|
|
EE-SB5のメーカーはOMRONです、この部品の機能は「Photomicrosensor with 80-mA Switching Capacity that can be Built into Equipment」です。 |
部品番号 | EE-SB5 |
| |
部品説明 | Photomicrosensor with 80-mA Switching Capacity that can be Built into Equipment | ||
メーカ | OMRON | ||
ロゴ | |||
このページの下部にプレビューとEE-SB5ダウンロード(pdfファイル)リンクがあります。 Total 6 pages
EE-SB5M/SB5MC/SB5V/SB5VC/SB5V-E
Photomicrosensor with 80-mA
Switching Capacity that can be Built
into Equipment
Built-in amplifier
Models available with 5- to 12-VDC and
5- to 15-VDC input
CMOS- and TTL-compatible
Model with easy adjustment with an
external sensitivity adjuster (EE-SB5V)
Special connectors (EE-1001/1006) are
available
19-mm sensing distance (EE-SB5V-E)
Convert to PNP output with EE-2002
conversion connector
Ordering Information
Appearance
Sensing method
Reflective
Sensing distance
5 mm
19 mm
Output configuration
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Weight
Approx. 3.0 g
Approx. 2.8 g
Part number
EE-SB5M
EE-SB5MC
EE-SB5V
EE-SB5VC
EE-SB5V-E
Specifications
RATINGS
Item
Supply voltage
Current consumption
Maximum forward direct current (IF)
Forward voltage (VF)
Reverse voltage (VR)
Standard reference object
Differential distance
Reflective
EE-SB5M
EE-SB5MC
EE-SB5V(-E)
EE-SB5VC
5 to 12 VDC ±10%, ripple (p-p): 10% max. 5 to 15 VDC ±10%, ripple (p-p): 10% max.
36 mA max.
—
48 mA max. (DC current: IF = 25 mA)
30 mA max.
— 1.5 V max. (IF = 30 mA)
— 4 V max.
White paper with reflection factor of 90% (standard sensing object: 15 x 15 mm)
0.1 mm
(This table continues on the next page.)
1 Page EE-SB5M/SB5MC/SB5V/SB5VC/SB5V-E
Engineering Data
OPERATING RANGE (TYPICAL 1)
EE-SB5M(C) Reference object:
White paper ( 15 x 15 mm)
(reflection factor: 90%)
Releases
Operates
Optical
axis
X
Y
X (mm)
SENSING DISTANCE VS. OBJECT
AREA (TYPICAL)
EE-SB5M(C)
Reference object:
White paper ( 15 x 15 mm)
(reflection factor: 90%)
Area (mm2)
EE-SB5M/SB5MC/SB5V/SB5VC/SB5V-E
OPERATING RANGE (TYPICAL 2)
EE-SB5M(C)
Reference ob-
ject: White paper
(15 x 15 mm)
(reflection factor:
90%)
Releases
Operates
Optical
axis
X’
Y
X’ (mm)
SENSING DISTANCE VS. IF EE-SB5V-E
(TYPICAL)
20
TA = 25°C
Reference object
16 White paper:
(reflection factor 90%)
12
8
4
0 5 10 15 20 25 30
Forward Current IF (mA)
3Pages EE-SB5M/SB5MC/SB5V/SB5VC/SB5V-E
EE-SB5M/SB5MC/SB5V/SB5VC/SB5V-E
Precautions
Refer to the Technical Information Section for general
precautions.
An external sensitivity adjuster can be connected to the
EE-SB5V(C), EE-SB5V-E Photomicrosensor. When connecting
the sensitivity adjuster, insert resistor RF (current-limiting
resistor), as shown by the diagram. The value of RF is obtainable
as follows:
L
OUT
IF
Vcc
RF
External sensitivity adjuster
0V
Output
RF > (VCC - 1.5 V)/30 mA
Note: The EE-SB5V(C) and EE-SB5V-E have no constant current circuit to protect the LED. For this reason, the LED will be damaged by
excessive current applied to the positive terminal. To prevent potential LED damage, connect a current-limiting resistor, as shown
previously.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS, INC.
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
Cat. No. EO5DAX4
1/99
Specifications subject to change without notice.
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
Printed in U.S.A.
6 Page | |||
ページ | 合計 : 6 ページ | ||
|
PDF ダウンロード | [ EE-SB5 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
EE-SB5 | Photomicrosensor with 80-mA Switching Capacity that can be Built into Equipment | OMRON |