|
|
PDF SSW-408 Data sheet ( Hoja de datos )
| Número de pieza | SSW-408 | |
| Descripción | DC-4 GHz High Power GaAs MMIC SPDT Switch | |
| Fabricantes | Stanford Microdevices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SSW-408 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
PPPrrreeellilimimmiininnaaarrryyy
Product Description
Stanford Microdevices’ SSW-408 is a high performance Gal-
lium Arsenide Field Effect Transistor MMIC switch housed in a
low-cost surface mountable small outline plastic package.
This single-pole, double-throw reflective switch consumes less
than 50uA and can operate with positive or negative 3V to 8V
supply voltages, making it suitable for use in both infrastruc-
ture and subscriber equipment. This switch can be used in all
analog and digital wireless communication systems including
(but not limited to) AMPS, PCS, DECT, IS-95, IS-136, 802.11,
CDPD and GSM.
At +5V or –5V bias, typical output power at 1dB compression
is 3 watts. 1dB output power over 4 watts and IP3 over +55dBm
may be achieved with higher control voltages.
Isolation vs. Frequency
VControl = -5 V
-10
-20
SSW-408
DC-4 GHz High Power GaAs MMIC
SPDT Switch
Product Features
• High Compression Point : up to 4 Watts
• HIgh Linearity : TOIP +55dBm @2GHz
• Low DC Power Consumption
• Low Insertion Loss : 1.2dB at 2GHz
• Operates from Positive or Negative 3V to 8V
Supplies
• Low Cost Small Outline Plastic Package
dB
-30
-40
DC
12
GHz
3
4
Applications
• Analog/Digital Wireless Communications
• Spread Spectrum
• AMPS, PCS, DECT, IS-95, IS-136, 802.11,
CDPD and GSM.
Electrical Specifications at Ta = 25C
Symbol
Parameters & Test
Conditions: Zo = 50 ohms v = +5 or -5V
Units
Min.
Typ.
Max.
Insertion Loss
Ins
Isolation
Isol
VSWR on
VSWR off
P1dB
Input & Output VSWR
(on port)
Input & Output VSWR
(off port)
Output Power @ 2.0 GHz
at 1 dB Compression
TO IP
Third Order Intercept
Id Device Current
f = 0.05 - 1.0 GHz
f = 1.00 - 2.0 GHz
f = 2.00 - 4.00 GHz
f = 0.05 - 1.0 GHz
f = 1.00 - 2.0 GHz
f = 2.00 - 4.00 GHz
f = 0.05 - 2.0 GHz
f = 2.00 - 4.0 GHz
f = 0.05 - 2.0 GHz
f = 2.00 - 4.0 GHz
V = +8V or -8V
V = +5V or -5V
V = +3V or -3V
V = +8V or -8V
V = +5V or -5V
V = +3V or -3V
dB 0.9 1.3
dB 1.2 1.5
dB 1.5
dB 24 28
dB 18 22
dB 18
1.2
1.5
1.2
1.5
dB +36
dB +34
dB +31
dB +55
dB +53
dB +50
uA 40
Isw
Switching Speed
10% to 90% or 90% to 10%
nsec
10
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or omissions.
Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford
Microdevices product for use in life-support devices and/or systems.
Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC
http://www.stanfordmicro.com
EDS-101099 Rev -A
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SSW-408.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SSW-408 | DC-4 GHz High Power GaAs MMIC SPDT Switch | Stanford Microdevices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |