz
60
40
20
0
1
5 10
50 100
Cycles - N
Figure 4. GATE CHARACTERISTIC
2.0
Mode
I, III, IV
TA = 40˚C
1.5
25˚C
125˚C
1
0.5
0
0 10 20 30 40
IGT - Gate Trigger Current - mA
Figure 6. VGT vs. TA CHARACTERISTIC
1.4 Mode
I, III, IV
1.2
1.0
0.8
0.6
0.4
0.2
0
40
0
40 80 120
TA - Ambient Temperature - °C
Data Sheet D10613EJ5V0DS
3


3Pages


AC08DSMA 電子部品, 半導体
AC08DSMA,AC08FSMA
The information in this document is current as of June, 2004. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ AC08DSMA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AC08DSMA

(AC08DSMA / AC08FSMA) 8A RESIN INSULATION TYPE TRIAC

NEC
NEC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap