DataSheet.jp

S21ME4 の電気的特性と機能

S21ME4のメーカーはSharpです、この部品の機能は「(S21ME Series) TRIAC-OUTPUT OPTOCOUPLER」です。


製品の詳細 ( Datasheet PDF )

部品番号 S21ME4
部品説明 (S21ME Series) TRIAC-OUTPUT OPTOCOUPLER
メーカ Sharp
ロゴ Sharp ロゴ 




このページの下部にプレビューとS21ME4ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

S21ME4 Datasheet, S21ME4 PDF,ピン配置, 機能
S21ME Series
S21ME Series
European Safety Standard Approved,
Long Creepage Distance Type
Phototriac Couplers
g Lead forming type ( I type) of S21ME series is also available. (S21ME3I/ S21ME4I/ S21ME3FI/ S21ME4FI)
g Taping reel type ( P type ) of S21ME series is also available. ( S21ME3P/S21ME4P/S21ME3FP/S21ME4FP)
g DIN-VDE0884 approved type is also available as an option.
s Features
1. Long creepage distance type
( Creepage distance : 8mm or more )
2. Internal insulation distance : 0.5mm or
more
3. Description of approved safety standards
( Lead forming type is also registered as
s Outline Dimensions
(Unit : mm)
S21ME3 /S21ME4
2.54± 0.25
65
4
The S21ME3 and S21ME4 are marked
S21ME3 and S21ME4
g Zero-cross circuit (S21ME4 )
Internal connection diagram
6 54
S21ME3
g
Zero-cross
circuit
S21ME3 / S21ME4 .)
Recoginized by UL 1577 ( double protection included )
file No. E64380
Approved by VDE, No. 68328
Approved by BSI ( BS415 : No. 6690, BS7002 : No. 7421 )
Approved by SEMKO
12
Anode
mark
9.22± 0.5
3
1.2± 0.3
1 23
7.62 ±0.3
1 Anode
2 Cathode
3 NC
4 Anode/
Cathode
5 No external
connection
6 Anode/
Cathode
S21ME3 / S21ME3F No. 8705122
S21ME4 / S21ME4F No. 8705123
Approved by DEMKO, No. 84857
Approved by EI
S21ME3 / S21ME3F No. 099443-01
S21ME4 / S21ME4F No. 099444-01
4. Low minimum trigger current
( IFT : MAX. 7mA )
5. Built-in zero-cross circuit
(S21ME4 / S21ME4F)
6. Lead forming type/ S21ME3F, S21ME4F
( Distance between lead pins : 10.16mm )
7. High repetitive peak OFF-state voltage
( VDRM : MIN. 600V )
8. High isolation voltage between input and output
( Viso : 5 000Vrms )
s Applications
0.5±0.1
0.26± 0.1
θ : 0 to 13 ˚
θ
S21ME3F /S21ME4F The S21ME3F and S21ME4F are marked
S21ME3 and S21ME4
2.54± 0.25
g Zero-cross circuit (S21ME4F )
Internal connection diagram
654
6 54
S21ME3
g
Zero-cross
circuit
1
Anode
mark
2
9.22± 0.5
3
1.2±0.3
1 23
7.62± 0.3
0.26± 0.1
1 Anode
2 Cathode
3 NC
4 Anode/
Cathode
5 No external
connection
6 Anode/
Cathode
0.5± 0.1
10.16± 0.5
1. For triggering medium/high power triac
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.

1 Page





S21ME4 pdf, ピン配列
Fig. 1 RMS ON-state Current vs.
Ambient Temperature
0.10
0.05
0
- 30 0 20 40 60 80 100
Ambient temperature T a (˚C)
Fig. 3 Forward Current vs. Forward Voltage
100
50 T a = 75˚C
50˚C
20 25˚C
10
5
0˚C
- 25˚C
2
1
0.9 1.0 1.1 1.2 1.3 1.4 1.5
Forward voltage V F (V)
Fig. 5 Relative Repetitive Peak OFF-state
Voltage vs. Ambient Temperature
1.3
1.2
1.1
S21ME3/3F
1.0 S21ME4/4F
0.9
0.8
0.7
- 30
0 20 40 60 80
Ambient temperature T a (˚C)
100
S21ME Series
Fig. 2 Forward Current vs.
Ambient Temperature
70
60
50
40
30
20
10
0
- 30 0 25 50 75 100 125
Ambient temperature T a (˚C)
Fig. 4 Minimum Trigger Current vs.
Ambient Temperature
12
V D = 6V
RL = 100
10
8
6 S21ME3/3F
S21ME4/4F
4
2
0
- 30 0 20 40 60 80 100
Ambient temperature T a (˚C)
Fig. 6 ON-state Voltage vs.
Ambient Temperature
2.2
2.0
IT = 100mA
1.8
1.6 S21ME4/4F
S21ME3/3F
1.4
1.2
1.0
- 30
0 20 40 60 80
Ambient temperature T a (˚C)
100


3Pages


S21ME4 電子部品, 半導体
Application Circuits
NOTICE
qThe circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
qObserve the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
qContact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
qContact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ S21ME4 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
S21ME

European Safety Standard Approved/ Long Creepage Distance Type Phototriac Couplers

Sharp Electrionic Components
Sharp Electrionic Components
S21ME3

(S21ME Series) TRIAC-OUTPUT OPTOCOUPLER

Sharp
Sharp
S21ME4

(S21ME Series) TRIAC-OUTPUT OPTOCOUPLER

Sharp
Sharp
S21ME5

Phototriac Coupler Conformable to European Safety Standard

Sharp Electrionic Components
Sharp Electrionic Components


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap